In this review, we will be comparing S20 and Reva 1, two Passive Bookshelf speakers from Polk Audio and Wharfedale. Let's have a brief look at the main features
of Polk S20 and Wharfedale Reva 1 first before getting into our more
detailed comparison.
What size room are the Polk S20 and Wharfedale Reva 1 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk S20 and Wharfedale Reva 1 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both S20 and Reva 1 are 2-way speakers.
Driver |
Polk S20 |
Wharfedale Reva 1 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 4.5-inch
|
S20 features a 1" Terylene Soft-Dome Tweeter and 1 x 6.5" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz. On the other hand, the Reva 1 features a 1" woven textile Dome Tweeter and 1 x 4.5" Woven Glass Fiber Woofer .
Frequency Response
S20 has a frequency range of 39-40k Hz whereas Reva 1 has a frequency range of 52-20k Hz. With a minimum frequency of 39Hz, the S20 can go significantly deeper on the low side and provide stronger bass compared to the Reva 1's min frequency of 52Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
S20 and Reva 1 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. S20 sensitivity is rated at 88 dB and the Reva 1's is at 86 dB. This 2 dB difference makes the Polk S20 a more sensitive speaker compared to Wharfedale Reva 1, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
S20 can handle a max power of 125 watts RMS from the amp the whereas Reva 1 has a max power handling value of 60 watts RMS, 65 watts less than the S20.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Reva 1 features Post posts which make bi-amping or bi-wiring possible. S20 has a 5-way post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
S20 has a rear firing port whereas Reva 1 has a bottom firing ports. Wharfedale Reva 1's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Polk S20 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk S20's and Wharfedale Reva 1's external dimensions. Polk S20 has external dimensions of 376.0 x 216.0 x 350.0mm ( 14.8 x 8.5 x 13.7inch) whereas Wharfedale Reva 1 has external dimensions of 318.0 x 174.0 x 285.0mm ( 12-1/2 x 6-13/16 x 11-3/16inch) .
Polk S20 is clearly the larger of the two speakers. Its body is 42mm wider, 58mm taller and 65mm deeper than Wharfedale Reva 1.
Below you can see the front view size comparison of Polk S20 and Wharfedale Reva 1 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk S20 is approximately 756.0cm2 / 117.2inch2 and base area of the Wharfedale Reva 1 is approximately 495.9cm2 / 76.9inch2. The S20 requires 52% more surface area than the Reva 1 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk S20 weighs 7.73kg / 17lbs and the Wharfedale Reva 1 weighs 5.64kg / 12.4lbs. This makes the S20 37% heavier than the Reva 1.
Here is a comparison of how S20 and Reva 1's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk S20?
Here are the items that are included inside the box of S20:
2 Bookshelf loudspeakers2 Grilles (attached)8 Self-adhesive rubber feetOwners ManualOnline Product Registration
What's in the Box of Wharfedale Reva 1?
Here are the items that come with the Reva 1:
2 Bookshelf loudspeakers2 Grilles (pre-installed)8 Self-adhesive rubber feet4 Jumper bars (pre-installed)Pair of white glovesUser-feets Manual
Max Input Power |
125 watts
vs
60 watts
|
Handle more power from your amplifier |
Sensitivity |
88 dB
vs
86 dB
|
Play louder with same amount of amplification power |
Woofer Size |
6.5 inches
vs
4.5 inches
|
Larger woofer |
Low Frequency Response |
39 Hz
vs
52 Hz
|
Generates deeper bass |
High Frequency Response |
40k Hz
vs
20k Hz
|
Generates higher frequency |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Height |
318mm
vs
376mm
|
Easier to fit in smaller spaces |
Base Surface Area |
495cm2 (174x285mm)
vs
756cm2 (216x350mm)
|
Takes less floor space |
General |
Polk Audio Signature S20 |
Wharfedale Reva 1 |
Brand |
Polk Audio |
Wharfedale |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
20-125 watts |
20-60 watts |
Sensitivity |
88 dB |
86 dB |
Impedance |
8 ohms |
8 ohms |
Frequency Response |
39-40k Hz |
52-20k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
4.5" |
Woofer Composition |
Mica-reinforced polypropylene |
Woven Glass Fiber |
Woofer Surround Material |
Butyl rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Soft-Dome |
Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2500Hz |
n/a |
Firing Direction |
rear |
bottom |
Physical Specs |
|
|
Height |
376.0mm (14.8") |
318.0mm (12.5") |
Width |
216.0mm (8.5") |
174.0mm (6.9") |
Depth |
350.0mm (13.8") |
285.0mm (11.2") |
Weight |
7.73kg (17lbs) |
5.64kg (12.4lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
Meddite MDF |
Wood composite laminate |
Available Colors |
Black, Walnut, Brown Walnut |
Walnut |
Mounting Bracket |
No |
No |
Recommended Stand Height |
24-28" |
28-30" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |