In this review, we will be comparing S20 and 705 S2, two Passive Bookshelf speakers from Polk Audio and Bowers Wilkins. Let's have a brief look at the main features
of Polk S20 and B&W 705 S2 first before getting into our more
detailed comparison.
What size room are the Polk S20 and B&W 705 S2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk S20 and B&W 705 S2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both S20 and 705 S2 are 2-way speakers.
Driver |
Polk S20 |
B&W 705 S2 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
S20 features a 1" Terylene Soft-Dome Tweeter and 1 x 6.5" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz. On the other hand, the 705 S2 features a 1" Solid Body Soft-Dome Tweeter and 1 x 6.5" Continuum Woofer .
Frequency Response
S20 has a frequency range of 39-40k Hz whereas 705 S2 has a frequency range of 50-28k Hz. With a minimum frequency of 39Hz, the S20 can go significantly deeper on the low side and provide stronger bass compared to the 705 S2's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
S20 and 705 S2 have the same Impedance of 8 ohms and their sensitivity is also same at 88 dB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
S20 can handle a max power of 125 watts RMS from the amp the whereas 705 S2 has a max power handling value of 120 watts RMS, 5 watts less than the S20.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
705 S2 features Binding post posts which make bi-amping or bi-wiring possible. S20 has a 5-way post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both S20 and 705 S2 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk S20's and B&W 705 S2's external dimensions. Polk S20 has external dimensions of 376.0 x 216.0 x 350.0mm ( 14.8 x 8.5 x 13.7inch) whereas B&W 705 S2 has external dimensions of 407.0 x 200.0 x 301.0mm ( 16-inch x 7.8-inch x 11.9-inch) .
B&W 705 S2 is 16mm narrower and 49mm less deeper than Polk S20 but it is also 31mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk S20 is approximately 756.0cm2 / 117.2inch2 and base area of the B&W 705 S2 is approximately 602.0cm2 / 93.3inch2. The S20 requires 26% more surface area than the 705 S2 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk S20 weighs 7.73kg / 17lbs and the B&W 705 S2 weighs 9.32kg / 20.5lbs. This makes the 705 S2 21% heavier than the S20.
Here is a comparison of how S20 and 705 S2's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk S20?
Here are the items that are included inside the box of S20:
2 Bookshelf loudspeakers2 Grilles (attached)8 Self-adhesive rubber feetOwners ManualOnline Product Registration
What's in the Box of B&W 705 S2?
Here are the items that come with the 705 S2:
2 Bookshelf loudspeakers2 Grilles2 Two-piece foam port plugs8 Self-adhesive rubber feet4 Jumper-straps Manual Bowers & Wilkins brochureWarranty Information
Max Input Power |
125 watts
vs
120 watts
|
Handle more power from your amplifier |
Low Frequency Response |
39 Hz
vs
50 Hz
|
Generates deeper bass |
High Frequency Response |
40k Hz
vs
28k Hz
|
Generates higher frequency |
Height |
376mm
vs
407mm
|
Easier to fit in smaller spaces |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Base Surface Area |
602cm2 (200x301mm)
vs
756cm2 (216x350mm)
|
Takes less floor space |
General |
Polk Audio Signature S20 |
Bowers & Wilkins 705 S2 |
Brand |
Polk Audio |
Bowers Wilkins |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
20-125 watts |
30-120 watts |
Sensitivity |
88 dB |
88 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
n/a |
3.1 ohms |
Frequency Response |
39-40k Hz |
50-28k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
6.5" |
Woofer Composition |
Mica-reinforced polypropylene |
Continuum |
Woofer Surround Material |
Butyl rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Soft-Dome |
Solid Body Soft-Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2500Hz |
n/a |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
376.0mm (14.8") |
407.0mm (16") |
Width |
216.0mm (8.5") |
200.0mm (7.9") |
Depth |
350.0mm (13.8") |
301.0mm (11.9") |
Weight |
7.73kg (17lbs) |
9.32kg (20.5lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
Meddite MDF |
MDF/Wood veneer |
Available Colors |
Black, Walnut, Brown Walnut |
Rosewood, Gloss Black, Satin White |
Mounting Bracket |
No |
No |
Recommended Stand Height |
24-28" |
24-26" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |