In this review, we will be comparing MilleniaOne 1.0 and RP-600M, two Passive Bookshelf speakers from Paradigm and Klipsch. Let's have a brief look at the main features
of Paradigm MilleniaOne 1.0 and Klipsch RP-600M first before getting into our more
detailed comparison.
What size room are the Paradigm MilleniaOne 1.0 and Klipsch RP-600M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Paradigm MilleniaOne 1.0 and Klipsch RP-600M compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both MilleniaOne 1.0 and RP-600M are 2-way speakers.
Driver |
Paradigm MilleniaOne 1.0 |
Klipsch RP-600M |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 4-inch
|
1 x 6.5-inch
|
MilleniaOne 1.0 features a 1" Hard-Dome Tweeter and 1 x 4" S-PAL Aluminum Woofer . On the other hand, the RP-600M features a 1" Tractrix Horn Tweeter and 1 x 6.5" Cerametallic Woofer with a Crossover frequency at 1500Hz.
Frequency Response
MilleniaOne 1.0 has a frequency range of 120-20k Hz whereas RP-600M has a frequency range of 45-25k Hz. With a minimum frequency of 45Hz, the RP-600M can go significantly deeper on the low side and provide stronger bass compared to the MilleniaOne 1.0's min frequency of 120Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
MilleniaOne 1.0 and RP-600M have the same Impedance of 8 ohms but where they differ is the sensitivity levels. MilleniaOne 1.0 sensitivity is rated at 89 dB and the RP-600M's is at 96 dB. This 7 dB difference makes the Klipsch RP-600M a more sensitive speaker compared to Paradigm MilleniaOne 1.0, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-600M features Dual binding posts/bi-wire/bi-amp posts which make bi-amping or bi-wiring possible. MilleniaOne 1.0 has a Spring post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both MilleniaOne 1.0 and RP-600M have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Paradigm MilleniaOne 1.0's and Klipsch RP-600M's external dimensions. Paradigm MilleniaOne 1.0 has external dimensions of 197.0 x 116.0 x 147.0mm ( 7-3/4 x 4-9/16 x 5-3/4inch) whereas Klipsch RP-600M has external dimensions of 399.0 x 202.0 x 301.0mm ( 15.7 x 7.9 x 11.8inch) .
Klipsch RP-600M is clearly the larger of the two speakers. Its body is 86mm wider, 202mm taller and 154mm deeper than Paradigm MilleniaOne 1.0.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Paradigm MilleniaOne 1.0 is approximately 170.5cm2 / 26.4inch2 and base area of the Klipsch RP-600M is approximately 608.0cm2 / 94.2inch2. The MilleniaOne 1.0 requires 72% less surface area than the RP-600M which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Paradigm MilleniaOne 1.0 weighs 2.45kg / 5.4lbs and the Klipsch RP-600M weighs 7.30kg / 16.1lbs. This makes the RP-600M 198% heavier than the MilleniaOne 1.0.
Here is a comparison of how MilleniaOne 1.0 and RP-600M's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Paradigm MilleniaOne 1.0?
Here are the items that are included inside the box of MilleniaOne 1.0:
Satellite loudspeaker
Grille
Tabletop stand
Wall-bracket
Owner's Manual
Online Registration Card
What's in the Box of Klipsch RP-600M?
Here are the items that come with the RP-600M:
2 Bookshelf loudspeakers2 Grilles (installed)8 Self-adhesive rubber feet4 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information
Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
Height |
197mm
vs
399mm
|
Easier to fit in smaller spaces |
Base Surface Area |
170cm2 (116x147mm)
vs
608cm2 (202x301mm)
|
Takes less floor space |
Sensitivity |
96 dB
vs
89 dB
|
Play louder with same amount of amplification power |
Woofer Size |
6.5 inches
vs
4 inches
|
Larger woofer |
Low Frequency Response |
45 Hz
vs
120 Hz
|
Generates deeper bass |
High Frequency Response |
25k Hz
vs
20k Hz
|
Generates higher frequency |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Price per pair* |
369USD
vs
700USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Paradigm MilleniaOne 1.0 |
Klipsch Reference Premiere RP-600M |
Brand |
Paradigm |
Klipsch |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
15-100 watts |
up to 100 watts |
Sensitivity |
89 dB |
96 dB |
Impedance |
8 ohms |
8 ohms |
Frequency Response |
120-20k Hz |
45-25k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
4" |
6.5" |
Woofer Composition |
S-PAL Aluminum |
Cerametallic |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Hard-Dome |
Tractrix Horn |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
n/a |
1500Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
197.0mm (7.8") |
399.0mm (15.7") |
Width |
116.0mm (4.6") |
202.0mm (8") |
Depth |
147.0mm (5.8") |
301.0mm (11.9") |
Weight |
2.45kg (5.4lbs) |
7.30kg (16.1lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
Die-cast aluminum |
MDF/Wood-grain vinyl |
Available Colors |
Gloss Black,Gloss White |
Ebony, Walnut, Piano Black |
Mounting Bracket |
Yes |
No |
Recommended Stand Height |
30-32" |
22-26" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |