In this review, we will be comparing Bronze 2 and Chorus 706, two Passive Bookshelf speakers from Monitor Audio and Focal.
Let's have a brief look at the main features
of Monitor Audio Bronze 2 and Focal Chorus 706 first before getting into our more
detailed comparison.
Monitor Audio Bronze 2 Key Specs
- 2-way Design
- 1" Dome Tweeter
- 6.5" C-CAM Woofer
- 42-30k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:30-100watts
- Weight:5.30kg
- Dimensions (H x W x D): 350.0" x 7.2" x 11.0"( 350.0 x 185.0 x 281.0mm )
Focal Chorus 706 Key Specs
- 2-way Design
- 1" inverted dome Tweeter
- 6.5" Polyglass Woofer
- 55-28k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:25 - 120watts
- Weight:8.20kg
- Dimensions (H x W x D): 390.0" x 8.7" x 10.4"( 390.0 x 220.0 x 263.0mm )
What size room are the Monitor Audio Bronze 2 and Focal Chorus 706 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Monitor Audio Bronze 2 |
Focal Chorus 706 |
| Near-field |
Average |
Poor |
| Small Room |
Good |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Average |
| Very Large Room |
Bad |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Bronze 2 and Focal Chorus 706 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Bronze 2 and Chorus 706 are 2-way speakers.
| Driver |
Monitor Audio Bronze 2 |
Focal Chorus 706 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
Bronze 2 features a 1" Dome Tweeter and 1 x 6.5" C-CAM Woofer with a Crossover frequency at 3100Hz. On the other hand, the Chorus 706 features a 1" TNV2 AI/Mg inverted dome Tweeter and 1 x 6.5" Polyglass Woofer with a Crossover frequency at 3000Hz.
Frequency Response
Bronze 2 has a frequency range of 42-30k Hz whereas Chorus 706 has a frequency range of 55-28k Hz. With a minimum frequency of 42Hz, the Bronze 2 can go significantly deeper on the low side and provide stronger bass compared to the Chorus 706's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Bronze 2 and Chorus 706 have the same Impedance of 8 ohms and their sensitivity is also same at 90 dB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Bronze 2 can handle a max power of 120 watts RMS from the amp the whereas Bronze 2 has a max power handling value of 100 watts RMS , 20 watts less than the Chorus 706.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Bronze 2 features Post posts which make bi-amping or bi-wiring possible. Chorus 706 has a Binding post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both Bronze 2 and Chorus 706 have front firing ports. front ported speakers offers more flexibility in placement in regards to proximity to walls&surfaces compared to rear ported speakers.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Bronze 2's and Focal Chorus 706's external dimensions. Monitor Audio Bronze 2 has external dimensions of 350.0 x 185.0 x 281.0mm ( 13.7 x 7.2 x 11.0inch) whereas Focal Chorus 706 has external dimensions of 390.0 x 220.0 x 263.0mm ( 15.4 x 8.7 x 10.4inch) .
Monitor Audio Bronze 2 is 35mm narrower and 40mm shorter than Focal Chorus 706 but it is also 18mm deeper.
Below you can see the front view size comparison of Monitor Audio Bronze 2 and Focal Chorus 706 in scale.
Comparison image of Monitor Audio Bronze 2 and Focal Chorus 706 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Bronze 2 is approximately 519.9cm2 / 80.6inch2 and base area of the Focal Chorus 706 is approximately 578.6cm2 / 89.7inch2. The Bronze 2 requires 10% less surface area than the Chorus 706 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Monitor Audio Bronze 2 and Focal Chorus 706 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Bronze 2 weighs 5.30kg / 11.7lbs and the Focal Chorus 706 weighs 8.20kg / 18lbs. This makes the Chorus 706 55% heavier than the Bronze 2.
Here is a comparison of how Bronze 2 and Chorus 706's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Monitor Audio Bronze 2?
Here are the items that are included inside the box of Bronze 2:
2 Bookshelf loudspeakers 2 Grilles 2 Foam port plugs Hex-key Owner's Manual Important Safety Instructions
What's in the Box of Focal Chorus 706?
Here are the items that come with the Chorus 706:
2 Bookshelf loudspeakers 2 Cloth grilles (attached) User manual
 Low Frequency Response |
42 Hz
vs
55 Hz
|
Generates deeper bass |
 High Frequency Response |
30k Hz
vs
28k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
350mm
vs
390mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
519cm2
vs
578cm2
|
Takes less floor space |
 Max Input Power |
120 watts
vs
100 watts
|
Handle more power from your amplifier |
| General |
Monitor Audio Bronze 2 |
Focal Chorus 706 |
| Brand |
Monitor Audio |
Focal |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
30-100 watts |
25 - 120 watts |
| Sensitivity |
90 dB |
90 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
n/a |
3.6 ohms |
| Frequency Response |
42-30k Hz |
55-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
C-CAM |
Polyglass |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Dome |
inverted dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
3100Hz |
3000Hz |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
350.0mm (13.8") |
390.0mm (15.4") |
| Width |
185.0mm (7.3") |
220.0mm (8.7") |
| Depth |
281.0mm (11.1") |
263.0mm (10.4") |
| Weight |
5.30kg (11.7lbs) |
8.20kg (18lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
Lacquer/Leatherette |
| Available Colors |
Walnut, White, Rosemah, Black |
Rosewood, Walnut, Black |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
30-31" |
24-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 |
| Labor Warranty |
5 Years |
5 |