In this review, we will be comparing Bronze 2 and Debut 2.0 B6.2, two Passive Bookshelf speakers from Monitor Audio and ELAC. Let's have a brief look at the main features
of Monitor Audio Bronze 2 and ELAC Debut 2.0 B6.2 first before getting into our more
detailed comparison.
What size room are the Monitor Audio Bronze 2 and ELAC Debut 2.0 B6.2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Bronze 2 and ELAC Debut 2.0 B6.2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Bronze 2 and Debut 2.0 B6.2 are 2-way speakers.
Driver |
Monitor Audio Bronze 2 |
ELAC Debut 2.0 B6.2 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
Bronze 2 features a 1" Dome Tweeter and 1 x 6.5" C-CAM Woofer with a Crossover frequency at 3100Hz. On the other hand, the Debut 2.0 B6.2 features a 1" Cloth Soft-Dome Tweeter and 1 x 6.5" Woven Aramid-Fiber Woofer with a Crossover frequency at 2200Hz.
Frequency Response
Bronze 2 has a frequency range of 42-30k Hz whereas Debut 2.0 B6.2 has a frequency range of 44-35k Hz. With a minimum frequency of 42Hz, the Bronze 2 can go slightly deeper then the Debut 2.0 B6.2's min frequency of 44Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Bronze 2 is a 8 ohms speaker compared to the Debut 2.0 B6.2 which has a nominal impedance of 6 ohms.
These two speakers also have different sensitivity levels. Bronze 2 sensitivity is rated at 90 dB and the Debut 2.0 B6.2's is rated at 87 dB. This 3 dB difference makes the Monitor Audio Bronze 2 a more sensitive speaker compared to ELAC Debut 2.0 B6.2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Bronze 2 can handle a max power of 120 watts RMS from the amp the whereas Bronze 2 has a max power handling value of 100 watts RMS , 20 watts less than the Debut 2.0 B6.2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Bronze 2 features Post posts which make bi-amping or bi-wiring possible. Debut 2.0 B6.2 has a 5-Way post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both Bronze 2 and Debut 2.0 B6.2 have front firing ports. front ported speakers offers more flexibility in placement in regards to proximity to walls&surfaces compared to rear ported speakers.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Bronze 2's and ELAC Debut 2.0 B6.2's external dimensions. Monitor Audio Bronze 2 has external dimensions of 350.0 x 185.0 x 281.0mm ( 13.7 x 7.2 x 11.0inch) whereas ELAC Debut 2.0 B6.2 has external dimensions of 375.0 x 195.0 x 268.0mm ( 14.7 x 7.6 x 10.5inch) .
Monitor Audio Bronze 2 is 10mm narrower and 25mm shorter than ELAC Debut 2.0 B6.2 but it is also 13mm deeper.
Below you can see the front view size comparison of Monitor Audio Bronze 2 and ELAC Debut 2.0 B6.2 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Bronze 2 is approximately 519.9cm2 / 80.6inch2 and base area of the ELAC Debut 2.0 B6.2 is approximately 522.6cm2 / 81.0inch2. The Bronze 2 requires 1% less surface area than the Debut 2.0 B6.2 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Bronze 2 weighs 5.30kg / 11.7lbs and the ELAC Debut 2.0 B6.2 weighs 7.40kg / 16.3lbs. This makes the Debut 2.0 B6.2 40% heavier than the Bronze 2.
Here is a comparison of how Bronze 2 and Debut 2.0 B6.2's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Monitor Audio Bronze 2?
Here are the items that are included inside the box of Bronze 2:
2 Bookshelf loudspeakers 2 Grilles 2 Foam port plugs Hex-key Owner's Manual Important Safety Instructions
What's in the Box of ELAC Debut 2.0 B6.2?
Here are the items that come with the Debut 2.0 B6.2:
2 Bookshelf loudspeakers2 GrillesOperating Instructions
Sensitivity |
90 dB
vs
87 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
Low Frequency Response |
42 Hz
vs
44 Hz
|
Generates deeper bass |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Height |
350mm
vs
375mm
|
Easier to fit in smaller spaces |
Base Surface Area |
519cm2 (185x281mm)
vs
522cm2 (195x268mm)
|
Takes less floor space |
Max Input Power |
120 watts
vs
100 watts
|
Handle more power from your amplifier |
High Frequency Response |
35k Hz
vs
30k Hz
|
Generates higher frequency |
General |
Monitor Audio Bronze 2 |
ELAC Debut 2.0 B6.2 |
Brand |
Monitor Audio |
ELAC |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
30-100 watts |
up to 120 watts |
Sensitivity |
90 dB |
87 dB |
Impedance |
8 ohms |
6 ohms |
Frequency Response |
42-30k Hz |
44-35k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
6.5" |
Woofer Composition |
C-CAM |
Woven Aramid-Fiber |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Dome |
Soft-Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
3100Hz |
2200Hz |
Firing Direction |
front |
front |
Physical Specs |
|
|
Height |
350.0mm (13.8") |
375.0mm (14.8") |
Width |
185.0mm (7.3") |
195.0mm (7.7") |
Depth |
281.0mm (11.1") |
268.0mm (10.6") |
Weight |
5.30kg (11.7lbs) |
7.40kg (16.3lbs) |
Enclosure |
Bass Reflex |
Ported |
Finish |
MDF/Wood-grain vinyl |
MDF/Vinyl |
Available Colors |
Walnut, White, Rosemah, Black |
Black |
Mounting Bracket |
No |
No |
Recommended Stand Height |
30-31" |
24-28" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
No |
Other |
|
|
Parts Warranty |
5 Years |
3 Years |
Labor Warranty |
5 Years |
3 Years |