In this review, we will be comparing Bronze 1 and Uni-Fi UB5, two Passive Bookshelf speakers from Monitor Audio and ELAC.
Let's have a brief look at the main features
of Monitor Audio Bronze 1 and ELAC Uni-Fi UB5 first before getting into our more
detailed comparison.
Monitor Audio Bronze 1 Key Specs
- 2-way Design
- 1" Dome Tweeter
- 5.5" C-CAM Woofer
- 55-30k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:20-70watts
- Weight:3.50kg
- Dimensions (H x W x D): 260.0" x 6.4" x 8.0"( 260.0 x 165.0 x 205.0mm )
ELAC Uni-Fi UB5 Key Specs
- 3-way Design
- 1" Soft-dome Tweeter
- 4" Midrange
- 5.25" Aluminum Woofer
- 4" Midrange
- 46-25k Hz Frequency Response
- 85 dB Sensitivity
- Impedance: 4ohms
- Power Range:40-140watts
- Weight:7.48kg
- Dimensions (H x W x D): 324.0" x 7.8" x 10.7"( 324.0 x 200.0 x 273.0mm )
What size room are the Monitor Audio Bronze 1 and ELAC Uni-Fi UB5 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Monitor Audio Bronze 1 |
ELAC Uni-Fi UB5 |
| Near-field |
Good |
Poor |
| Small Room |
Good |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Average |
| Very Large Room |
No way |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Bronze 1 and ELAC Uni-Fi UB5 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Bronze 1 is a 2-way design whereas the Uni-Fi UB5 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Monitor Audio Bronze 1 |
ELAC Uni-Fi UB5 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 4-inch |
|
Woofer
|
1 x 5.5-inch
|
1 x 5.25-inch
|
Bronze 1 features a 1" Dome Tweeter and 1 x 5.5" C-CAM Woofer with a Crossover frequency at 2700Hz. On the other hand, the Uni-Fi UB5 features a 1" Soft-dome Tweeter , a 4" Midrange and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 270Hz and 2700Hz.
Frequency Response
Bronze 1 has a frequency range of 55-30k Hz whereas Uni-Fi UB5 has a frequency range of 46-25k Hz. With a minimum frequency of 46Hz, the Uni-Fi UB5 can go significantly deeper on the low side and provide stronger bass compared to the Bronze 1's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Bronze 1 is a 8 ohms speaker compared to the Uni-Fi UB5 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Uni-Fi UB5 can provide this impedance level.
These two speakers also have different sensitivity levels. Bronze 1 sensitivity is rated at 88 dB and the Uni-Fi UB5's is rated at 85 dB. This 3 dB difference makes the Monitor Audio Bronze 1 a more sensitive speaker compared to ELAC Uni-Fi UB5, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Bronze 1 can handle a max power of 140 watts RMS from the amp the whereas Bronze 1 has a max power handling value of 70 watts RMS , 70 watts less than the Uni-Fi UB5.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Bronze 1 features Post type posts and Uni-Fi UB5 has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
Monitor Audio Bronze 1's Post terminals
ELAC Uni-Fi UB5's Post terminals
Cabinet Type and Port Position
Both Bronze 1 and Uni-Fi UB5 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Monitor Audio Bronze 1 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Bronze 1's and ELAC Uni-Fi UB5's external dimensions. Monitor Audio Bronze 1 has external dimensions of 260.0 x 165.0 x 205.0mm ( 10.2 x 6.4 x 8.0inch) whereas ELAC Uni-Fi UB5 has external dimensions of 324.0 x 200.0 x 273.0mm ( 12.7 x 7.8 x 10.7inch) .
ELAC Uni-Fi UB5 is clearly the larger of the two speakers. Its body is 35mm wider, 64mm taller and 68mm deeper than Monitor Audio Bronze 1.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Bronze 1 is approximately 338.3cm2 / 52.4inch2 and base area of the ELAC Uni-Fi UB5 is approximately 546.0cm2 / 84.6inch2. The Bronze 1 requires 38% less surface area than the Uni-Fi UB5 which gives it a small advantage on placement in tight spaces.