In this review, we will be comparing Debut 2.0 B6.2 and RP-400M, two Passive Bookshelf speakers from ELAC and Klipsch.
Let's have a brief look at the main features
of ELAC Debut 2.0 B6.2 and Klipsch RP-400M first before getting into our more
detailed comparison.
| Key Specs | ELAC Debut 2.0 B6.2 | Klipsch RP-400M |
|---|
| Brand | ELAC
Germany · founded 1926 | Klipsch
United States · founded 1946 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1" Soft-Dome | 1" Tractrix Horn |
|---|
| Woofer | 6.5" Woven Aramid-Fiber | 4" Cerametallic |
|---|
| Frequency response | 44-35k Hz | 52-25k Hz |
|---|
| Sensitivity | 87 dB | 93 dB |
|---|
| Impedance | 6 ohms | 8 ohms |
|---|
| Power range | up to 120 watts | up to 50 watts |
|---|
| Weight | 7.40kg / 16.3lbs | 4.10kg / 9lbs |
|---|
| Dimensions (H x W x D) | 14.8" x 7-3/4" x 10-9/16"
375.0 x 195.0 x 268.0mm | 11.7" x 5.6" x 7.5"
298.0 x 144.0 x 191.0mm |
|---|
What size room are the ELAC Debut 2.0 B6.2 and Klipsch RP-400M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
ELAC Debut 2.0 B6.2 |
Klipsch RP-400M |
| Near-field |
Poor |
Good |
| Small Room |
Average |
Good |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Poor |
| Very Large Room |
Poor |
No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both Debut 2.0 B6.2 and RP-400M are 2-way speakers.
ELAC Debut 2.0 B6.2Klipsch RP-400M
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
ELAC Debut 2.0 B6.2 |
Klipsch RP-400M |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 4-inch
|
Debut 2.0 B6.2 features a 1" Cloth Soft-Dome Tweeter and 1 x 6.5" Woven Aramid-Fiber Woofer with a Crossover frequency at 2200Hz. On the other hand, the RP-400M features a 1" Tractrix Horn Tweeter and 1 x 4" Cerametallic Woofer with a Crossover frequency at 1500Hz.
Frequency Response
Debut 2.0 B6.2 has a frequency range of 44-35k Hz whereas RP-400M has a frequency range of 52-25k Hz. With a minimum frequency of 44Hz, the Debut 2.0 B6.2 can go significantly deeper on the low side and provide stronger bass compared to the RP-400M's min frequency of 52Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Debut 2.0 B6.2 is a 6 ohms speaker compared to the RP-400M which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. Debut 2.0 B6.2 sensitivity is rated at 87 dB and the RP-400M's is rated at 93 dB. This 6 dB difference makes the Klipsch RP-400M a more sensitive speaker compared to ELAC Debut 2.0 B6.2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Debut 2.0 B6.2 can handle a max power of 120 watts RMS, whereas RP-400M has a max power handling value of 50 watts RMS, 70 watts less than the Debut 2.0 B6.2.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Debut 2.0 B6.2 features Single binding posts type posts and RP-400M has a Single binding posts type posts. None of these speakers feature bi-amping/bi-wiring.
ELAC Debut 2.0 B6.2's 5-Way post terminals
Klipsch RP-400M's Single binding posts terminals
Cabinet Type and Port Position
Debut 2.0 B6.2 has a front firing port whereas RP-400M has a rear firing ports. ELAC Debut 2.0 B6.2's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch RP-400M with its rear-firing port.
Klipsch RP-400M Tractrix horn-shaped Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut 2.0 B6.2's and Klipsch RP-400M's external dimensions. ELAC Debut 2.0 B6.2 has external dimensions of 375.0 x 195.0 x 268.0mm (14.7 x 7.6 x 10.5inch) whereas Klipsch RP-400M has external dimensions of 298.0 x 144.0 x 191.0mm (11.7 x 5.6 x 7.5inch).
ELAC Debut 2.0 B6.2 is clearly the larger of the two speakers. Its body is 51mm wider, 77mm taller and 77mm deeper than Klipsch RP-400M.
Below you can see the front view size comparison of ELAC Debut 2.0 B6.2 and Klipsch RP-400M in scale.
Comparison image of ELAC Debut 2.0 B6.2 and Klipsch RP-400M Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Debut 2.0 B6.2 is approximately 522.6cm2 / 81.0inch2 and base area of the Klipsch RP-400M is approximately 275.0cm2 / 42.6inch2. The Debut 2.0 B6.2 requires 90% more surface area than the RP-400M which gives it a small disadvantage on placement in tight spaces.
Here is another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of ELAC Debut 2.0 B6.2 and Klipsch RP-400M on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The ELAC Debut 2.0 B6.2 weighs 7.40kg / 16.3lbs and the Klipsch RP-400M weighs 4.10kg / 9lbs. This makes the Debut 2.0 B6.2 80% heavier than the RP-400M.
Here is a comparison of how Debut 2.0 B6.2 and RP-400M's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of ELAC Debut 2.0 B6.2?
Here are the items that are included inside the box of Debut 2.0 B6.2:
- 2 Bookshelf loudspeakers
- 2 Grilles
- Operating Instructions
What's in the Box of Klipsch RP-400M?
Here are the items that come with the RP-400M:
- 2 Bookshelf loudspeakers
- 2 Grilles (installed)
- 8 Self-adhesive rubber feet
- User Manual
- Important Safety Instructions
- Warranty Information
 Max Input Power |
120 watts
vs
50 watts
|
Handle more power from your amplifier |
 Woofer Size |
6.5 inches
vs
4 inches
|
Larger woofer |
|
Low Frequency Response |
44 Hz
vs
52 Hz
|
Generates deeper bass |
 High Frequency Response |
35k Hz
vs
25k Hz
|
Generates higher frequency |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Sensitivity |
93 dB
vs
87 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
 Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
 Height |
298mm
vs
375mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
275cm2
vs
522cm2
|
Takes less floor space |
 Price per pair* |
399USD
vs
400USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
ELAC Debut 2.0 B6.2 |
Klipsch Reference Premiere RP-400M |
| Brand |
ELAC |
Klipsch |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
up to 120 watts |
up to 50 watts |
| Sensitivity |
87 dB |
93 dB |
| Impedance |
6 ohms |
8 ohms |
| Frequency Response |
44-35k Hz |
52-25k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
4" |
| Woofer Composition |
Woven Aramid-Fiber |
Cerametallic |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2200Hz |
1500Hz |
| Firing Direction |
front |
rear |
Physical Specs |
|
|
| Height |
375.0mm (14.8") |
298.0mm (11.7") |
| Width |
195.0mm (7.7") |
144.0mm (5.7") |
| Depth |
268.0mm (10.6") |
191.0mm (7.5") |
| Weight |
7.40kg (16.3lbs) |
4.10kg (9lbs) |
| Enclosure |
Ported |
Bass Reflex |
| Finish |
MDF/Vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
Ebony, Walnut, Piano Black |
| Mounting Bracket |
No |
Keyhole |
| Recommended Stand Height |
24-28" |
28-30" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
3 Years |
5 Years |
| Labor Warranty |
3 Years |
5 Years |
No single best speaker here - they are built to different priorities, and the right one depends on your room, your amplifier and what you listen to.
| Area | Better | Why |
|---|
| Bass | A | ELAC Debut 2.0 B6.2 digs deeper - 44Hz against 52Hz. A subwoofer would even that out. |
| Amplifier needs | B | Klipsch RP-400M is more sensitive (93dB vs 87dB), so it goes louder on the same amplifier. |
| Amplifier match | B | Klipsch RP-400M is the easier load at 8 ohms. |
| Headroom | A | ELAC Debut 2.0 B6.2 takes more power (120W vs 50W) - more in hand in a big room. |
| Size | depends | Klipsch RP-400M is easier to place; ELAC Debut 2.0 B6.2 is bigger, which usually goes with fuller bass. Your room decides. |
| Expandability | depends | Neither adds bi-amping, a sub output or height drivers. Klipsch RP-400M sits in a wider range (17 models), so a matched surround system is easier later. |
| Price | evenly matched | Much the same money ($400 vs $399 a pair). |
A ELAC Debut 2.0 B6.2 B Klipsch RP-400M
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Neither runs away with it - they trade advantages. Let the "depends" rows and your own room settle it. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 52Hz anyway, so judge these on the other rows instead. Match it to your room: we rate ELAC Debut 2.0 B6.2 the better fit for a mid-size room and a large room, and Klipsch RP-400M for near-field listening and a small room.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.