In this review, we will be comparing BW 606 and Q150, two Passive Bookshelf speakers from Bowers Wilkins and KEF.
Let's have a brief look at the main features
of B&W 606 and KEF Q150 first before getting into our more
detailed comparison.
| Key Specs | B&W 606 | KEF Q150 |
|---|
| Brand | Bowers Wilkins
United Kingdom · founded 1966 | KEF
United Kingdom · founded 1961 |
|---|
| Design | 2-way | 2-way |
|---|
| Uni-Q driver | — | 11th Generation Uni-Q |
|---|
| Tweeter | 1" Hard-Dome | 1" Dome |
|---|
| Woofer | 6.5" Continuum | 5.25" Aluminum |
|---|
| Frequency response | 52-28k Hz | 51-28k Hz |
|---|
| Sensitivity | 88 dB | 86 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | 30-120 watts | 10-100 watts |
|---|
| Weight | 6.90kg / 15.2lbs | 5.60kg / 12.3lbs |
|---|
| Dimensions (H x W x D) | 13.6" x 7-1/2" x 12-13/16"
345.0 x 190.0 x 324.0mm | 11.9" x 7.0" x 10.9"
303.0 x 180.0 x 278.0mm |
|---|
What size room are the B&W 606 and KEF Q150 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
B&W 606 |
KEF Q150 |
| Near-field |
Poor |
Average |
| Small Room |
Average |
Good |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Poor |
| Very Large Room |
Poor |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both BW 606 and Q150 are 2-way speakers.
B&W 606KEF Q150
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
B&W 606 |
KEF Q150 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 5.25-inch
|
BW 606 features a 1" Decoupled Carbon Hard-Dome Tweeter and 1 x 6.5" Continuum Woofer. On the other hand, the Q150 features a 1" vented aluminum Dome Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2500Hz.
Frequency Response
BW 606 has a frequency range of 52-28k Hz whereas Q150 has a frequency range of 51-28k Hz. With a minimum frequency of 51Hz, the Q150 can go slightly deeper then the BW 606's min frequency of 52Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
BW 606 and Q150 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. BW 606 sensitivity is rated at 88 dB and the Q150's is at 86 dB. This 2 dB difference makes the B&W 606 a more sensitive speaker compared to KEF Q150, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
BW 606 can handle a max power of 120 watts RMS, whereas Q150 has a max power handling value of 100 watts RMS, 20 watts less than the BW 606.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
BW 606 features Post posts which make bi-amping or bi-wiring possible. Q150 has a Post which doesn't feature bi-amping/bi-wiring.
B&W 606's Post terminals allows Bi-amping or bi-wiring
KEF Q150's Post terminals
Cabinet Type and Port Position
Both BW 606 and Q150 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
KEF Q150 Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W 606's and KEF Q150's external dimensions. B&W 606 has external dimensions of 345.0 x 190.0 x 324.0mm (13.5 x 7.4 x 12.7inch) whereas KEF Q150 has external dimensions of 303.0 x 180.0 x 278.0mm (11.9 x 7.0 x 10.9inch).
B&W 606 is clearly the larger of the two speakers. Its body is 10mm wider, 42mm taller and 46mm deeper than KEF Q150.
Below you can see the front view size comparison of B&W 606 and KEF Q150 in scale.
Comparison image of B&W 606 and KEF Q150 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the B&W 606 is approximately 615.6cm2 / 95.4inch2 and base area of the KEF Q150 is approximately 500.4cm2 / 77.6inch2. The BW 606 requires 23% more surface area than the Q150 which gives it a small disadvantage on placement in tight spaces.
Here is another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of B&W 606 and KEF Q150 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The B&W 606 weighs 6.90kg / 15.2lbs and the KEF Q150 weighs 5.60kg / 12.3lbs. This makes the BW 606 23% heavier than the Q150.
Here is a comparison of how BW 606 and Q150's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of B&W 606?
Here are the items that are included inside the box of BW 606:
- 2 Bookshelf loudspeakers
- 2 Grilles
- 2 Two-piece foam port plugs
- 8 Self-adhesive rubber feet
- 4 Jumper-straps (pre-installed)
- Manual
- Bowers & Wilkins brochure
- Warranty Information
What's in the Box of KEF Q150?
Here are the items that come with the Q150:
- 2 Bookshelf loudspeakers
- 2 Foam port plugs
- 8 Self-adhesive rubber feet
- Owner's Manual
- Warranty Registration Card
 Max Input Power |
120 watts
vs
100 watts
|
Handle more power from your amplifier |
 Sensitivity |
88 dB
vs
86 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
|
Low Frequency Response |
51 Hz
vs
52 Hz
|
Generates deeper bass |
 Height |
303mm
vs
345mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
500cm2
vs
615cm2
|
Takes less floor space |
 Price per pair* |
600USD
vs
899USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Bowers & Wilkins 606 |
KEF Q150 |
| Brand |
Bowers Wilkins |
KEF |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
30-120 watts |
10-100 watts |
| Sensitivity |
88 dB |
86 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
3.7 ohms |
3.7 ohms |
| Frequency Response |
52-28k Hz |
51-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
5.25" |
| Woofer Composition |
Continuum |
Aluminum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Hard-Dome |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
2500Hz |
| Firing Direction |
rear |
rear |
| Suggested Break-in Period |
allow up to a week for the temperature effects to stabilise and 15 hours of average use for the parts to attain their intended design characteristics. |
n/a |
Physical Specs |
|
|
| Height |
345.0mm (13.6") |
303.0mm (11.9") |
| Width |
190.0mm (7.5") |
180.0mm (7.1") |
| Depth |
324.0mm (12.8") |
278.0mm (10.9") |
| Weight |
6.90kg (15.2lbs) |
5.60kg (12.3lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Vinyl |
MDF/Vinyl-wrapped |
| Available Colors |
Black, White, Oak |
Black, Walnut, White |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-26" |
18-24" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
No single best speaker here - they are built to different priorities, and the right one depends on your room, your amplifier and what you listen to.
| Area | Better | Why |
|---|
| Bass | evenly matched | Much the same reach (52Hz vs 51Hz). |
| Amplifier needs | A | B&W 606 is more sensitive (88dB vs 86dB), so it goes louder on the same amplifier. |
| Headroom | evenly matched | Similar power handling (120W vs 100W). |
| Size | depends | KEF Q150 is easier to place; B&W 606 is bigger, which usually goes with fuller bass. Your room decides. |
| Expandability | depends | B&W 606: bi-amping. KEF Q150 sits in a wider range (7 models), so a matched surround system is easier later. |
| Price | B | KEF Q150 is cheaper - $600 against $899, about 33% less. |
A B&W 606 B KEF Q150
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
B&W 606 is ahead, but only on 1 of the measured areas, and it costs about 50% more. That is a lot of money for a narrow margin on paper - KEF Q150 looks like the sensible buy unless something else about the B&W 606 appeals to you. Match it to your room: we rate B&W 606 the better fit for a mid-size room and a large room, and KEF Q150 for near-field listening and a small room. In a large or open-plan room, B&W 606 has the cabinet volume to fill it more easily; in a small room, near a wall or at desk distance, KEF Q150 is the easier speaker to get right.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.