In this review, we will be comparing SubSeries BP8 and PB-2000 Pro, two Powered Subwoofer speakers from PSB and SVS. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of PSB SubSeries BP8 and SVS PB-2000 Pro first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the PSB SubSeries BP8 and SVS PB-2000 Pro compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both PSB SubSeries BP8and SVS PB-2000 Pro have a single woofer setup however the PSB SubSeries BP8's woofer is 8-inch whereas the SVS PB-2000 Pro features a 12-inch woofer.
Frequency Response
SubSeries BP8 has a frequency range of 25-150 Hz whereas PB-2000 Pro has a frequency range of 16-290 Hz. With a minimum frequency of 16Hz, the PB-2000 Pro can go significantly deeper on the low side and provide stronger bass compared to the SubSeries BP8's min frequency of 25Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The PSB SubSeries BP8 has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the SVS PB-2000 Pro have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare PSB SubSeries BP8's and SVS PB-2000 Pro's external dimensions. PSB SubSeries BP8 has external dimensions of 355 x 330 x 330mm ( 14 x 13 x 13 inch) whereas SVS PB-2000 Pro has external dimensions of 534.0 x 442.0 x 609.0mm ( 21 x 17-3/8 x 23-15/16inch) .
SVS PB-2000 Pro is clearly the larger of the two speakers. Its body is 112mm wider, 179mm taller and 279mm deeper than PSB SubSeries BP8.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the PSB SubSeries BP8 is approximately 1089.0cm2 / 168.8inch2 and base area of the SVS PB-2000 Pro is approximately 2691.8cm2 / 417.2inch2. The SubSeries BP8 requires 60% less surface area than the PB-2000 Pro which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The PSB SubSeries BP8 weighs 19.10kg / 42lbs and the SVS PB-2000 Pro weighs 29.45kg / 64.8lbs. This makes the PB-2000 Pro 54% heavier than the SubSeries BP8.
Here is a comparison of how SubSeries BP8 and PB-2000 Pro's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of PSB SubSeries BP8?
Here are the items that are included inside the box of SubSeries BP8:
Powered subwooferDetachable grille8-feet Power cordOwners GuideSpecifications sheetWarranty Card
What's in the Box of SVS PB-2000 Pro?
Here are the items that come with the PB-2000 Pro:
Powered subwooferGrille8-feet AC power cordQuick Start GuideSafety InstructionsSVS brochure
 Height |
355mm
vs
534mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1089cm2
vs
2691cm2
|
Takes less floor space |
 Woofer Size |
12 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
16 Hz
vs
25 Hz
|
Generates deeper bass |
 High Frequency Response |
290k Hz
vs
150k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Price per pair* |
1100USD
vs
1499USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
PSB SubSeries BP8 |
SVS PB-2000 Pro |
| Brand |
PSB |
SVS |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
500 watts |
550 watts |
| Frequency Response |
25-150 Hz |
16-290 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
500-watt RMS |
550-watt RMS |
| Watts Peak (Max) |
n/a |
1500-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
12" |
| Woofer Composition |
Carbon Fibre |
Aluminum |
| Woofer Surround Material |
High Density Rubber |
n/a |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
355.0mm (14") |
534.0mm (21") |
| Width |
330.0mm (13") |
442.0mm (17.4") |
| Depth |
330.0mm (13") |
609.0mm (24") |
| Weight |
19.10kg (42lbs) |
29.45kg (64.8lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Available Colors |
Satin Black, Satin White |
n/a |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
1 Year |
5 Years |
| Labor Warranty |
1 Year |
5 Years |