In this review, we will be comparing CR8SBT and R-10SWi, two Powered Subwoofer speakers from Mackie and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Mackie CR8SBT and Klipsch R-10SWi first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Mackie CR8SBTand Klipsch R-10SWi have a single woofer setup however the Mackie CR8SBT's woofer is 8-inch whereas the Klipsch R-10SWi features a 10-inch woofer.
Frequency Response
CR8SBT has a frequency range of 37-400 Hz whereas R-10SWi has a frequency range of 32-120 Hz. With a minimum frequency of 32Hz, the R-10SWi can go significantly deeper on the low side and provide stronger bass compared to the CR8SBT's min frequency of 37Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Klipsch R-10SWi Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Mackie CR8SBT's and Klipsch R-10SWi's external dimensions. Mackie CR8SBT has external dimensions of 368.3 x 322.3 x 457.2mm () whereas Klipsch R-10SWi has external dimensions of 370.0 x 318.0 x 462.0mm (14-9/16 x 12-1/2 x 18-3/16inch).
Mackie CR8SBT is 1.7mm shorter and 4.8mm less deeper than Klipsch R-10SWi but it is also 4.3mm wider.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Near-identical footprints.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Mackie CR8SBT is approximately 1473.6cm2 / 228.4inch2 and base area of the Klipsch R-10SWi is approximately 1469.2cm2 / 227.7inch2. The CR8SBT requires 0% more surface area than the R-10SWi which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Mackie CR8SBT weighs 11.52kg / 25.3lbs and the Klipsch R-10SWi weighs 11.59kg / 25.5lbs. This makes the R-10SWi 1% heavier than the CR8SBT.
Here is a comparison of how CR8SBT and R-10SWi's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 High Frequency Response |
400 Hz
vs
120 Hz
|
Generates higher frequency |
 Height |
368mm
vs
370mm
|
Easier to fit in smaller spaces |
 Price per pair* |
200USD
vs
274USD
|
costs less (*prices may change depending on the seller, location and time) |
 Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
32 Hz
vs
37 Hz
|
Generates deeper bass |
 Base Surface Area |
1469cm2
vs
1473cm2
|
Takes less floor space |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Near-identical footprints.
| General |
Mackie CR8SBT |
Klipsch Reference R-10SWi |
| Brand |
Mackie |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
37-400 Hz |
32-120 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
100-watt RMS |
150-watt RMS |
| Watts Peak (Max) |
200-watt RMS |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
10" |
| Woofer Composition |
|
Copper IMG |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
368.3mm (14.5") |
370.0mm (14.6") |
| Width |
322.3mm (12.7") |
318.0mm (12.5") |
| Depth |
457.2mm (18") |
462.0mm (18.2") |
| Weight |
11.52kg (25.3lbs) |
11.59kg (25.5lbs) |
| Enclosure |
|
Bass Reflex |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
1 Year |
2 Years |
| Labor Warranty |
1 Year |
2 Years |
No single best subwoofer here. Your room, where the box can physically go, and whether this is mainly for films or mainly for music will settle it long before the specs do.
| Area | Better | Why |
|---|
| Bass depth | B | Klipsch R-10SWi goes deeper - 32Hz against 37Hz. A real difference, though most music has little content below 37Hz. |
| Amplifier power | B | Klipsch R-10SWi has the bigger amplifier - 150W against 100W RMS, about 1.8dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | B | Klipsch R-10SWi moves more air: 10" against 8" is 1.56x the cone area, not the 1.25x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are ported designs, so they roll off in much the same way. |
| Warranty | B | Klipsch R-10SWi carries 2 years on parts against 1 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | Mackie CR8SBT costs less - $200 against $274, about 27% less. |
A Mackie CR8SBT B Klipsch R-10SWi
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: Klipsch R-10SWi measures better, Mackie CR8SBT costs about 27% less. In a normal room, placement will make a bigger difference than the gap between these two.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.