In this review, we will be comparing R-10SWi and S 810 SUB, two Powered Subwoofer speakers from Klipsch and Jamo. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch R-10SWi and Jamo S 810 SUB first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch R-10SWi and Jamo S 810 SUB compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Klipsch R-10SWiand Jamo S 810 SUB have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
R-10SWi has a frequency range of 32-120 Hz whereas S 810 SUB has a frequency range of 36-180 Hz. With a minimum frequency of 32Hz, the R-10SWi can go slightly deeper then the S 810 SUB's min frequency of 36Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Klipsch R-10SWi and Jamo S 810 SUB have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Klipsch R-10SWi Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-10SWi's and Jamo S 810 SUB's external dimensions. Klipsch R-10SWi has external dimensions of 370.0 x 318.0 x 462.0mm ( 14-9/16 x 12-1/2 x 18-3/16inch) whereas Jamo S 810 SUB has external dimensions of 508.0 x 228.0 x 405.0mm ( 20 x 8-15/16 x 15-15/16inch) .
Jamo S 810 SUB is 90mm narrower and 57mm less deeper than Klipsch R-10SWi but it is also 138mm taller.
Below you can see the front view size comparison of Klipsch R-10SWi and Jamo S 810 SUB in scale.
Comparison image of Klipsch R-10SWi and Jamo S 810 SUB Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-10SWi is approximately 1469.2cm2 / 227.7inch2 and base area of the Jamo S 810 SUB is approximately 923.4cm2 / 143.1inch2. The R-10SWi requires 59% more surface area than the S 810 SUB which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch R-10SWi weighs 11.59kg / 25.5lbs and the Jamo S 810 SUB weighs 11.82kg / 26lbs. This makes the S 810 SUB 2% heavier than the R-10SWi.
Here is a comparison of how R-10SWi and S 810 SUB's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Klipsch R-10SWi?
Here are the items that are included inside the box of R-10SWi:
Powered subWireless transmitter (attached 12
What's in the Box of Jamo S 810 SUB?
Here are the items that come with the S 810 SUB:
Powered subwooferGrille5-feet AC power cord6.5-feet Mono-RCA cable4 Rubber feetUser ManualImportant Safety InstructionsWarranty Information
 Low Frequency Response |
32 Hz
vs
36 Hz
|
Generates deeper bass |
 Height |
370mm
vs
508mm
|
Easier to fit in smaller spaces |
 Wireless Operation |
Yes
vs
No
|
Connect your subwoofer to your system wireless |
 High Frequency Response |
180k Hz
vs
120k Hz
|
Generates higher frequency |
 Base Surface Area |
923cm2 (228x405mm)
vs
1469cm2 (318x462mm)
|
Takes less floor space |
 Price per pair* |
199USD
vs
274USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Klipsch Reference R-10SWi |
Jamo S 810 SUB |
| Brand |
Klipsch |
Jamo |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
150 watts |
75 watts |
| Frequency Response |
32-120 Hz |
36-180 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
150-watt RMS |
75-watt RMS |
| Watts Peak (Max) |
300-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Copper IMG |
Polyfiber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
rear |
Side |
Physical Specs |
|
|
| Height |
370.0mm (14.6") |
508.0mm (20") |
| Width |
318.0mm (12.5") |
228.0mm (9") |
| Depth |
462.0mm (18.2") |
405.0mm (15.9") |
| Weight |
11.59kg (25.5lbs) |
11.82kg (26lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
2 Years |
| Labor Warranty |
2 Years |
2 Years |