In this review, we will be comparing Varro PS250-BK and SB-2000, two Powered Subwoofer speakers from ELAC and SVS. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of ELAC Varro PS250-BK and SVS SB-2000 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the ELAC Varro PS250-BK and SVS SB-2000 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both ELAC Varro PS250-BKand SVS SB-2000 have a single woofer setup however the ELAC Varro PS250-BK's woofer is 10-inch whereas the SVS SB-2000 features a 12-inch woofer.
Frequency Response
Varro PS250-BK has a frequency range of 27-150 Hz whereas SB-2000 has a frequency range of 19-220 Hz. With a minimum frequency of 19Hz, the SB-2000 can go significantly deeper on the low side and provide stronger bass compared to the Varro PS250-BK's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The ELAC Varro PS250-BK has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the SVS SB-2000 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Varro PS250-BK's and SVS SB-2000's external dimensions. ELAC Varro PS250-BK has external dimensions of 381.0 x 361.0 x 361.0mm ( 15inch x 14-3/16inch x 14-3/16inch ) whereas SVS SB-2000 has external dimensions of 372.0 x 362.0 x 478.0mm ( 14-5/8 x 14-1/4 x 18-13/16inch) .
ELAC Varro PS250-BK is 1mm narrower and 117mm less deeper than SVS SB-2000 but it is also 9mm taller.
Below you can see the front view size comparison of ELAC Varro PS250-BK and SVS SB-2000 in scale.
Comparison image of ELAC Varro PS250-BK and SVS SB-2000 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Varro PS250-BK is approximately 1303.2cm2 / 202.0inch2 and base area of the SVS SB-2000 is approximately 1730.4cm2 / 268.2inch2. The Varro PS250-BK requires 25% less surface area than the SB-2000 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The ELAC Varro PS250-BK weighs 16.44kg / 36.2lbs and the SVS SB-2000 weighs 15.82kg / 34.8lbs. This makes the Varro PS250-BK 4% heavier than the SB-2000.
Here is a comparison of how Varro PS250-BK and SB-2000's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of ELAC Varro PS250-BK?
Here are the items that are included inside the box of Varro PS250-BK:
Grill Power Cord 4 Spikes
What's in the Box of SVS SB-2000?
Here are the items that come with the SB-2000:
Powered subwooferGrille8-feet AC power cordOwners ManualQuick Start Guide
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Base Surface Area |
1303cm2 (361x361mm)
vs
1730cm2 (362x478mm)
|
Takes less floor space |
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
19 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
220k Hz
vs
150k Hz
|
Generates higher frequency |
 Height |
372mm
vs
381mm
|
Easier to fit in smaller spaces |
 Price per pair* |
600USD
vs
649USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
ELAC Varro PS250-BK |
SVS SB-2000 |
| Brand |
ELAC |
SVS |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
250 watts |
500 watts |
| Frequency Response |
27-150 Hz |
19-220 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
250-watt RMS |
500-watt RMS |
| Watts Peak (Max) |
500-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
12" |
| Woofer Composition |
Treated paper |
Aluminum |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
50-160 Hz and 80 Hz |
| Firing Direction |
bottom |
front |
Physical Specs |
|
|
| Height |
381.0mm (15") |
372.0mm (14.6") |
| Width |
361.0mm (14.2") |
362.0mm (14.3") |
| Depth |
361.0mm (14.2") |
478.0mm (18.8") |
| Weight |
16.44kg (36.2lbs) |
15.82kg (34.8lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Finish |
MDF |
n/a |
| Available Colors |
Black |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| USB Port |
USB-A port for firmware updates |
n/a |
Other |
|
|
| Parts Warranty |
1 year |
5 Years |
| Labor Warranty |
1 year |
5 Years |