In this review, we will be comparing RP-6203F and Bronze 500, two Passive Floor-standing speakers from Klipsch and Monitor Audio.
Let's have a brief look at the main features
of Klipsch RP-6203F and Monitor Audio Bronze 500 first before getting into our more
detailed comparison.
| Key Specs | Klipsch RP-6203F | Monitor Audio Bronze 500 |
|---|
| Brand | Klipsch
United States · founded 1946 | Monitor Audio
United Kingdom · founded 1972 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1" Tractrix Horn | 1" gold dome C-CAM with uniform dispersion (UD) waveguide |
|---|
| Woofer | 2 x 6.5" Cerametallic | 2 x 8" C-CAM |
|---|
| Frequency response | 38-25k Hz | 32-30k Hz |
|---|
| Sensitivity | 96 dB | 90 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | up to 125 watts | 60-200 watts |
|---|
| Weight | — | 18.05kg / 39.7lbs |
|---|
| Dimensions (H x W x D) | 39-5/8" x 9-5/16" x 17-9/16"
1006.0 x 236.0 x 446.0mm | 38-7/16" x 11-9/16" x 14-3/8"
977.0 x 294.0 x 366.0mm |
|---|
What size room are the Klipsch RP-6203F and Monitor Audio Bronze 500 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Klipsch RP-6203F |
Monitor Audio Bronze 500 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-6203F and Bronze 500 are 2-way speakers.
Klipsch RP-6203FMonitor Audio Bronze 500
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Klipsch RP-6203F |
Monitor Audio Bronze 500 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6.5-inch
|
2 x 8-inch
|
RP-6203F features a 1" titanium Tractrix Horn Tweeter and 2 x 6.5" Cerametallic Woofer with a Crossover frequency at 1770 Hz. On the other hand, the Bronze 500 features a 1" gold dome C-CAM with uniform dispersion (UD) waveguide Tweeter and 2 x 8" C-CAM Woofer.
Frequency Response
RP-6203F has a frequency range of 38-25k Hz whereas Bronze 500 has a frequency range of 32-30k Hz. With a minimum frequency of 32Hz, the Bronze 500 can go significantly deeper on the low side and provide stronger bass compared to the RP-6203F's min frequency of 38Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-6203F and Bronze 500 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-6203F sensitivity is rated at 96 dB and the Bronze 500's is at 90 dB. This 6 dB difference makes the Klipsch RP-6203F a more sensitive speaker compared to Monitor Audio Bronze 500, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Bronze 500 can handle a max power of 200 watts RMS, whereas RP-6203F has a max power handling value of 125 watts RMS, 75 watts less than the Bronze 500.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Both RP-6203F and Bronze 500 features dual binding post speaker terminals for bi-amping or bi-wiring.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-6203F's and Monitor Audio Bronze 500's external dimensions. Klipsch RP-6203F has external dimensions of 1006.0 x 236.0 x 446.0mm (39-5/8 x 9-5/16 x 17-9/16inch) whereas Monitor Audio Bronze 500 has external dimensions of 977.0 x 294.0 x 366.0mm (38-7/16 x 11-9/16 x 14-3/8inch).
Monitor Audio Bronze 500 is 29mm shorter and 80mm less deeper than Klipsch RP-6203F but it is also 58mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-6203F is approximately 1052.6cm2 / 163.2inch2 and base area of the Monitor Audio Bronze 500 is approximately 1076.0cm2 / 166.8inch2. The RP-6203F requires 2% less surface area than the Bronze 500 which gives it a small advantage on placement in tight spaces.
What's in the Box of Monitor Audio Bronze 500?
Here are the items that come with the Bronze 500:
- Floorstanding loudspeaker
- Grille
- 4 Outrigger feet (w/ 4 adjustment dials and locking-nuts)
- 4 Spikes (pre-installed on outrigger feet)
- 4 Rubber feet
- 4 Large course-thread screws
- 4 Small machine screws
- 2 Terminal-jumpers (pre-installed)
- 2 Foam port plugs
- Hex-key
- Quick Start Guide
- Important Safety Instructions