In this review, we will be comparing RP-8203F and Prime Tower, two Passive Floor-standing speakers from Klipsch and SVS.
Let's have a brief look at the main features
of Klipsch RP-8203F and SVS Prime Tower first before getting into our more
detailed comparison.
| Key Specs | Klipsch RP-8203F | SVS Prime Tower |
|---|
| Brand | Klipsch
United States · founded 1946 | SVS
United States · founded 1998 |
|---|
| Design | 2-way | 3-way |
|---|
| Tweeter | 1" Tractrix Horn | 1" dome |
|---|
| Midrange | — | 4.5" |
|---|
| Woofer | 2 x 8" Cerametallic | 2 x 6.5" Polypropylene |
|---|
| Frequency response | 35-25k Hz | 30-25k Hz |
|---|
| Sensitivity | 98 dB | 87 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | up to 150 watts | 20-250 watts |
|---|
| Weight | — | 18.23kg / 40.1lbs |
|---|
| Dimensions (H x W x D) | 43-1/8" x 10-13/16" x 18-1/4"
1095.0 x 275.0 x 463.0mm | 36-5/8" x 8" x 11-11/16"
931.0 x 204.0 x 297.0mm |
|---|
What size room are the Klipsch RP-8203F and SVS Prime Tower speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Klipsch RP-8203F |
SVS Prime Tower |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Poor |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that RP-8203F is a 2-way design whereas the Prime Tower is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Klipsch RP-8203FSVS Prime Tower
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Klipsch RP-8203F |
SVS Prime Tower |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 4.5-inch |
|
Woofer
|
2 x 8-inch
|
2 x 6.5-inch
|
RP-8203F features a 1" titanium Tractrix Horn Tweeter and 2 x 8" Cerametallic Woofer with a Crossover frequency at 1630 Hz. On the other hand, the Prime Tower features a 1" aluminum dome Tweeter, a 4.5" Midrange and 2 x 6.5" Polypropylene Woofer with a Crossover frequency at 350Hz and 2100Hz.
Frequency Response
RP-8203F has a frequency range of 35-25k Hz whereas Prime Tower has a frequency range of 30-25k Hz. With a minimum frequency of 30Hz, the Prime Tower can go significantly deeper on the low side and provide stronger bass compared to the RP-8203F's min frequency of 35Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-8203F and Prime Tower have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-8203F sensitivity is rated at 98 dB and the Prime Tower's is at 87 dB. This 11 dB difference makes the Klipsch RP-8203F a more sensitive speaker compared to SVS Prime Tower, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Prime Tower can handle a max power of 250 watts RMS, whereas RP-8203F has a max power handling value of 150 watts RMS, 100 watts less than the Prime Tower.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
RP-8203F features Binding post posts which make bi-amping or bi-wiring possible. Prime Tower has a 5-Way post which doesn't feature bi-amping/bi-wiring.
SVS Prime Tower's 5-Way post terminals
Cabinet Type and Port Position
Both RP-8203F and Prime Tower have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-8203F's and SVS Prime Tower's external dimensions. Klipsch RP-8203F has external dimensions of 1095.0 x 275.0 x 463.0mm (43-1/8 x 10-13/16 x 18-1/4inch) whereas SVS Prime Tower has external dimensions of 931.0 x 204.0 x 297.0mm (36-5/8 x 8 x 11-11/16inch).
Klipsch RP-8203F is clearly the larger of the two speakers. Its body is 71mm wider, 164mm taller and 166mm deeper than SVS Prime Tower.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-8203F is approximately 1273.3cm2 / 197.4inch2 and base area of the SVS Prime Tower is approximately 605.9cm2 / 93.9inch2. The RP-8203F requires 110% more surface area than the Prime Tower which gives it a small disadvantage on placement in tight spaces.
What's in the Box of SVS Prime Tower?
Here are the items that come with the Prime Tower:
- Floorstanding loudspeaker
- Grille (pre-installed)
- 4 Elastomer isolation feet (pre-installed)
- 4 Spike feet
- 4 Nuts
- 4 Protective discs
- Owners Manual
- SVS brochure
- Online Product Registration Card