Spendor D7.2 is a 3-way Passive Bass Reflex Floor-standing speaker by Spendor. It was released in 2022. It features a 0.87" Tweeter and 1 x 7.09" Woofer.
2.5 way rear-ported. LF 2 x 7" (180 mm). HF 0.866" (22 mm).
The speaker has a frequency range of 29-25k Hz and a sensitivity of 90 dB. Spendor D7.2 has an MSRP of 8998$ per pair.
Room Size Suitability
The size of the room where you plan to use the Spendor D7.2 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Poor |
| Small Room | Average |
| Mid-size Room | Good |
| Large Room | Average |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Spendor D7.2 Speaker
Spendor D7.2 has a Frequency response range of 29-25k Hz at ±3dB. With a minimum frequency of 29 Hz, D7.2 delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how D7.2's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the Spendor D7.2?
Among the speakers in our database with a max MSRP price of 10000$ (Pair), these are the 5 Passive Floor-standing speakers that have the deeper bass levels than the Spendor D7.2's 29Hz:
Crossover frequency of the Spendor D7.2?
The crossover points of the D7.2 are set at 900 Hz, 3.2 kHz.
Impedance and Sensitivity
Spendor D7.2's nominal impedance level is
8 ohms and has a sensitivity of
90 dB.
Sensitivity
Floor-standing Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Spendor D7.2 is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
90dB of the Spendor D7.2 is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the Spendor D7.2 plays in your room →
What amplifier does the Spendor D7.2 need?
At normal listening levels in a medium room, about
7.5–120 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? See every integrated amplifier we cover.
Input Type
D7.2 features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Spendor D7.2 External Dimensions and Weight
Spendor D7.2 has external dimensions of (Height x Width x Depth) 38.6 x 7.5 x 13.1inch (980.4 x 190.5 x 332.7mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Spendor D7.2 is approximately 633.8cm2 / 98.2inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Spendor D7.2 weighs 21.00kg / 46.2lbs per piece. Here is a comparison of how D7.2's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $10000
Cabinet type and Materials
Spendor D7.2 has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the Spendor D7.2 come with a Grille?
D7.2 comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Spendor D7.2.
Official Product Page
Official manufacturer's product page for the Spendor D7.2 speaker can be found below:
Official Product Page for Spendor D7.2