Spendor A2.2 is a 2-way Passive Bass Reflex Floor-standing speaker by Spendor. It was released in 2022. It features a 0.87" Tweeter and 1 x 5.91" Woofer.
Two-way rear-ported asymmetric cabinet. LF 15 cm EP77 polymer cone. HF 22 mm polyamide dome.
The speaker has a frequency range of 46-26k Hz and a sensitivity of 83 dB. Spendor A2.2 has an MSRP of 3198$ per pair.
Room Size Suitability
The size of the room where you plan to use the Spendor A2.2 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Poor |
| Small Room | Average |
| Mid-size Room | Good |
| Large Room | Average |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Spendor A2.2 Speaker
Spendor A2.2 has a Frequency response range of 46-26k Hz at ±3dB. With a minimum frequency of 46 Hz, A2.2 delivers moderate bass depth so depending on your use case, you might want to consider adding a subwoofer to your system.
Here we have a comparison of how A2.2's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the Spendor A2.2?
Among the speakers in our database with a max MSRP price of 5000$ (Pair), these are the 5 Passive Floor-standing speakers that have the deeper bass levels than the Spendor A2.2's 46Hz:
Crossover frequency of the Spendor A2.2?
The crossover frequency of the A2.2 is set to 4.2 kHz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Spendor A2.2's nominal impedance level is
8 ohms but can go down to as low as
6.4 ohms, and has a sensitivity of
83 dB.
Sensitivity
Floor-standing Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Spendor A2.2 is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
With a sensitivity level of only 83 dB, Spendor A2.2 is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps. Work out how loud the Spendor A2.2 plays in your room →
Minimum Impedance of the Spendor A2.2
Even though the nominal impedance of the A2.2 is 8 ohms, the minimum impedance level of this speaker according to Spendor is 6.4 ohms Spendor A2.2 so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
What amplifier does the Spendor A2.2 need?
At normal listening levels in a medium room, about
38–595 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $5,000, or every amplifier we cover.
Input Type
A2.2 features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Spendor A2.2 External Dimensions and Weight
Spendor A2.2 has external dimensions of (Height x Width x Depth) 30.94 x 5.91 x 10.16inch (785.9 x 150.1 x 258.1mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Spendor A2.2 is approximately 387.4cm2 / 60.0inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Spendor A2.2 weighs 11.40kg / 25.1lbs per piece. Here is a comparison of how A2.2's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $5000
Cabinet type and Materials
Spendor A2.2 has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the Spendor A2.2 come with a Grille?
A2.2 comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Spendor A2.2.
Official Product Page
Official manufacturer's product page for the Spendor A2.2 speaker can be found below:
Official Product Page for Spendor A2.2