In this review, we will be comparing two different type of speakers by ELAC. ELAC Concentro M 807 is a Floor-standing speaker whereas the CCS501.2 is a Center Channel speaker.
Let's have a brief look at the main features
of ELAC Concentro M807 and ELAC Concentro Center 501.2 first before getting into our more
detailed comparison.
ELAC Concentro M807 Key Specs
- 4-way Design
- " JET 6c AMT Tweeter
- 4.5" Midrange
- 2 x 10" Aluminium sandwich (AS) Woofer
- 24-50k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:80-600watts
- Weight:62.00kg
- Dimensions (H x W x D): 52-3/4" x 18-1/8" x 23-7/16" ( 1340.0 x 461.0 x 595.0mm )
ELAC Concentro Center 501.2 Key Specs
- 4-way Design
- " JET 6 AMT Tweeter
- 5" Midrange
- 2 x 7" AS-XR aluminium sandwich Woofer
- 5" Midrange
- 26-50k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:60-500watts
- Dimensions (H x W x D): 8-11/16" x 35-1/16" x 12" ( 220.0 x 890.0 x 305.0mm )
M807 and CCS501.2 are members of ELAC's Concentro 2.0 series of speakers. Below you can find the loudspeakers from this series.
ELAC Concentro 2.0 Series
History
What size room are the ELAC Concentro M807 and ELAC Concentro Center 501.2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
ELAC Concentro M807 |
ELAC Concentro Center 501.2 |
| Near-field |
Are you nuts? |
Poor |
| Small Room |
Poor |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Good |
Average |
| Very Large Room |
Good |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the ELAC Concentro M807 and ELAC Concentro Center 501.2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both M807 and CCS501.2 are 4-way speakers.
| Driver |
ELAC Concentro M807 |
ELAC Concentro Center 501.2 |
|
Driver Setup
|
4-way
|
4-way
|
|
Tweeter
|
-inch
|
-inch
|
|
Midrange
|
2 x 4.5-inch |
1 x 5-inch |
|
Woofer
|
2 x 10-inch
|
2 x 7-inch
|
M807 features a " Folded ribbon foil JET 6c AMT Tweeter , a 4.5" Midrange and 2 x 10" Aluminium sandwich (AS) Woofer with a Crossover frequency at 150/650/2650Hz. On the other hand, the CCS501.2 features a " Folded ribbon foil JET 6 AMT Tweeter , a 5" Midrange and 2 x 7" AS-XR aluminium sandwich Woofer with a Crossover frequency at 120/400/2600Hz.
Frequency Response
M807 has a frequency range of 24-50k Hz whereas CCS501.2 has a frequency range of 26-50k Hz. With a minimum frequency of 24Hz, the M807 can go slightly deeper then the CCS501.2's min frequency of 26Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
ELAC Concentro Center 501.2
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
M807 and CCS501.2 have the same Impedance of 4 ohms and their sensitivity is also same at 88 dB.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the M807 and the M807 can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
M807 can handle a max power of 400 watts RMS from the amp the whereas CCS501.2 has a max power handling value of 300 watts RMS, 100 watts less than the M807.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both M807 and CCS501.2 features dual binding post speaker terminals for bi-amping or bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Concentro M807's and ELAC Concentro Center 501.2's external dimensions. ELAC Concentro M807 has external dimensions of 1340.0 x 461.0 x 595.0mm ( 52-3/4 x 18-1/8 x 23-7/16inch) whereas ELAC Concentro Center 501.2 has external dimensions of 220.0 x 890.0 x 305.0mm ( 8-11/16 x 35-1/16 x 12inch) .
ELAC Concentro Center 501.2 is 1120mm shorter and 290mm less deeper than ELAC Concentro M807 but it is also 429mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Concentro M807 is approximately 2743.0cm2 / 425.2inch2 and base area of the ELAC Concentro Center 501.2 is approximately 2714.5cm2 / 420.7inch2. The M807 requires 1% more surface area than the CCS501.2 which gives it a small disadvantage on placement in tight spaces.