In this review, we will be comparing two different type of speakers by ELAC. ELAC Debut 3.0 DA43 is a Surround speaker whereas the Debut 3.0 DB63 is a Bookshelf speaker.
Let's have a brief look at the main features
of ELAC Debut 3.0 DA43 and ELAC Debut 3.0 DB63 first before getting into our more
detailed comparison.
ELAC Debut 3.0 DA43 Key Specs
- 2-way Design
- 1" Hard-Dome Tweeter
- 4" Aramid fiber Woofer
- 73 to 38K Hz Frequency Response
- 84 dB Sensitivity
- Impedance: 6ohms
- Power Range:20 - 80watts
- Weight:3.32kg
- Dimensions (H x W x D): 6.7" x 6.8" x 9.7" ( 171.0 x 173.0 x 247.0mm )
ELAC Debut 3.0 DB63 Key Specs
- 2-way Design
- 1" Hard-Dome Tweeter
- 6.5" Aramid fiber Woofer
- 42 to 38K Hz Frequency Response
- 87 dB Sensitivity
- Impedance: 6ohms
- Power Range:20 - 140watts
- Weight:7.86kg
- Dimensions (H x W x D): 13-3/8" x 7-3/4" x 12-1/4" ( 340.0 x 197.0 x 312.0mm )
Debut 3.0 DA43 and Debut 3.0 DB63 are members of ELAC's Debut 3.0 series of speakers. Below you can find the loudspeakers from this series.
ELAC Debut 3.0 Series
History
What size room are the ELAC Debut 3.0 DA43 and ELAC Debut 3.0 DB63 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
ELAC Debut 3.0 DA43 |
ELAC Debut 3.0 DB63 |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the ELAC Debut 3.0 DA43 and ELAC Debut 3.0 DB63 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Debut 3.0 DA43 and Debut 3.0 DB63 are 2-way speakers.
| Driver |
ELAC Debut 3.0 DA43 |
ELAC Debut 3.0 DB63 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 4-inch
|
1 x 6.5-inch
|
Debut 3.0 DA43 features a 1" Hard-Dome Tweeter and 1 x 4" Aramid fiber Woofer with a Crossover frequency at 2400Hz. On the other hand, the Debut 3.0 DB63 features a 1" Hard-Dome Tweeter and 1 x 6.5" Aramid fiber Woofer with a Crossover frequency at 2000Hz.
Frequency Response
Debut 3.0 DA43 has a frequency range of 73 to 38K Hz whereas Debut 3.0 DB63 has a frequency range of 42 to 38K Hz. With a minimum frequency of 42Hz, the Debut 3.0 DB63 can go significantly deeper on the low side and provide stronger bass compared to the Debut 3.0 DA43's min frequency of 73Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Surround class in our database.
Low Frequency
Surround Speakers
High Frequency
Surround Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Debut 3.0 DA43 and Debut 3.0 DB63 have the same Impedance of 6 ohms but where they differ is the sensitivity levels. Debut 3.0 DA43 sensitivity is rated at 84 dB and the Debut 3.0 DB63's is at 87 dB. This 3 dB difference makes the ELAC Debut 3.0 DB63 a more sensitive speaker compared to ELAC Debut 3.0 DA43, hence will play louder with the same amount of watts.
Sensitivity
Surround Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Debut 3.0 DA43 can handle a max power of 140 watts RMS from the amp the whereas Debut 3.0 DA43 has a max power handling value of 80 watts RMS , 60 watts less than the Debut 3.0 DB63.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Debut 3.0 DA43 features 5-Way post type posts and Debut 3.0 DB63 has a 5-Way post type posts. None of these speakers feature bi-amping/bi-wiring.
ELAC Debut 3.0 DB63's 5-Way post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut 3.0 DA43's and ELAC Debut 3.0 DB63's external dimensions. ELAC Debut 3.0 DA43 has external dimensions of 171.0 x 173.0 x 247.0mm ( 6.7-inch x 6.8-inch x 9.7-inch) whereas ELAC Debut 3.0 DB63 has external dimensions of 340.0 x 197.0 x 312.0mm ( 13-3/8-inch x 7-3/4-inch x 12-1/4-inch) .
ELAC Debut 3.0 DB63 is clearly the larger of the two speakers. Its body is 24mm wider, 169mm taller and 65mm deeper than ELAC Debut 3.0 DA43.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Debut 3.0 DA43 is approximately 427.3cm2 / 66.2inch2 and base area of the ELAC Debut 3.0 DB63 is approximately 614.6cm2 / 95.3inch2. The Debut 3.0 DA43 requires 30% less surface area than the Debut 3.0 DB63 which gives it a small advantage on placement in tight spaces.