In this review, we will be comparing Subsonic and KC62, two Powered Subwoofer speakers from Wilson Audio and KEF. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Wilson Audio Subsonic and KEF KC62 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Wilson Audio Subsonic and KEF KC62 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Wilson Audio Subsonic and KEF KC62 have a totally different setup: the Wilson Audio Subsonic features 3 x 12-inch drivers whereas the KC62 features 2 x 6.5-inch drivers.
Frequency Response
Subsonic has a frequency range of 10-150 Hz whereas KC62 has a frequency range of 11-200 Hz. With a minimum frequency of 10Hz, the Subsonic can go slightly deeper then the KC62's min frequency of 11Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Wilson Audio Subsonic has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the KEF KC62 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wilson Audio Subsonic's and KEF KC62's external dimensions. Wilson Audio Subsonic has external dimensions of 1653.0 x 459.0 x 691.0mm ( 65-1/16 x 18-1/16 x 27-3/16inch) whereas KEF KC62 has external dimensions of 245.0 x 258.0 x 281.0mm ( 9-5/8inch x 10-1/8inch x 11-1/16inch ) .
Wilson Audio Subsonic is clearly the larger of the two speakers. Its body is 201mm wider, 1408mm taller and 410mm deeper than KEF KC62.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wilson Audio Subsonic is approximately 3171.7cm2 / 491.6inch2 and base area of the KEF KC62 is approximately 725.0cm2 / 112.4inch2. The Subsonic requires 337% more surface area than the KC62 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Wilson Audio Subsonic weighs 229.00kg / 503.8lbs and the KEF KC62 weighs 14.05kg / 30.9lbs. This makes the Subsonic 1,530% heavier than the KC62.
Here is a comparison of how Subsonic and KC62's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
6.5 inches
|
Larger woofer |
| Number of Woofers |
3
vs
2
|
More woofers |
| Low Frequency Response |
10 Hz
vs
11 Hz
|
Generates deeper bass |
 High Frequency Response |
200k Hz
vs
150k Hz
|
Generates higher frequency |
 Height |
245mm
vs
1653mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
725cm2
vs
3171cm2
|
Takes less floor space |
 Price per pair* |
1500USD
vs
47250USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Wilson Audio Subsonic |
KEF KC62 |
| Brand |
Wilson Audio |
KEF |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Sensitivity |
87 dB |
n/a |
| Impedance |
4 ohms |
n/a |
| Frequency Response |
10-150 Hz |
11-200 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
n/a |
1000-watt RMS |
Drivers |
|
|
| Woofer Quantity |
3 |
2 |
| Woofer Size |
12" |
6.5" |
| Woofer Composition |
Paper pulp |
|
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
rear |
side |
Physical Specs |
|
|
| Height |
1653.0mm (65.1") |
245.0mm (9.6") |
| Width |
459.0mm (18.1") |
258.0mm (10.2") |
| Depth |
691.0mm (27.2") |
281.0mm (11.1") |
| Weight |
229.00kg (503.8lbs) |
14.05kg (30.9lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
n/a |
Other |
|
|
| Parts Warranty |
5 Years |
2 Years |
| Labor Warranty |
5 Years |
2 Years |