In this review, we will be comparing WH D10 and RP-1000SW, two Powered Subwoofer speakers from Wharfedale and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Wharfedale WH-D10 and Klipsch RP-1000SW first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Wharfedale WH-D10 and Klipsch RP-1000SW compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Wharfedale WH-D10and Klipsch RP-1000SW have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
WH D10 has a frequency range of 35-150 Hz whereas RP-1000SW has a frequency range of 19-131 Hz. With a minimum frequency of 19Hz, the RP-1000SW can go significantly deeper on the low side and provide stronger bass compared to the WH D10's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Wharfedale WH-D10 has a Infinite Baffle type cabinet. On the other hand the Klipsch RP-1000SW have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale WH-D10's and Klipsch RP-1000SW's external dimensions. Wharfedale WH-D10 has external dimensions of 393.0 x 333.0 x 394.0mm ( 15-1/2 x 13-1/8 x 15-1/2inch) whereas Klipsch RP-1000SW has external dimensions of 423.0 x 381.0 x 635.0mm ( 16-5/8inch x 15inch x 25inch ) .
Klipsch RP-1000SW is clearly the larger of the two speakers. Its body is 48mm wider, 30mm taller and 241mm deeper than Wharfedale WH-D10.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale WH-D10 is approximately 1312.0cm2 / 203.4inch2 and base area of the Klipsch RP-1000SW is approximately 2419.4cm2 / 375.0inch2. The WH D10 requires 46% less surface area than the RP-1000SW which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Wharfedale WH-D10 weighs 14.00kg / 30.8lbs and the Klipsch RP-1000SW weighs 25.77kg / 56.7lbs. This makes the RP-1000SW 84% heavier than the WH D10.
Here is a comparison of how WH D10 and RP-1000SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 High Frequency Response |
150k Hz
vs
131k Hz
|
Generates higher frequency |
 Height |
393mm
vs
423mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1312cm2
vs
2419cm2
|
Takes less floor space |
 Price per pair* |
699USD
vs
749USD
|
costs less (*prices may change depending on the seller, location and time) |
 Low Frequency Response |
19 Hz
vs
35 Hz
|
Generates deeper bass |
| General |
Wharfedale WH-D10 |
Klipsch Reference Premiere RP-1000SW |
| Brand |
Wharfedale |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
150 watts |
300 watts |
| Frequency Response |
35-150 Hz |
19-131 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
150-watt RMS |
300-watt RMS |
| Watts Peak (Max) |
300-watt RMS |
600-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Paper composite |
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
393.0mm (15.5") |
423.0mm (16.7") |
| Width |
333.0mm (13.1") |
381.0mm (15") |
| Depth |
394.0mm (15.5") |
635.0mm (25") |
| Weight |
14.00kg (30.8lbs) |
25.77kg (56.7lbs) |
| Enclosure |
Infinite Baffle |
Bass Reflex |
| Finish |
n/a |
MDF with Vinyl |
| Available Colors |
n/a |
Ebony |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
5 years |
| Labor Warranty |
5 Years |
5 years |