In this review, we will be comparing W253L and 65 RT, two Passive In-wall speakers from Revel and Polk Audio.
Let's have a brief look at the main features
of Revel W253L and Polk Audio 65 RT first before getting into our more
detailed comparison.
Revel W253L Key Specs
- 2-way Design
- 1" Hard-Dome Tweeter
- 2 x 5.25" Aluminum Woofer
- 55-18kHz Frequency Response
- 91 dB Sensitivity
- Impedance: 8ohms
- Power Range:10-130watts
- Dimensions (H x W x D): 359.0" x 6.4375" x 3.4375"( 359.0 x 164.0 x 88.0mm )
Polk Audio 65 RT Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 6.5" Polymer Composite Woofer
- 50-25kHz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:10-125watts
- Dimensions (H x W x D): 324.0" x 7.2500" x 0.0000"
What size room are the Revel W253L and Polk Audio 65 RT speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Revel W253L |
Polk Audio 65 RT |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Revel W253L and Polk Audio 65 RT compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both W253L and 65 RT are 2-way speakers.
| Driver |
Revel W253L |
Polk Audio 65 RT |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5.25-inch
|
1 x 6.5-inch
|
W253L features a 1" Hard-Dome Tweeter and 2 x 5.25" Aluminum Woofer . On the other hand, the 65 RT features a 1" Soft-Dome Tweeter and 1 x 6.5" Polymer Composite Woofer .
Frequency Response
W253L has a frequency range of 55-18kHz whereas 65 RT has a frequency range of 50-25kHz. With a minimum frequency of 50Hz, the 65 RT can go significantly deeper on the low side and provide stronger bass compared to the W253L's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the In-wall class in our database.
Low Frequency
In-wall Speakers
High Frequency
In-wall Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
W253L and 65 RT have the same Impedance of 8 ohms but where they differ is the sensitivity levels. W253L sensitivity is rated at 91 dB and the 65 RT's is at 90 dB. This 1 dB difference makes the Revel W253L a more sensitive speaker compared to Polk Audio 65 RT, hence will play louder with the same amount of watts.
Sensitivity
In-wall Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
W253L can handle a max power of 130 watts RMS from the amp the whereas 65 RT has a max power handling value of 125 watts RMS, 5 watts less than the W253L.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
W253L features Spring post type posts and 65 RT has a Spring post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Revel W253L's and Polk Audio 65 RT's external dimensions. Revel W253L has external dimensions of 359.0 x 164.0 x 88.0mm ( 14.1250-inch x 6.4375-inch x 3.4375-inch) whereas Polk Audio 65 RT has external dimensions of ( 12.7500-inch x 7.2500-inch x 0.0000-inch) .
Polk Audio 65 RT is 35mm shorter and 88mm less deeper than Revel W253L but it is also 21mm wider.
What's in the Box of Revel W253L?
Here are the items that are included inside the box of W253L:
In-wall loudspeakerGrilleScrim clothCutout templateInstruction Manual
What's in the Box of Polk Audio 65 RT?
Here are the items that come with the 65 RT:
Rectangular in-wall speakerFoam rubber port plugWhite metal grilleMounting templateOwners ManualSheer-Grille Painting instructionsOnline Registration CardPolk Audio product brochure