In this review, we will be comparing 607 S2 AE and Bronze 50, two Passive Bookshelf speakers from Bowers Wilkins and Monitor Audio. Let's have a brief look at the main features
of B&W 607 S2 and Monitor Audio Bronze 50 first before getting into our more
detailed comparison.
What size room are the B&W 607 S2 and Monitor Audio Bronze 50 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the B&W 607 S2 and Monitor Audio Bronze 50 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both 607 S2 AE and Bronze 50 are 2-way speakers.
| Driver |
B&W 607 S2 |
Monitor Audio Bronze 50 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5-inch
|
1 x 5.25-inch
|
607 S2 AE features a 1" Aluminum Decoupled Double Dome Tweeter and 1 x 5" Continuum Woofer . On the other hand, the Bronze 50 features a 1" Hard-Dome Tweeter and 1 x 5.25" C-CAM Woofer with a Crossover frequency at 2500Hz.
Frequency Response
607 S2 AE has a frequency range of 52-28k Hz whereas Bronze 50 has a frequency range of 40-30k Hz. With a minimum frequency of 40Hz, the Bronze 50 can go significantly deeper on the low side and provide stronger bass compared to the 607 S2 AE's min frequency of 52Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
607 S2 AE and Bronze 50 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. 607 S2 AE sensitivity is rated at 84 dB and the Bronze 50's is at 85 dB. This 1 dB difference makes the Monitor Audio Bronze 50 a more sensitive speaker compared to B&W 607 S2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
607 S2 AE can handle a max power of 100 watts RMS from the amp the whereas Bronze 50 has a max power handling value of 80 watts RMS, 20 watts less than the 607 S2 AE.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both 607 S2 AE and Bronze 50 features dual binding post speaker terminals for bi-amping or bi-wiring.
B&W 607 S2's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both 607 S2 AE and Bronze 50 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W 607 S2's and Monitor Audio Bronze 50's external dimensions. B&W 607 S2 has external dimensions of 301.0 x 166.0 x 232.0mm ( 11-13/16 x 6-1/2 x 9-1/8inch) whereas Monitor Audio Bronze 50 has external dimensions of 281.0 x 166.0 x 265.0mm ( 11.0 x 6.5 x 10.4inch) .
Below you can see the front view size comparison of B&W 607 S2 and Monitor Audio Bronze 50 in scale.
Comparison image of B&W 607 S2 and Monitor Audio Bronze 50 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the B&W 607 S2 is approximately 385.1cm2 / 59.7inch2 and base area of the Monitor Audio Bronze 50 is approximately 439.9cm2 / 68.2inch2. The 607 S2 AE requires 12% less surface area than the Bronze 50 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of B&W 607 S2 and Monitor Audio Bronze 50 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The B&W 607 S2 weighs 4.70kg / 10.3lbs and the Monitor Audio Bronze 50 weighs 5.00kg / 11lbs. This makes the Bronze 50 6% heavier than the 607 S2 AE.
Here is a comparison of how 607 S2 AE and Bronze 50's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of B&W 607 S2?
Here are the items that are included inside the box of 607 S2 AE:
2 Bookshelf loudspeakers 2 Grilles 2 Two-piece foam port plugs 8 Self-adhesive rubber feet 4 Jumper-straps (pre-installed) Manual Bowers & Wilkins brochure Warranty Information
What's in the Box of Monitor Audio Bronze 50?
Here are the items that come with the Bronze 50:
2 Bookshelf loudspeakers 2 Grilles 4 Terminal-jumpers (pre-installed) 2 Foam port plugs 8 Self-adhesive rubber feet Hex-key Quick Start Guide Important Safety Instructions
 Max Input Power |
100 watts
vs
80 watts
|
Handle more power from your amplifier |
 Base Surface Area |
385cm2 (166x232mm)
vs
439cm2 (166x265mm)
|
Takes less floor space |
 Sensitivity |
85 dB
vs
84 dB
|
Play louder with same amount of amplification power |
 Minimum Impedance |
4.4 ohms
vs
3.0 ohms
|
Very low impedance levels puts more pressure on amplifier |
 Woofer Size |
5.25 inches
vs
5 inches
|
Larger woofer |
| Low Frequency Response |
40 Hz
vs
52 Hz
|
Generates deeper bass |
 High Frequency Response |
30k Hz
vs
28k Hz
|
Generates higher frequency |
 Height |
281mm
vs
301mm
|
Easier to fit in smaller spaces |
 Price per pair* |
550USD
vs
799USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Bowers & Wilkins 607 S2 Anniversary Edition |
Monitor Audio Bronze 50 |
| Brand |
Bowers Wilkins |
Monitor Audio |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
30-100 watts |
20-80 watts |
| Sensitivity |
84 dB |
85 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
3.0 ohms |
4.4 ohms |
| Frequency Response |
52-28k Hz |
40-30k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5" |
5.25" |
| Woofer Composition |
Continuum |
C-CAM |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Decoupled Double Dome |
Hard-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
2500Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
301.0mm (11.9") |
281.0mm (11.1") |
| Width |
166.0mm (6.5") |
166.0mm (6.5") |
| Depth |
232.0mm (9.1") |
265.0mm (10.4") |
| Weight |
4.70kg (10.3lbs) |
5.00kg (11lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Matte Black, Matte White, Oak, Red Cherry |
Walnut, Black, White, Urban Grey |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-26" |
28-32" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |