In this review, we will be comparing Bronze 500 and RP-5000F, two Passive Floor-standing speakers from Monitor Audio and Klipsch. Let's have a brief look at the main features
of Monitor Audio Bronze 500 and Klipsch RP-5000F first before getting into our more
detailed comparison.
What size room are the Monitor Audio Bronze 500 and Klipsch RP-5000F speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Bronze 500 and Klipsch RP-5000F compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Bronze 500 and RP-5000F are 2-way speakers.
| Driver |
Monitor Audio Bronze 500 |
Klipsch RP-5000F |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 8-inch
|
2 x 5.25-inch
|
Bronze 500 features a 1" gold dome C-CAM with uniform dispersion (UD) waveguide Tweeter and 2 x 8" C-CAM Woofer . On the other hand, the RP-5000F features a 1" Tractrix Horn Tweeter and 2 x 5.25" Cerametallic Woofer .
Frequency Response
Bronze 500 has a frequency range of 32-30k Hz whereas RP-5000F has a frequency range of 35-25k Hz. With a minimum frequency of 32Hz, the Bronze 500 can go slightly deeper then the RP-5000F's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Bronze 500 and RP-5000F have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Bronze 500 sensitivity is rated at 90 dB and the RP-5000F's is at 96 dB. This 6 dB difference makes the Klipsch RP-5000F a more sensitive speaker compared to Monitor Audio Bronze 500, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Bronze 500 can handle a max power of 200 watts RMS from the amp the whereas RP-5000F has a max power handling value of 125 watts RMS, 75 watts less than the Bronze 500.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Bronze 500 and RP-5000F features dual binding post speaker terminals for bi-amping or bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Bronze 500's and Klipsch RP-5000F's external dimensions. Monitor Audio Bronze 500 has external dimensions of 977.0 x 294.0 x 366.0mm ( 38-7/16 x 11-9/16 x 14-3/8inch) whereas Klipsch RP-5000F has external dimensions of 920.0 x 207.0 x 364.0mm ( 36-3/16 x 8-1/8 x 14-5/16inch) .
Monitor Audio Bronze 500 is clearly the larger of the two speakers. Its body is 87mm wider, 57mm taller and 2mm deeper than Klipsch RP-5000F.
Below you can see the front view size comparison of Monitor Audio Bronze 500 and Klipsch RP-5000F in scale.
Comparison image of Monitor Audio Bronze 500 and Klipsch RP-5000F Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Bronze 500 is approximately 1076.0cm2 / 166.8inch2 and base area of the Klipsch RP-5000F is approximately 753.5cm2 / 116.8inch2. The Bronze 500 requires 43% more surface area than the RP-5000F which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Bronze 500 weighs 18.05kg / 39.7lbs and the Klipsch RP-5000F weighs 16.36kg / 36lbs. This makes the Bronze 500 10% heavier than the RP-5000F.
Here is a comparison of how Bronze 500 and RP-5000F's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Monitor Audio Bronze 500?
Here are the items that are included inside the box of Bronze 500:
Floorstanding loudspeakerGrille4 Outrigger feet (w/ 4 adjustment dials and locking-nuts)4 Spikes (pre-installed on outrigger feet)4 Rubber feet4 Large course-thread screws4 Small machine screws2 Terminal-jumpers (pre-installed)2 Foam port plugsHex-keyQuick Start GuideImportant Safety Instructions
What's in the Box of Klipsch RP-5000F?
Here are the items that come with the RP-5000F:
Floorstanding loudspeakerStabilizer feet (installed)Grille (installed)2 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information
 Max Input Power |
200 watts
vs
125 watts
|
Handle more power from your amplifier |
 Woofer Size |
8 inches
vs
5.25 inches
|
Larger woofer |
| Low Frequency Response |
32 Hz
vs
35 Hz
|
Generates deeper bass |
 High Frequency Response |
30k Hz
vs
25k Hz
|
Generates higher frequency |
 Dolby Atmos Drivers |
Optional
vs
No
|
Dolby Atmos Compatibility |
 Sensitivity |
96 dB
vs
90 dB
|
Play louder with same amount of amplification power |
 Height |
920mm
vs
977mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
753cm2 (207x364mm)
vs
1076cm2 (294x366mm)
|
Takes less floor space |
 Price per pair* |
1038USD
vs
1496USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Monitor Audio Bronze 500 |
Klipsch Reference Premiere RP-5000F |
| Brand |
Monitor Audio |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
60-200 watts |
up to 125 watts |
| Sensitivity |
90 dB |
96 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
32-30k Hz |
35-25k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
8" |
5.25" |
| Woofer Composition |
C-CAM |
Cerametallic |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
gold dome C-CAM with uniform dispersion (UD) waveguide |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
977.0mm (38.5") |
920.0mm (36.2") |
| Width |
294.0mm (11.6") |
207.0mm (8.1") |
| Depth |
366.0mm (14.4") |
364.0mm (14.3") |
| Weight |
18.05kg (39.7lbs) |
16.36kg (36lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
Walnut, Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |