In this review, we will be comparing Debut 2.0 F6.2 and BP-9020, two Passive Floor-standing speakers from ELAC and Definitive Technology.
Let's have a brief look at the main features
of ELAC Debut 2.0 F6.2 and Definitive BP-9020 first before getting into our more
detailed comparison.
ELAC Debut 2.0 F6.2 Key Specs
- 3-way Design
- 1" dome with wide-dispersion waveguide Tweeter
- 6.5" Midrange
- 2 x 6.5" Woven Aramid-Fiber Woofer
- 39-35k Hz Frequency Response
- 87 dB Sensitivity
- Impedance: 6ohms
- Power Range:up to 140watts
- Weight:19.95kg
- Dimensions (H x W x D): 1126.0" x 8-1/8" x 11-5/8"( 1126.0 x 207.0 x 296.0mm )
Definitive BP-9020 Key Specs
- 3-way Design
- 1" dome Tweeter
- 3.5" Midrange
- 8" Polypropelene Woofer
- 3.5" Midrange
- 28-40k Hz Frequency Response
- 92 dB Sensitivity
- Impedance: 8ohms
- Power Range:50-200watts
- Weight:13.64kg
- Dimensions (H x W x D): 904.0" x 11-1/16" x 13-13/16"( 904.0 x 281.0 x 351.0mm )
What size room are the ELAC Debut 2.0 F6.2 and Definitive BP-9020 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
ELAC Debut 2.0 F6.2 |
Definitive BP-9020 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Poor |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the ELAC Debut 2.0 F6.2 and Definitive BP-9020 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Debut 2.0 F6.2 and BP-9020 are 3-way speakers.
| Driver |
ELAC Debut 2.0 F6.2 |
Definitive BP-9020 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 6.5-inch |
3 x 3.5-inch |
|
Woofer
|
2 x 6.5-inch
|
1 x 8-inch
|
Debut 2.0 F6.2 features a 1" silk dome with wide-dispersion waveguide Tweeter , a 6.5" Midrange and 2 x 6.5" Woven Aramid-Fiber Woofer with a Crossover frequency at 90Hz and 2200Hz. On the other hand, the BP-9020 features a 1" annealed aluminum dome Tweeter , a 3.5" Midrange and 1 x 8" Polypropelene Woofer .
Frequency Response
Debut 2.0 F6.2 has a frequency range of 39-35k Hz whereas BP-9020 has a frequency range of 28-40k Hz. With a minimum frequency of 28Hz, the BP-9020 can go significantly deeper on the low side and provide stronger bass compared to the Debut 2.0 F6.2's min frequency of 39Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Debut 2.0 F6.2 is a 6 ohms speaker compared to the BP-9020 which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. Debut 2.0 F6.2 sensitivity is rated at 87 dB and the BP-9020's is rated at 92 dB. This 5 dB difference makes the Definitive BP-9020 a more sensitive speaker compared to ELAC Debut 2.0 F6.2, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Debut 2.0 F6.2 can handle a max power of 200 watts RMS from the amp the whereas Debut 2.0 F6.2 has a max power handling value of 140 watts RMS , 60 watts less than the BP-9020.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Debut 2.0 F6.2 features 5-Way post, RCA type posts and BP-9020 has a 5-Way post, RCA type posts. None of these speakers feature bi-amping/bi-wiring.
ELAC Debut 2.0 F6.2's 5-Way post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut 2.0 F6.2's and Definitive BP-9020's external dimensions. ELAC Debut 2.0 F6.2 has external dimensions of 1126.0 x 207.0 x 296.0mm ( 44-5/16 x 8-1/8 x 11-5/8inch) whereas Definitive BP-9020 has external dimensions of 904.0 x 281.0 x 351.0mm ( 35-9/16 x 11-1/16 x 13-13/16inch) .
ELAC Debut 2.0 F6.2 is 74mm narrower and 55mm less deeper than Definitive BP-9020 but it is also 222mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Debut 2.0 F6.2 is approximately 612.7cm2 / 95.0inch2 and base area of the Definitive BP-9020 is approximately 986.3cm2 / 152.9inch2. The Debut 2.0 F6.2 requires 38% less surface area than the BP-9020 which gives it a small advantage on placement in tight spaces.