In this review, we will be comparing SE 6000F and S60, two Passive Floor-standing speakers from Paradigm and Polk Audio. Let's have a brief look at the main features
of Paradigm SE 6000F and Polk S60 first before getting into our more
detailed comparison.
What size room are the Paradigm SE 6000F and Polk S60 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Paradigm SE 6000F and Polk S60 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that SE 6000F is a 3-way design whereas the S60 is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Driver |
Paradigm SE 6000F |
Polk S60 |
Driver Setup
|
3-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
1 x 5.5-inch |
- |
Woofer
|
3 x 5.5-inch
|
3 x 6.5-inch
|
SE 6000F features a 1" Tweeter , a 5.5" Midrange and 3 x 5.5" Mineral-filled polypropylene Woofer . On the other hand, the S60 features a 1" Terylene Dome Tweeter and 3 x 6.5" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz.
Frequency Response
SE 6000F has a frequency range of 53-21k Hz whereas S60 has a frequency range of 26-40k Hz. With a minimum frequency of 26Hz, the S60 can go significantly deeper on the low side and provide stronger bass compared to the SE 6000F's min frequency of 53Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
SE 6000F and S60 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. SE 6000F sensitivity is rated at 93 dB and the S60's is at 90 dB. This 3 dB difference makes the Paradigm SE 6000F a more sensitive speaker compared to Polk S60, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
SE 6000F can handle a max power of 300 watts RMS from the amp the whereas SE 6000F has a max power handling value of 100 watts RMS , 200 watts less than the S60.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
S60 features 5-way post posts which make bi-amping or bi-wiring possible. SE 6000F has a Post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
SE 6000F has a rear firing port whereas S60 has a bottom firing ports. Polk S60's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Paradigm SE 6000F with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Paradigm SE 6000F's and Polk S60's external dimensions. Paradigm SE 6000F has external dimensions of 1051.0 x 228.0 x 361.0mm ( 41-3/8 x 8-15/16 x 14-3/16inch) whereas Polk S60 has external dimensions of 1131.0 x 299.0 x 401.0mm ( 44-1/2 x 11-3/4 x 15-3/4inch) .
Polk S60 is clearly the larger of the two speakers. Its body is 71mm wider, 80mm taller and 40mm deeper than Paradigm SE 6000F.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Paradigm SE 6000F is approximately 823.1cm2 / 127.6inch2 and base area of the Polk S60 is approximately 1199.0cm2 / 185.8inch2. The SE 6000F requires 31% less surface area than the S60 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Paradigm SE 6000F weighs 20.00kg / 44lbs and the Polk S60 weighs 23.60kg / 51.9lbs. This makes the S60 18% heavier than the SE 6000F.
Here is a comparison of how SE 6000F and S60's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Paradigm SE 6000F?
Here are the items that are included inside the box of SE 6000F:
Floorstanding loudspeaker
4 Rubber feet
4 Spike feet
Owner's Manual
Online Registration Card
Unboxing Instructions
What's in the Box of Polk S60?
Here are the items that come with the S60:
Floorstanding loudspeakerGrille (attached)4 Feet (pre-installed)Owners ManualOnline Product Registration
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Sensitivity |
93 dB
vs
90 dB
|
Play louder with same amount of amplification power |
Height |
1051mm
vs
1131mm
|
Easier to fit in smaller spaces |
Base Surface Area |
823cm2 (228x361mm)
vs
1199cm2 (299x401mm)
|
Takes less floor space |
Max Input Power |
300 watts
vs
100 watts
|
Handle more power from your amplifier |
Woofer Size |
6.5 inches
vs
5.5 inches
|
Larger woofer |
Low Frequency Response |
26 Hz
vs
53 Hz
|
Generates deeper bass |
High Frequency Response |
40k Hz
vs
21k Hz
|
Generates higher frequency |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Price per pair* |
898USD
vs
1000USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Paradigm Monitor SE 6000F |
Polk Audio Signature S60 |
Brand |
Paradigm |
Polk Audio |
Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
Power Range |
15-100 watts |
20-300 watts |
Sensitivity |
93 dB |
90 dB |
Impedance |
8 ohms |
8 ohms |
Frequency Response |
53-21k Hz |
26-40k Hz |
Drivers |
|
|
Woofer Quantity |
3 |
3 |
Woofer Size |
5.5" |
6.5" |
Woofer Composition |
Mineral-filled polypropylene |
Mica-reinforced polypropylene |
Woofer Surround Material |
Rubber |
Butyl rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
n/a |
Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
5.5" |
No |
Crossover Frequency |
n/a |
2500Hz |
Firing Direction |
rear |
bottom |
Physical Specs |
|
|
Height |
1051.0mm (41.4") |
1131.0mm (44.5") |
Width |
228.0mm (9") |
299.0mm (11.8") |
Depth |
361.0mm (14.2") |
401.0mm (15.8") |
Weight |
20.00kg (44lbs) |
23.60kg (51.9lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Vinyl |
Meddite MDF |
Available Colors |
Black |
Black |
Grille |
n/a |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |