In this review, we will be comparing R6 Meta and L400, two Passive Center Channel speakers from KEF and Polk Audio.
Let's have a brief look at the main features
of KEF R6 Meta and Polk L400 first before getting into our more
detailed comparison.
KEF R6 Meta Key Specs
- 3-way Design
- 12th Generation Uni-Q Driver
- 1" Hard-Dome Tweeter
- 5" Midrange
- 2 x 6.5" Hybrid Aluminum Woofer
- 65-28k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:15-250watts
- Weight:17.82kg
- Dimensions (H x W x D): 202.0" x 24-5/8" x 13-5/16"( 202.0 x 626.0 x 339.0mm )
Polk L400 Key Specs
- 3-way Design
- 1" Pinnacle Ring Radiator Tweeter
- 4" Midrange
- 2 x 6.5" Woofer
- 4" Midrange
- 55-38k Hz Frequency Response
- 87.5 dB Sensitivity
- Impedance: 4ohms
- Power Range:25-300watts
- Weight:18.55kg
- Dimensions (H x W x D): 245.0" x 26-1/16" x 13-1/2"( 245.0 x 662.0 x 343.0mm )
What size room are the KEF R6 Meta and Polk L400 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
Listening Environment* |
KEF R6 Meta |
Polk L400 |
Near-field |
Poor |
Poor |
Small Room |
Poor |
Poor |
Mid-size Room |
Good |
Good |
Large Room |
Good |
Good |
Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the KEF R6 Meta and Polk L400 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both R6 Meta and L400 are 3-way speakers.
Driver |
KEF R6 Meta |
Polk L400 |
Driver Setup
|
3-way
|
3-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
1 x 5-inch |
1 x 4-inch |
Woofer
|
2 x 6.5-inch
|
2 x 6.5-inch
|
R6 Meta features a 1" Aluminum with MAT absorber Hard-Dome Tweeter , a 5" Midrange and 2 x 6.5" Hybrid Aluminum Woofer with a Crossover frequency at 500Hz and 2400Hz. On the other hand, the L400 features a 1" Pinnacle Ring Radiator Tweeter , a 4" Midrange and 2 x 6.5" Woofer .
Frequency Response
R6 Meta has a frequency range of 65-28k Hz whereas L400 has a frequency range of 55-38k Hz. With a minimum frequency of 55Hz, the L400 can go significantly deeper on the low side and provide stronger bass compared to the R6 Meta's min frequency of 65Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
R6 Meta and L400 have the same Impedance of 4 ohms but where they differ is the sensitivity levels. R6 Meta sensitivity is rated at 88 dB and the L400's is at 87.5 dB.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the R6 Meta and the R6 Meta can provide this impedance level.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
R6 Meta can handle a max power of 300 watts RMS from the amp the whereas R6 Meta has a max power handling value of 250 watts RMS , 50 watts less than the L400.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
R6 Meta features Custom 5-way bi-wire tool-less binding posts posts which make bi-amping or bi-wiring possible. L400 has a Binding post which doesn't feature bi-amping/bi-wiring.
KEF R6 Meta's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
Polk L400's Binding post terminals
Polk L400 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF R6 Meta's and Polk L400's external dimensions. KEF R6 Meta has external dimensions of 202.0 x 626.0 x 339.0mm ( 7-15/16-inch x 24-5/8-inch x 13-5/16-inch) whereas Polk L400 has external dimensions of 245.0 x 662.0 x 343.0mm ( 9-5/8 x 26-1/16 x 13-1/2inch) .
Polk L400 is clearly the larger of the two speakers. Its body is 36mm wider, 43mm taller and 4mm deeper than KEF R6 Meta.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF R6 Meta is approximately 2122.1cm2 / 328.9inch2 and base area of the Polk L400 is approximately 2270.7cm2 / 352.0inch2. The R6 Meta requires 7% less surface area than the L400 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The KEF R6 Meta weighs 17.82kg / 39.2lbs and the Polk L400 weighs 18.55kg / 40.8lbs. This makes the L400 4% heavier than the R6 Meta.
Here is a comparison of how R6 Meta and L400's weights compare with the average, max and min weights in Passive Center Channel class.
Weight
All Center Channel Speakers
What's in the Box of KEF R6 Meta?
Here are the items that are included inside the box of R6 Meta:
1 R2 Meta 1 microfiber grille Rubber feet User manual and warranty information
What's in the Box of Polk L400?
Here are the items that come with the L400:
Center-channel loudspeakerGrille2 Jumper-wiresCleaning clothOwners ManualOnline Registration
Height |
202mm
vs
245mm
|
Easier to fit in smaller spaces |
Base Surface Area |
2122cm2
vs
2270cm2
|
Takes less floor space |
Max Input Power |
300 watts
vs
250 watts
|
Handle more power from your amplifier |
Low Frequency Response |
55 Hz
vs
65 Hz
|
Generates deeper bass |
High Frequency Response |
38k Hz
vs
28k Hz
|
Generates higher frequency |
Price per pair* |
1799USD
vs
1999USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
KEF R6 Meta |
Polk Audio Legend L400 |
Brand |
KEF |
Polk Audio |
Speaker Type |
Center channel speaker |
Center channel speaker |
Power Range |
15-250 watts |
25-300 watts |
Sensitivity |
88 dB |
87.5 dB |
Impedance |
4 ohms |
4 ohms |
Impedance |
3.2 ohms |
n/a |
Frequency Response |
65-28k Hz |
55-38k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
2 |
Woofer Size |
6.5" |
6.5" |
Woofer Composition |
Hybrid Aluminum |
|
Woofer Surround Material |
Rubber |
n/a |
Tweeter Size |
1" |
1" |
Tweeter Type |
Hard-Dome |
Pinnacle Ring Radiator |
Aimable Tweeter |
No |
No |
Midrange Driver |
5" |
4" |
Crossover Frequency |
500Hz and 2400Hz |
n/a |
Firing Direction |
n/a |
rear |
Physical Specs |
|
|
Height |
202.0mm (8") |
245.0mm (9.6") |
Width |
626.0mm (24.6") |
662.0mm (26.1") |
Depth |
339.0mm (13.3") |
343.0mm (13.5") |
Weight |
17.82kg (39.2lbs) |
18.55kg (40.8lbs) |
Enclosure |
Sealed |
Bass Reflex |
Available Colors |
Black Gloss, White Gloss, Walnut |
Black, Walnut |
Grille |
n/a |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
n/a |
Other |
|
|
Parts Warranty |
5 years |
5 Years |
Labor Warranty |
5 years |
5 Years |