In this review, we will be comparing Studio 690 and Bronze 500, two Passive Floor-standing speakers from JBL and Monitor Audio. Let's have a brief look at the main features
of JBL Studio 690 and Monitor Audio Bronze 500 first before getting into our more
detailed comparison.
What size room are the JBL Studio 690 and Monitor Audio Bronze 500 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the JBL Studio 690 and Monitor Audio Bronze 500 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Studio 690 and Bronze 500 are 2-way speakers.
| Driver |
JBL Studio 690 |
Monitor Audio Bronze 500 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 8-inch
|
2 x 8-inch
|
Studio 690 features a 1" compression driver with HDI (High Definition Imaging) waveguide Tweeter and 2 x 8" PolyPlas Woofer . On the other hand, the Bronze 500 features a 1" gold dome C-CAM with uniform dispersion (UD) waveguide Tweeter and 2 x 8" C-CAM Woofer .
Frequency Response
Studio 690 has a frequency range of 36-40k Hz whereas Bronze 500 has a frequency range of 32-30k Hz. With a minimum frequency of 32Hz, the Bronze 500 can go slightly deeper then the Studio 690's min frequency of 36Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Studio 690 is a 6 ohms speaker compared to the Bronze 500 which has a nominal impedance of 8 ohms.
On the other hand, they have the same sensitivity of 90 dBdB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Studio 690 can handle a max power of 250 watts RMS from the amp the whereas Bronze 500 has a max power handling value of 200 watts RMS, 50 watts less than the Studio 690.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Studio 690 and Bronze 500 features dual binding post speaker terminals for bi-amping or bi-wiring.
JBL Studio 690's 5-Way post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare JBL Studio 690's and Monitor Audio Bronze 500's external dimensions. JBL Studio 690 has external dimensions of 1096.0 x 299.0 x 383.0mm ( 43-1/8-inch x 11-3/4-inch x 15-1/16-inch) whereas Monitor Audio Bronze 500 has external dimensions of 977.0 x 294.0 x 366.0mm ( 38-7/16 x 11-9/16 x 14-3/8inch) .
JBL Studio 690 is clearly the larger of the two speakers. Its body is 5mm wider, 119mm taller and 17mm deeper than Monitor Audio Bronze 500.
Below you can see the front view size comparison of JBL Studio 690 and Monitor Audio Bronze 500 in scale.
Comparison image of JBL Studio 690 and Monitor Audio Bronze 500 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the JBL Studio 690 is approximately 1145.2cm2 / 177.5inch2 and base area of the Monitor Audio Bronze 500 is approximately 1076.0cm2 / 166.8inch2. The Studio 690 requires 6% more surface area than the Bronze 500 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The JBL Studio 690 weighs 29.45kg / 64.8lbs and the Monitor Audio Bronze 500 weighs 18.05kg / 39.7lbs. This makes the Studio 690 63% heavier than the Bronze 500.
Here is a comparison of how Studio 690 and Bronze 500's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of JBL Studio 690?
Here are the items that are included inside the box of Studio 690:
Floorstanding loudspeakerGrille4 Spike feet4 Washers4 Locking-collars4 Foot-pads2 Jumper-straps (pre-installed)Owners ManualWarranty Card
What's in the Box of Monitor Audio Bronze 500?
Here are the items that come with the Bronze 500:
Floorstanding loudspeakerGrille4 Outrigger feet (w/ 4 adjustment dials and locking-nuts)4 Spikes (pre-installed on outrigger feet)4 Rubber feet4 Large course-thread screws4 Small machine screws2 Terminal-jumpers (pre-installed)2 Foam port plugsHex-keyQuick Start GuideImportant Safety Instructions
 Max Input Power |
250 watts
vs
200 watts
|
Handle more power from your amplifier |
 High Frequency Response |
40k Hz
vs
30k Hz
|
Generates higher frequency |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
 Low Frequency Response |
32 Hz
vs
36 Hz
|
Generates deeper bass |
 Dolby Atmos Drivers |
Optional
vs
No
|
Dolby Atmos Compatibility |
 Height |
977mm
vs
1096mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1076cm2 (294x366mm)
vs
1145cm2 (299x383mm)
|
Takes less floor space |
 Price per pair* |
1496USD
vs
1498USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
JBL Studio 690 |
Monitor Audio Bronze 500 |
| Brand |
JBL |
Monitor Audio |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 250 watts |
60-200 watts |
| Sensitivity |
90 dB |
90 dB |
| Impedance |
6 ohms |
8 ohms |
| Frequency Response |
36-40k Hz |
32-30k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
8" |
8" |
| Woofer Composition |
PolyPlas |
C-CAM |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
compression driver with HDI (High Definition Imaging) waveguide |
gold dome C-CAM with uniform dispersion (UD) waveguide |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
rear |
n/a |
Physical Specs |
|
|
| Height |
1096.0mm (43.1") |
977.0mm (38.5") |
| Width |
299.0mm (11.8") |
294.0mm (11.6") |
| Depth |
383.0mm (15.1") |
366.0mm (14.4") |
| Weight |
29.45kg (64.8lbs) |
18.05kg (39.7lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Vinyl |
| Available Colors |
Wood, Dark Wood |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |