In this review, we will be comparing Studio 680 and Bronze 500, two Passive Floor-standing speakers from JBL and Monitor Audio.
Let's have a brief look at the main features
of JBL Studio 680 and Monitor Audio Bronze 500 first before getting into our more
detailed comparison.
JBL Studio 680 Key Specs
- 2-way Design
- 1" compression driver with HDI (High Definition Imaging) waveguide Tweeter
- 2 x 6.5" PolyPlas Woofer
- 38-40k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 6ohms
- Power Range:up to 200watts
- Weight:22.68kg
- Dimensions (H x W x D): 1036.0" x 8-15/16" x 12-1/16"( 1036.0 x 228.0 x 307.0mm )
Monitor Audio Bronze 500 Key Specs
- 2-way Design
- 1" gold dome C-CAM with uniform dispersion (UD) waveguide Tweeter
- 2 x 8" C-CAM Woofer
- 32-30k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:60-200watts
- Weight:18.05kg
- Dimensions (H x W x D): 977.0" x 11-9/16" x 14-3/8"( 977.0 x 294.0 x 366.0mm )
What size room are the JBL Studio 680 and Monitor Audio Bronze 500 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
JBL Studio 680 |
Monitor Audio Bronze 500 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the JBL Studio 680 and Monitor Audio Bronze 500 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Studio 680 and Bronze 500 are 2-way speakers.
| Driver |
JBL Studio 680 |
Monitor Audio Bronze 500 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6.5-inch
|
2 x 8-inch
|
Studio 680 features a 1" compression driver with HDI (High Definition Imaging) waveguide Tweeter and 2 x 6.5" PolyPlas Woofer . On the other hand, the Bronze 500 features a 1" gold dome C-CAM with uniform dispersion (UD) waveguide Tweeter and 2 x 8" C-CAM Woofer .
Frequency Response
Studio 680 has a frequency range of 38-40k Hz whereas Bronze 500 has a frequency range of 32-30k Hz. With a minimum frequency of 32Hz, the Bronze 500 can go significantly deeper on the low side and provide stronger bass compared to the Studio 680's min frequency of 38Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Studio 680 is a 6 ohms speaker compared to the Bronze 500 which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. Studio 680 sensitivity is rated at 88 dB and the Bronze 500's is rated at 90 dB. This 2 dB difference makes the Monitor Audio Bronze 500 a more sensitive speaker compared to JBL Studio 680, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Studio 680 and Bronze 500 features dual binding post speaker terminals for bi-amping or bi-wiring.
JBL Studio 680's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare JBL Studio 680's and Monitor Audio Bronze 500's external dimensions. JBL Studio 680 has external dimensions of 1036.0 x 228.0 x 307.0mm ( 40-3/4-inch x 8-15/16-inch x 12-1/16-inch) whereas Monitor Audio Bronze 500 has external dimensions of 977.0 x 294.0 x 366.0mm ( 38-7/16 x 11-9/16 x 14-3/8inch) .
JBL Studio 680 is 66mm narrower and 59mm less deeper than Monitor Audio Bronze 500 but it is also 59mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the JBL Studio 680 is approximately 700.0cm2 / 108.5inch2 and base area of the Monitor Audio Bronze 500 is approximately 1076.0cm2 / 166.8inch2. The Studio 680 requires 35% less surface area than the Bronze 500 which gives it a small advantage on placement in tight spaces.