In this review, we will be comparing Omada No.1 and 606 S2 AE, two Passive Bookshelf speakers from Focal and Bowers Wilkins.
Let's have a brief look at the main features
of Focal Omada No.1 and B&W 606 S2 first before getting into our more
detailed comparison.
Focal Omada No.1 Key Specs
- 2-way Design
- 1" Inverted Hard-Dome Tweeter
- 6.5" Carbon Fiber + Polymer Woofer
- 56-30k Hz Frequency Response
- 89.5 dB Sensitivity
- Impedance: 8ohms
- Power Range:25-120watts
- Weight:7.00kg
- Dimensions (H x W x D): 388.0" x 8-5/8" x 10-3/4"( 388.0 x 220.0 x 274.0mm )
B&W 606 S2 Key Specs
- 2-way Design
- 1" Decoupled Double Dome Tweeter
- 6.5" Continuum Woofer
- 52-28k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:30-120watts
- Weight:6.90kg
- Dimensions (H x W x D): 347.0" x 7-1/2" x 12-13/16"( 347.0 x 191.0 x 326.0mm )
In the following sections, we will get into more detail in order to better understand how the Focal Omada No.1 and B&W 606 S2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Omada No.1 and 606 S2 AE are 2-way speakers.
| Driver |
Focal Omada No.1 |
B&W 606 S2 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
Omada No.1 features a 1" Al/Mg Inverted Hard-Dome Tweeter and 1 x 6.5" Carbon Fiber + Polymer Woofer . On the other hand, the 606 S2 AE features a 1" Aluminum Decoupled Double Dome Tweeter and 1 x 6.5" Continuum Woofer .
Frequency Response
Omada No.1 has a frequency range of 56-30k Hz whereas 606 S2 AE has a frequency range of 52-28k Hz. With a minimum frequency of 52Hz, the 606 S2 AE can go slightly deeper then the Omada No.1's min frequency of 56Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Omada No.1 and 606 S2 AE have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Omada No.1 sensitivity is rated at 89.5 dB and the 606 S2 AE's is at 88 dB. This 2 dB difference makes the Focal Omada No.1 a more sensitive speaker compared to B&W 606 S2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
606 S2 AE features Binding post posts which make bi-amping or bi-wiring possible. Omada No.1 has a Binding post which doesn't feature bi-amping/bi-wiring.
B&W 606 S2's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Omada No.1 has a front firing port whereas 606 S2 AE has a rear firing ports. Focal Omada No.1's front-firing port gives more flexibility in placement in regards to proximity to walls compared to B&W 606 S2 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Focal Omada No.1's and B&W 606 S2's external dimensions. Focal Omada No.1 has external dimensions of 388.0 x 220.0 x 274.0mm ( 15-1/4inch x 8-5/8inch x 10-3/4inch ) whereas B&W 606 S2 has external dimensions of 347.0 x 191.0 x 326.0mm ( 13-5/8 x 7-1/2 x 12-13/16inch) .
B&W 606 S2 is 29mm narrower and 41mm shorter than Focal Omada No.1 but it is also 52mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Focal Omada No.1 is approximately 602.8cm2 / 93.4inch2 and base area of the B&W 606 S2 is approximately 622.7cm2 / 96.5inch2. The Omada No.1 requires 3% less surface area than the 606 S2 AE which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Focal Omada No.1 weighs 7.00kg / 15.4lbs and the B&W 606 S2 weighs 6.90kg / 15.2lbs. This makes the Omada No.1 1% heavier than the 606 S2 AE.
Here is a comparison of how Omada No.1 and 606 S2 AE's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Focal Omada No.1?
Here are the items that are included inside the box of Omada No.1:
2 Bookshelf speakers 2 Grilles 8 rubber feet Cleaning cloth User Manual Focal brochure
What's in the Box of B&W 606 S2?
Here are the items that come with the 606 S2 AE:
2 Bookshelf loudspeakers 2 Grilles 2 Two-piece foam port plugs 8 Self-adhesive rubber feet 4 Jumper-straps (pre-installed) Manual Bowers & Wilkins brochure Warranty Information
 Sensitivity |
90 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 High Frequency Response |
30k Hz
vs
28k Hz
|
Generates higher frequency |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Base Surface Area |
602cm2
vs
622cm2
|
Takes less floor space |
 Price per pair* |
898USD
vs
999USD
|
costs less (*prices may change depending on the seller, location and time) |
 Low Frequency Response |
52 Hz
vs
56 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
347mm
vs
388mm
|
Easier to fit in smaller spaces |
| General |
Focal Omada No.1 |
Bowers & Wilkins 606 S2 Anniversary Edition |
| Brand |
Focal |
Bowers Wilkins |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
25-120 watts |
30-120 watts |
| Sensitivity |
89.5 dB |
88 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
n/a |
3.7 ohms |
| Frequency Response |
56-30k Hz |
52-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Carbon Fiber + Polymer |
Continuum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Inverted Hard-Dome |
Decoupled Double Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
rear |
Physical Specs |
|
|
| Height |
388.0mm (15.3") |
347.0mm (13.7") |
| Width |
220.0mm (8.7") |
191.0mm (7.5") |
| Depth |
274.0mm (10.8") |
326.0mm (12.8") |
| Weight |
7.00kg (15.4lbs) |
6.90kg (15.2lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Lacquer |
MDF/Vinyl |
| Available Colors |
Black |
Matte Black, Matte White, Oak, Red Cherry |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
22-24" |
24-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |