MartinLogan Axis is a 2-way Passive In-wall In-wall speaker by MartinLogan. It was released in 2016. It features a 1.25x2.4" Folded Motion Ribbon Tweeter and 2 x 5.25" Aluminum Woofer. The speaker has a frequency range of 45-25kHz and a sensitivity of 94 dB. MartinLogan Axis has an MSRP of 2600$ per pair.
Room Size Suitability
The size of the room where you plan to use the MartinLogan Axis is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Poor |
| Small Room | Poor |
| Mid-size Room | Good |
| Large Room | Good |
| Very Large Room | Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Frequency Response of the MartinLogan Axis Speaker
MartinLogan Axis has a Frequency response range of 45-25kHz and Power Range of 20-250 watts. With a minimum frequency of 45 Hz, Axis delivers moderate bass depth so depending on your use case, you might want to consider adding a subwoofer to your system.
Here we have a comparison of how Axis's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
In-wall Speakers
Thinking about a subwoofer for the MartinLogan Axis?
Impedance and Sensitivity
MartinLogan Axis's nominal impedance level is
4 ohms and has a sensitivity of
94 dB.
Sensitivity
In-wall Speakers
Nominal Impedance of the 4 Ohms means that the MartinLogan Axis is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the MartinLogan Axis with an AVR but use an Integrated Amplifier instead.
Sensitivity
94dB of the MartinLogan Axis is considered a high sensitivity compared to average stereo speaker which makes Axis an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the MartinLogan Axis will be a good choice. Work out how loud the MartinLogan Axis plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the MartinLogan Axis need?
At normal listening levels in a medium room, about
6.0–95 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $3,000, or every amplifier we cover.
Input Type
Axis features Spring post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
MartinLogan Axis External Dimensions and Weight
MartinLogan Axis has external dimensions of (Height x Width x Depth) 14.4375-inch x 7.1250-inch x 3.7500-inch (367.0 x 181.0 x 96.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of MartinLogan Axis is approximately 173.8cm2 / 26.9inch2.
Find speakers that fit your shelf or alcove →
Cabinet type and Materials
MartinLogan Axis has a
In-wall type cabinet.
What's in the Box of MartinLogan Axis?
Here are the items that are included inside the box of Axis:
- In-wall speaker
- Grille
- Paint shield
- User-feets Manual
- Install Template
Recommended Accessories
Here is a list of accessories that we think you may need for the MartinLogan Axis.
Warranty
5 Years w/registration of parts warranty and 5 Years w.registration of labor warranty is generally provided by the manufacturer.