In this review, we will be comparing TSi200 and TSi200, two Passive Bookshelf speakers by Polk Audio Let's have a brief look at the main features
of Polk TSi200 and Polk TSi200 first before getting into our more
detailed comparison.
Polk TSi200 Key Specs
- 2-way Design
- 1" Dome Tweeter
- 2 x 5.25" Organic Fiber Woofer
- 50-24k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 8ohms
- Power Range:20-150watts
- Weight:7.71kg
- Dimensions (H x W x D): 392.1" x 8.0" x 11.7"( 392.1 x 203.2 x 298.5mm )
Polk TSi200 Key Specs
- 2-way Design
- 1" Dome Tweeter
- 2 x 5.25" Organic Fiber Woofer
- 50-24k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 8ohms
- Power Range:20-150watts
- Weight:7.71kg
- Dimensions (H x W x D): 392.1" x 8.0" x 11.7"( 392.1 x 203.2 x 298.5mm )
TSi200 and TSi200 are members of Polk Audio's TSi series of speakers. Below you can find the loudspeakers from this series.
What size room are the Polk TSi200 and Polk TSi200 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
Polk TSi200 |
Polk TSi200 |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Polk TSi200 and Polk TSi200 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both TSi200 and TSi200 are 2-way speakers.
| Driver |
Polk TSi200 |
Polk TSi200 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5.25-inch
|
2 x 5.25-inch
|
TSi200 features a 1" Dome Tweeter and 2 x 5.25" Organic Fiber Woofer with a Crossover frequency at 2500Hz. On the other hand, the TSi200 features a 1" Dome Tweeter and 2 x 5.25" Organic Fiber Woofer with a Crossover frequency at 2500Hz.
Frequency Response
TSi200 and TSi200 has exactly the same frequency range of 50-24k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
TSi200 and TSi200 have the same Impedance of 8 ohms and their sensitivity is also same at 89 dB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
TSi200 and TSi200 has the same power range of 20-150 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
TSi200 features Pair of 5-way binding posts - Gold-plated type posts and TSi200 has a Pair of 5-way binding posts - Gold-plated type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both TSi200 and TSi200 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk TSi200's and Polk TSi200's external dimensions. Polk TSi200 has external dimensions of 392.1 x 203.2 x 298.5mm ( 15.4 x 8.0 x 11.7inch) whereas Polk TSi200 has external dimensions of 392.1 x 203.2 x 298.5mm ( 15.4 x 8.0 x 11.7inch) .
In this case, we can see that Polk TSi200 and Polk TSi200 have the exact same height, width and thickness.
Below you can see the front view size comparison of Polk TSi200 and Polk TSi200 in scale.
Comparison image of Polk TSi200 and Polk TSi200 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk TSi200 is approximately 606.6cm2 / 94.0inch2 and base area of the Polk TSi200 is approximately 606.6cm2 / 94.0inch2.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Polk TSi200 and Polk TSi200 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk TSi200 weighs 7.71kg / 17lbs and the Polk TSi200 weighs 7.71kg / 17lbs.
Here is a comparison of how TSi200 and TSi200's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk TSi200?
Here are the items that are included inside the box of TSi200:
2 Black bookshelf speakers Detachable cloth grille (installed) 8 Self-adhesive rubber feet Owner's Manual Online registration sheet Polk Audio product brochure
What's in the Box of Polk TSi200?
Here are the items that come with the TSi200:
2 Black bookshelf speakers Detachable cloth grille (installed) 8 Self-adhesive rubber feet Owner's Manual Online registration sheet Polk Audio product brochure