In this review, we will be comparing two different type of speakers by JBL. JBL Studio 690 is a Floor-standing speaker whereas the Studio 6 Architectural 6IW is a In-wall speaker.
Let's have a brief look at the main features
of JBL Studio 690 and JBL Studio 6 Architectural 6IW first before getting into our more
detailed comparison.
Studio 690 and Studio 6 Architectural 6IW are members of JBL's Studio series of speakers. Below you can find the loudspeakers from this series.
JBL Studio Series History
What size room are the JBL Studio 690 and JBL Studio 6 Architectural 6IW speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the JBL Studio 690 and JBL Studio 6 Architectural 6IW compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Studio 690 and Studio 6 Architectural 6IW are 2-way speakers.
| Driver |
JBL Studio 690 |
JBL Studio 6 Architectural 6IW |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 8-inch
|
1 x 6.5-inch
|
Studio 690 features a 1" compression driver with HDI (High Definition Imaging) waveguide Tweeter and 2 x 8" PolyPlas Woofer . On the other hand, the Studio 6 Architectural 6IW features a 1" Horn-Loaded Tweeter and 1 x 6.5" Polyplas Woofer .
Frequency Response
Studio 690 has a frequency range of 36-40k Hz whereas Studio 6 Architectural 6IW has a frequency range of 45-20kHz. With a minimum frequency of 36Hz, the Studio 690 can go significantly deeper on the low side and provide stronger bass compared to the Studio 6 Architectural 6IW's min frequency of 45Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Studio 6 Architectural 6IW
High Frequency
Floor-standing Speakers
JBL Studio 6 Architectural 6IW
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Studio 690 and Studio 6 Architectural 6IW have the same Impedance of 6 ohms but where they differ is the sensitivity levels. Studio 690 sensitivity is rated at 90 dB and the Studio 6 Architectural 6IW's is at 91 dB. This 1 dB difference makes the JBL Studio 6 Architectural 6IW a more sensitive speaker compared to JBL Studio 690, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Studio 6 Architectural 6IW
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Studio 690 can handle a max power of 250 watts RMS from the amp the whereas Studio 6 Architectural 6IW has a max power handling value of 70 watts RMS, 180 watts less than the Studio 690.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Studio 690 features 5-Way post posts which make bi-amping or bi-wiring possible. Studio 6 Architectural 6IW has a Spring post which doesn't feature bi-amping/bi-wiring.
JBL Studio 690's 5-Way post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare JBL Studio 690's and JBL Studio 6 Architectural 6IW's external dimensions. JBL Studio 690 has external dimensions of 1096.0 x 299.0 x 383.0mm ( 43-1/8-inch x 11-3/4-inch x 15-1/16-inch) whereas JBL Studio 6 Architectural 6IW has external dimensions of 275.0 x 181.0 x 94.0mm ( 10.8125-inch x 7.1250-inch x 3.6875-inch) .
JBL Studio 690 is clearly the larger of the two speakers. Its body is 118mm wider, 821mm taller and 289mm deeper than JBL Studio 6 Architectural 6IW.
What's in the Box of JBL Studio 690?
Here are the items that are included inside the box of Studio 690:
Floorstanding loudspeakerGrille4 Spike feet4 Washers4 Locking-collars4 Foot-pads2 Jumper-straps (pre-installed)Owners ManualWarranty Card
What's in the Box of JBL Studio 6 Architectural 6IW?
Here are the items that come with the Studio 6 Architectural 6IW:
In-wall loudspeakerGrilleCut-Out TemplateQuick Start Guide