In this review, we will be comparing Oberon 7 and Oberon 9, two Passive Floor-standing speakers by DALI Let's have a brief look at the main features
of DALI Oberon 7 and DALI Oberon 9 first before getting into our more
detailed comparison.
Oberon 7 and Oberon 9 are members of DALI's Oberon series of speakers. Below you can find the loudspeakers from this series.
DALI Oberon Series History
What size room are the DALI Oberon 7 and DALI Oberon 9 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the DALI Oberon 7 and DALI Oberon 9 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Oberon 7 is a 2-way design whereas the Oberon 9 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Driver |
DALI Oberon 7 |
DALI Oberon 9 |
Driver Setup
|
2-way
|
3-way
|
Tweeter
|
1.125-inch
|
1.125-inch
|
Midrange
|
- |
1 x 7-inch |
Woofer
|
2 x 7-inch
|
2 x 9-inch
|
Oberon 7 features a 1.125" Soft-Dome Tweeter and 2 x 7" Wood Fiber Woofer with a Crossover frequency at 2300Hz. On the other hand, the Oberon 9 features a 1.125" Soft-Dome Tweeter , a 7" Midrange and 2 x 9" Wood Fiber Woofer with a Crossover frequency at 780Hz and 3400Hz.
Frequency Response
Oberon 7 has a frequency range of 36-26k Hz whereas Oberon 9 has a frequency range of 35-26k Hz. With a minimum frequency of 35Hz, the Oberon 9 can go slightly deeper then the Oberon 7's min frequency of 36Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Oberon 7 is a 6 ohms speaker compared to the Oberon 9 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Oberon 9 can provide this impedance level.
These two speakers also have different sensitivity levels. Oberon 7 sensitivity is rated at 88.5 dB and the Oberon 9's is rated at 90.5 dB. This 2 dB difference makes the DALI Oberon 9 a more sensitive speaker compared to DALI Oberon 7, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Oberon 7 can handle a max power of 400 watts RMS from the amp the whereas Oberon 7 has a max power handling value of 180 watts RMS , 220 watts less than the Oberon 9.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Oberon 7 features Post type posts and Oberon 9 has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
DALI Oberon 7's Post terminals
DALI Oberon 9's Post terminals
Cabinet Type and Port Position
Both Oberon 7 and Oberon 9 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare DALI Oberon 7's and DALI Oberon 9's external dimensions. DALI Oberon 7 has external dimensions of 1016.0 x 200.0 x 329.0mm ( 40 x 7-7/8 x 12-15/16inch) whereas DALI Oberon 9 has external dimensions of 1172.0 x 260.0 x 407.0mm ( 46-1/8 x 10-1/4 x 16inch) .
DALI Oberon 9 is clearly the larger of the two speakers. Its body is 60mm wider, 156mm taller and 78mm deeper than DALI Oberon 7.
Below you can see the front view size comparison of DALI Oberon 7 and DALI Oberon 9 in scale.
Comparison image of DALI Oberon 7 and DALI Oberon 9 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the DALI Oberon 7 is approximately 658.0cm2 / 102.0inch2 and base area of the DALI Oberon 9 is approximately 1058.2cm2 / 164.0inch2. The Oberon 7 requires 38% less surface area than the Oberon 9 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The DALI Oberon 7 weighs 14.80kg / 32.6lbs and the DALI Oberon 9 weighs 37.10kg / 81.6lbs. This makes the Oberon 9 151% heavier than the Oberon 7.
Here is a comparison of how Oberon 7 and Oberon 9's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of DALI Oberon 7?
Here are the items that are included inside the box of Oberon 7:
Floorstanding loudspeakerGrille4 Rubber feet4 Spike-feet4 Hex-nutsManual
What's in the Box of DALI Oberon 9?
Here are the items that come with the Oberon 9:
Floorstanding loudspeakerGrille4 Rubber feet4 Spike-feet4 Hex-nutsManua
Nominal Impedance |
6 ohms
vs
4 ohms
|
Less selective with amplifiers |
Height |
1016mm
vs
1172mm
|
Easier to fit in smaller spaces |
Base Surface Area |
658cm2 (200x329mm)
vs
1058cm2 (260x407mm)
|
Takes less floor space |
Price per pair* |
1700USD
vs
2500USD
|
costs less (*prices may change depending on the seller, location and time) |
Max Input Power |
400 watts
vs
180 watts
|
Handle more power from your amplifier |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Sensitivity |
91 dB
vs
89 dB
|
Play louder with same amount of amplification power |
Woofer Size |
9 inches
vs
7 inches
|
Larger woofer |
Low Frequency Response |
35 Hz
vs
36 Hz
|
Generates deeper bass |
General |
DALI Oberon 7 |
DALI Oberon 9 |
Brand |
DALI |
DALI |
Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
Power Range |
30-180 watts |
50-400 watts |
Sensitivity |
88.5 dB |
90.5 dB |
Impedance |
6 ohms |
4 ohms |
Frequency Response |
36-26k Hz |
35-26k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
2 |
Woofer Size |
7" |
9" |
Woofer Composition |
Wood Fiber |
Wood Fiber |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1.125" |
1.125" |
Tweeter Type |
Soft-Dome |
Soft-Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
7" |
Crossover Frequency |
2300Hz |
780Hz and 3400Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
1016.0mm (40") |
1172.0mm (46.1") |
Width |
200.0mm (7.9") |
260.0mm (10.2") |
Depth |
329.0mm (13") |
407.0mm (16") |
Weight |
14.80kg (32.6lbs) |
37.10kg (81.6lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood-grain vinyl |
MDF/Wood-grain vinyl |
Available Colors |
Black Ash, Light Oak, Dark Walnut, White |
Black Ash, Light Oak, Dark Walnut, White |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |