In this review, we will be comparing TSi400 and R-625FA, two Passive Floor-standing speakers from Polk Audio and Klipsch.
Let's have a brief look at the main features
of Polk TSi400 and Klipsch R-625FA first before getting into our more
detailed comparison.
Polk TSi400 Key Specs
- 2-way Design
- 1" Tweeter
- 3 x 5.25" Organic Fiber Woofer
- 44-24k Hz Frequency Response
- 91 dB Sensitivity
- Impedance: 8ohms
- Power Range:20-200watts
- Weight:14.55kg
- Dimensions (H x W x D): 985.0" x 8-3/16" x 14-1/2"( 985.0 x 208.0 x 369.0mm )
Klipsch R-625FA Key Specs
- 2-way Design
- 1" Tweeter
- 2 x 6.5" Copper-spun IMG Woofer
- 38-21k Hz Frequency Response
- 96 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 100watts
- Weight:22.20kg
- Dimensions (H x W x D): 1021.0" x 9-3/8" x 16-3/4"( 1021.0 x 239.0 x 426.0mm )
What size room are the Polk TSi400 and Klipsch R-625FA speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Polk TSi400 |
Klipsch R-625FA |
| Near-field |
Bad |
Poor |
| Small Room |
Poor |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Good |
Poor |
| Very Large Room |
Poor |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Polk TSi400 and Klipsch R-625FA compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both TSi400 and R-625FA are 2-way speakers.
| Driver |
Polk TSi400 |
Klipsch R-625FA |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
3 x 5.25-inch
|
2 x 6.5-inch
|
TSi400 features a 1" Tweeter and 3 x 5.25" Organic Fiber Woofer . On the other hand, the R-625FA features a 1" Tweeter and 2 x 6.5" Copper-spun IMG Woofer with a Crossover frequency at 2000Hz.
Frequency Response
TSi400 has a frequency range of 44-24k Hz whereas R-625FA has a frequency range of 38-21k Hz. With a minimum frequency of 38Hz, the R-625FA can go significantly deeper on the low side and provide stronger bass compared to the TSi400's min frequency of 44Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
TSi400 and R-625FA have the same Impedance of 8 ohms but where they differ is the sensitivity levels. TSi400 sensitivity is rated at 91 dB and the R-625FA's is at 96 dB. This 5 dB difference makes the Klipsch R-625FA a more sensitive speaker compared to Polk TSi400, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
TSi400 can handle a max power of 200 watts RMS from the amp the whereas R-625FA has a max power handling value of 100 watts RMS, 100 watts less than the TSi400.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
TSi400 features 5-way post posts which make bi-amping or bi-wiring possible. R-625FA has a Post which doesn't feature bi-amping/bi-wiring.
Klipsch R-625FA's Post terminals
Cabinet Type and Port Position
TSi400 has a bottom firing port whereas R-625FA has a rear firing ports. Polk TSi400's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch R-625FA with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk TSi400's and Klipsch R-625FA's external dimensions. Polk TSi400 has external dimensions of 985.0 x 208.0 x 369.0mm ( 38-3/4 x 8-3/16 x 14-1/2inch) whereas Klipsch R-625FA has external dimensions of 1021.0 x 239.0 x 426.0mm ( 40-3/16 x 9-3/8 x 16-3/4inch) .
Klipsch R-625FA is clearly the larger of the two speakers. Its body is 31mm wider, 36mm taller and 57mm deeper than Polk TSi400.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk TSi400 is approximately 767.5cm2 / 119.0inch2 and base area of the Klipsch R-625FA is approximately 1018.1cm2 / 157.8inch2. The TSi400 requires 25% less surface area than the R-625FA which gives it a small advantage on placement in tight spaces.