In this review, we will be comparing TSi300 and RP-8000F, two Passive Floor-standing speakers from Polk Audio and Klipsch. Let's have a brief look at the main features
of Polk TSi300 and Klipsch RP-8000F first before getting into our more
detailed comparison.
What size room are the Polk TSi300 and Klipsch RP-8000F speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk TSi300 and Klipsch RP-8000F compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both TSi300 and RP-8000F are 2-way speakers.
Driver |
Polk TSi300 |
Klipsch RP-8000F |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
2 x 5.25-inch
|
2 x 8-inch
|
TSi300 features a 1" Tweeter and 2 x 5.25" Organic Fiber Woofer . On the other hand, the RP-8000F features a 1" Tractrix Horn Tweeter and 2 x 8" Cerametallic Woofer .
Frequency Response
TSi300 has a frequency range of 47-24k Hz whereas RP-8000F has a frequency range of 32-25k Hz. With a minimum frequency of 32Hz, the RP-8000F can go significantly deeper on the low side and provide stronger bass compared to the TSi300's min frequency of 47Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
TSi300 and RP-8000F have the same Impedance of 8 ohms but where they differ is the sensitivity levels. TSi300 sensitivity is rated at 90 dB and the RP-8000F's is at 98 dB. This 8 dB difference makes the Klipsch RP-8000F a more sensitive speaker compared to Polk TSi300, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both TSi300 and RP-8000F features dual binding post speaker terminals for bi-amping or bi-wiring.
Cabinet Type and Port Position
TSi300 has a bottom firing port whereas RP-8000F has a rear firing ports. Polk TSi300's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch RP-8000F with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk TSi300's and Klipsch RP-8000F's external dimensions. Polk TSi300 has external dimensions of 921.0 x 208.0 x 299.0mm ( 36-1/4 x 8-3/16 x 11-3/4inch) whereas Klipsch RP-8000F has external dimensions of 1099.0 x 277.0 x 445.0mm ( 43-1/4 x 10-7/8 x 17-1/2inch) .
Klipsch RP-8000F is clearly the larger of the two speakers. Its body is 69mm wider, 178mm taller and 146mm deeper than Polk TSi300.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk TSi300 is approximately 621.9cm2 / 96.4inch2 and base area of the Klipsch RP-8000F is approximately 1232.7cm2 / 191.1inch2. The TSi300 requires 50% less surface area than the RP-8000F which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk TSi300 weighs 11.82kg / 26lbs and the Klipsch RP-8000F weighs 27.27kg / 60lbs. This makes the RP-8000F 131% heavier than the TSi300.
Here is a comparison of how TSi300 and RP-8000F's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Polk TSi300?
Here are the items that are included inside the box of TSi300:
Tower speakerDetachable cloth grille (installed)Owners ManualWall-Mount templateOnline registration sheetPolk Audio product brochure
What's in the Box of Klipsch RP-8000F?
Here are the items that come with the RP-8000F:
Floorstanding loudspeakerStabilizer feet (installed)Grille (installed)2 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information
Height |
921mm
vs
1099mm
|
Easier to fit in smaller spaces |
Base Surface Area |
621cm2 (208x299mm)
vs
1232cm2 (277x445mm)
|
Takes less floor space |
Price per pair* |
358USD
vs
1658USD
|
costs less (*prices may change depending on the seller, location and time) |
Sensitivity |
98 dB
vs
90 dB
|
Play louder with same amount of amplification power |
Woofer Size |
8 inches
vs
5.25 inches
|
Larger woofer |
Low Frequency Response |
32 Hz
vs
47 Hz
|
Generates deeper bass |
High Frequency Response |
25k Hz
vs
24k Hz
|
Generates higher frequency |
General |
Polk Audio TSi300 |
Klipsch Reference Premiere RP-8000F |
Brand |
Polk Audio |
Klipsch |
Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
Power Range |
20-150 watts |
up to 150 watts |
Sensitivity |
90 dB |
98 dB |
Impedance |
8 ohms |
8 ohms |
Frequency Response |
47-24k Hz |
32-25k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
2 |
Woofer Size |
5.25" |
8" |
Woofer Composition |
Organic Fiber |
Cerametallic |
Woofer Surround Material |
Butyl Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
n/a |
Tractrix Horn |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Firing Direction |
bottom |
rear |
Physical Specs |
|
|
Height |
921.0mm (36.3") |
1099.0mm (43.3") |
Width |
208.0mm (8.2") |
277.0mm (10.9") |
Depth |
299.0mm (11.8") |
445.0mm (17.5") |
Weight |
11.82kg (26lbs) |
27.27kg (60lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
Wood-grain vinyl |
MDF/Wood-grain vinyl |
Available Colors |
Black |
Walnut, Black |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |