In this review, we will be comparing RP-6000F and R-625FA, two Passive Floor-standing speakers by Klipsch Let's have a brief look at the main features
of Klipsch RP-6000F and Klipsch R-625FA first before getting into our more
detailed comparison.
What size room are the Klipsch RP-6000F and Klipsch R-625FA speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-6000F and Klipsch R-625FA compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-6000F and R-625FA are 2-way speakers.
| Driver |
Klipsch RP-6000F |
Klipsch R-625FA |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6.5-inch
|
2 x 6.5-inch
|
RP-6000F features a 1" Tractrix Horn Tweeter and 2 x 6.5" Cerametallic Woofer . On the other hand, the R-625FA features a 1" Tweeter and 2 x 6.5" Copper-spun IMG Woofer with a Crossover frequency at 2000Hz.
Frequency Response
RP-6000F has a frequency range of 34-25k Hz whereas R-625FA has a frequency range of 38-21k Hz. With a minimum frequency of 34Hz, the RP-6000F can go slightly deeper then the R-625FA's min frequency of 38Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-6000F and R-625FA have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-6000F sensitivity is rated at 97 dB and the R-625FA's is at 96 dB. This 1 dB difference makes the Klipsch RP-6000F a more sensitive speaker compared to Klipsch R-625FA, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RP-6000F can handle a max power of 125 watts RMS from the amp the whereas R-625FA has a max power handling value of 100 watts RMS, 25 watts less than the RP-6000F.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-6000F features Post posts which make bi-amping or bi-wiring possible. R-625FA has a Post which doesn't feature bi-amping/bi-wiring.
Klipsch RP-6000F's Post terminals allows Bi-amping or bi-wiring
Klipsch R-625FA's Post terminals
Cabinet Type and Port Position
Both RP-6000F and R-625FA have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-6000F's and Klipsch R-625FA's external dimensions. Klipsch RP-6000F has external dimensions of 1010.0 x 237.0 x 432.0mm ( 39-3/4 x 9-5/16 x 17inch) whereas Klipsch R-625FA has external dimensions of 1021.0 x 239.0 x 426.0mm ( 40-3/16 x 9-3/8 x 16-3/4inch) .
Klipsch RP-6000F is 2mm narrower and 11mm shorter than Klipsch R-625FA but it is also 6mm deeper.
Below you can see the front view size comparison of Klipsch RP-6000F and Klipsch R-625FA in scale.
Comparison image of Klipsch RP-6000F and Klipsch R-625FA Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-6000F is approximately 1023.8cm2 / 158.7inch2 and base area of the Klipsch R-625FA is approximately 1018.1cm2 / 157.8inch2. The RP-6000F requires 1% more surface area than the R-625FA which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch RP-6000F weighs 22.27kg / 49lbs and the Klipsch R-625FA weighs 22.20kg / 48.8lbs. This makes the RP-6000F 0% heavier than the R-625FA.
Here is a comparison of how RP-6000F and R-625FA's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Klipsch RP-6000F?
Here are the items that are included inside the box of RP-6000F:
Floorstanding loudspeakerStabilizer feet (installed)Grille (installed)2 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information
What's in the Box of Klipsch R-625FA?
Here are the items that come with the R-625FA:
Floorstanding loudspeaker2 Grilles (installed)2 Feet4 ScrewsQuick Setup GuideImportant Safety InstructionsWarranty InformationLoudspeaker Feet note
 Max Input Power |
125 watts
vs
100 watts
|
Handle more power from your amplifier |
 Sensitivity |
97 dB
vs
96 dB
|
Play louder with same amount of amplification power |
 Low Frequency Response |
34 Hz
vs
38 Hz
|
Generates deeper bass |
 High Frequency Response |
25k Hz
vs
21k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
1010mm
vs
1021mm
|
Easier to fit in smaller spaces |
 Price per pair* |
1378USD
vs
1658USD
|
costs less (*prices may change depending on the seller, location and time) |
 Dolby Atmos Drivers |
Built-in 1 x 5.25
vs
No
|
Dolby Atmos Compatibility |
 Base Surface Area |
1018cm2 (239x426mm)
vs
1023cm2 (237x432mm)
|
Takes less floor space |
| General |
Klipsch Reference Premiere RP-6000F |
Klipsch Reference R-625FA |
| Brand |
Klipsch |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 125 watts |
up to 100 watts |
| Sensitivity |
97 dB |
96 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
34-25k Hz |
38-21k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Cerametallic |
Copper-spun IMG |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Tractrix Horn |
n/a |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
2000Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
1010.0mm (39.8") |
1021.0mm (40.2") |
| Width |
237.0mm (9.3") |
239.0mm (9.4") |
| Depth |
432.0mm (17") |
426.0mm (16.8") |
| Weight |
22.27kg (49lbs) |
22.20kg (48.8lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Walnut, Black |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |