In this review, we will be comparing RP-404C II and HTM6 S2, two Passive Center Channel speakers from Klipsch and Bowers Wilkins.
Let's have a brief look at the main features
of Klipsch RP-404C II and BW HTM6 S2 first before getting into our more
detailed comparison.
Klipsch RP-404C II Key Specs
- 2-way Design
- 1" Tractrix Horn Tweeter
- 4 x 4" Cerametallic cone Woofer
- 87-25k Hz Frequency Response
- 94 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 125watts
- Weight:9.20kg
- Dimensions (H x W x D): 147.0" x 26-7/8" x 6-1/2"( 147.0 x 683.0 x 166.0mm )
BW HTM6 S2 Key Specs
- 2-way Design
- 1" Decoupled Double Dome Tweeter
- 2 x 5" Continuum Woofer
- 72-28k Hz Frequency Response
- 87 dB Sensitivity
- Impedance: 8ohms
- Power Range:30-120watts
- Weight:7.82kg
- Dimensions (H x W x D): 162.0" x 18-15/16" x 11-1/16"( 162.0 x 482.0 x 281.0mm )
What size room are the Klipsch RP-404C II and BW HTM6 S2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Klipsch RP-404C II |
BW HTM6 S2 |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-404C II and BW HTM6 S2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-404C II and HTM6 S2 are 2-way speakers.
| Driver |
Klipsch RP-404C II |
BW HTM6 S2 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
4 x 4-inch
|
2 x 5-inch
|
RP-404C II features a 1" titanium Tractrix Horn Tweeter and 4 x 4" Cerametallic cone Woofer with a Crossover frequency at 1900 Hz. On the other hand, the HTM6 S2 features a 1" Decoupled Double Dome Tweeter and 2 x 5" Continuum Woofer .
Frequency Response
RP-404C II has a frequency range of 87-25k Hz whereas HTM6 S2 has a frequency range of 72-28k Hz. With a minimum frequency of 72Hz, the HTM6 S2 can go significantly deeper on the low side and provide stronger bass compared to the RP-404C II's min frequency of 87Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-404C II and HTM6 S2 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-404C II sensitivity is rated at 94 dB and the HTM6 S2's is at 87 dB. This 7 dB difference makes the Klipsch RP-404C II a more sensitive speaker compared to BW HTM6 S2 , hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
RP-404C II can handle a max power of 125 watts RMS from the amp the whereas HTM6 S2 has a max power handling value of 120 watts RMS, 5 watts less than the RP-404C II.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
HTM6 S2 features Binding post posts which make bi-amping or bi-wiring possible. RP-404C II has a Binding post which doesn't feature bi-amping/bi-wiring.
Klipsch RP-404C II's Binding post terminals
BW HTM6 S2 's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-404C II's and BW HTM6 S2 's external dimensions. Klipsch RP-404C II has external dimensions of 147.0 x 683.0 x 166.0mm ( 5-3/4 x 26-7/8 x 6-1/2inch) whereas BW HTM6 S2 has external dimensions of 162.0 x 482.0 x 281.0mm ( 6-3/8 x 18-15/16 x 11-1/16inch) .
Klipsch RP-404C II is 15mm shorter and 115mm less deeper than BW HTM6 S2 but it is also 201mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-404C II is approximately 1133.8cm2 / 175.7inch2 and base area of the BW HTM6 S2 is approximately 1354.4cm2 / 209.9inch2. The RP-404C II requires 16% less surface area than the HTM6 S2 which gives it a small advantage on placement in tight spaces.