In this review, we will be comparing C 95 II and RP-5000F, two Passive Floor-standing speakers from Jamo and Klipsch. Let's have a brief look at the main features
of Jamo C 95 II and Klipsch RP-5000F first before getting into our more
detailed comparison.
What size room are the Jamo C 95 II and Klipsch RP-5000F speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Jamo C 95 II and Klipsch RP-5000F compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both C 95 II and RP-5000F are 2-way speakers.
| Driver |
Jamo C 95 II |
Klipsch RP-5000F |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6-inch
|
2 x 5.25-inch
|
C 95 II features a 1" Tweeter and 2 x 6" Composite Woofer . On the other hand, the RP-5000F features a 1" Tractrix Horn Tweeter and 2 x 5.25" Cerametallic Woofer .
Frequency Response
C 95 II has a frequency range of 37-24k Hz whereas RP-5000F has a frequency range of 35-25k Hz. With a minimum frequency of 35Hz, the RP-5000F can go slightly deeper then the C 95 II's min frequency of 37Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
C 95 II is a 6 ohms speaker compared to the RP-5000F which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. C 95 II sensitivity is rated at 89 dB and the RP-5000F's is rated at 96 dB. This 7 dB difference makes the Klipsch RP-5000F a more sensitive speaker compared to Jamo C 95 II, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
C 95 II can handle a max power of 165 watts RMS from the amp the whereas RP-5000F has a max power handling value of 125 watts RMS, 40 watts less than the C 95 II.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both C 95 II and RP-5000F features dual binding post speaker terminals for bi-amping or bi-wiring.
Jamo C 95 II's Posts terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both C 95 II and RP-5000F have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Jamo C 95 II's and Klipsch RP-5000F's external dimensions. Jamo C 95 II has external dimensions of 982.0 x 247.0 x 383.0mm ( 38-5/8 x 9-11/16 x 15-1/16inch) whereas Klipsch RP-5000F has external dimensions of 920.0 x 207.0 x 364.0mm ( 36-3/16 x 8-1/8 x 14-5/16inch) .
Jamo C 95 II is clearly the larger of the two speakers. Its body is 40mm wider, 62mm taller and 19mm deeper than Klipsch RP-5000F.
Below you can see the front view size comparison of Jamo C 95 II and Klipsch RP-5000F in scale.
Comparison image of Jamo C 95 II and Klipsch RP-5000F Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Jamo C 95 II is approximately 946.0cm2 / 146.6inch2 and base area of the Klipsch RP-5000F is approximately 753.5cm2 / 116.8inch2. The C 95 II requires 26% more surface area than the RP-5000F which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Jamo C 95 II weighs 19.91kg / 43.8lbs and the Klipsch RP-5000F weighs 16.36kg / 36lbs. This makes the C 95 II 22% heavier than the RP-5000F.
Here is a comparison of how C 95 II and RP-5000F's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Jamo C 95 II?
Here are the items that are included inside the box of C 95 II:
Floorstanding loudspeakerGrille4 Outrigger feet4 Spikes (pre-installed on outrigger feet)4 Rubber feet8 Machine screws2 Jumper-straps (pre-installed)Hex-keyUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of Klipsch RP-5000F?
Here are the items that come with the RP-5000F:
Floorstanding loudspeakerStabilizer feet (installed)Grille (installed)2 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information
 Max Input Power |
165 watts
vs
125 watts
|
Handle more power from your amplifier |
 Woofer Size |
6 inches
vs
5.25 inches
|
Larger woofer |
 Price per pair* |
918USD
vs
1038USD
|
costs less (*prices may change depending on the seller, location and time) |
 Sensitivity |
96 dB
vs
89 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
| Low Frequency Response |
35 Hz
vs
37 Hz
|
Generates deeper bass |
 High Frequency Response |
25k Hz
vs
24k Hz
|
Generates higher frequency |
 Height |
920mm
vs
982mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
753cm2 (207x364mm)
vs
946cm2 (247x383mm)
|
Takes less floor space |
| General |
Jamo Concert 9 Series C 95 II |
Klipsch Reference Premiere RP-5000F |
| Brand |
Jamo |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
50-165 watts |
up to 125 watts |
| Sensitivity |
89 dB |
96 dB |
| Impedance |
6 ohms |
8 ohms |
| Frequency Response |
37-24k Hz |
35-25k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6" |
5.25" |
| Woofer Composition |
Composite |
Cerametallic |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
n/a |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
982.0mm (38.7") |
920.0mm (36.2") |
| Width |
247.0mm (9.7") |
207.0mm (8.1") |
| Depth |
383.0mm (15.1") |
364.0mm (14.3") |
| Weight |
19.91kg (43.8lbs) |
16.36kg (36lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
Walnut, Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |