In this review, we will be comparing Prime Wireless Pro and Active 200, two Powered Bookshelf speakers from SVS and Q Acoustics. Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them.
Let's have a brief look at the main features
of SVS Prime Wireless Pro and Q Acoustics Q Active 200 first before getting into our more
detailed comparison.
SVS Prime Wireless Pro Key Specs
- 2-way Design
- 200-watt RMS Integrated Amplifier
- 1" Dome Tweeter
- 5.25" Polypropylen cone Woofer
- 42-25k Hz Frequency Response
- 24-bit Max Depth / 192 kHz Max Sample Rate
- Built-in 5.0 Bluetooth
- App Control Feature
- Weight:5.30kg
- Dimensions (H x W x D): 295.0" x 7.09" x 8.96"( 295 x 180 x 228mm )
Q Acoustics Q Active 200 Key Specs
- 2-way Design
- 100-watt RMS( 280-watt Peak) Integrated Amplifier
- " Tweeter
- 2-1/4" Midrange
- 4.5" Woofer
- 2-1/4" Midrange
- 46-20k Hz Frequency Response
- 24-bit Max Depth / 96 kHz Max Sample Rate
- Built-in 4.1 Bluetooth
- App Control Feature
- Weight:7.50kg
- Dimensions (H x W x D): 285.0" x 6-3/4" x 11-7/16"( 285.0 x 172.0 x 291.0mm )
In the following sections, we will get into more detail in order to better understand how the SVS Prime Wireless Pro and Q Acoustics Q Active 200 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Prime Wireless Pro and Active 200 are 2-way speakers.
| Driver |
SVS Prime Wireless Pro |
Q Acoustics Q Active 200 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
-inch
|
|
Midrange
|
- |
2 x 2-1/4-inch |
|
Woofer
|
1 x 5.25-inch
|
1 x 4.5-inch
|
Prime Wireless Pro features a 1" aluminum Dome Tweeter and 1 x 5.25" Polypropylen cone Woofer with a Crossover frequency at 2000Hz. On the other hand, the Active 200 features a " Tweeter , a 2-1/4" Midrange and 1 x 4.5" Woofer .
Frequency Response
Prime Wireless Pro has a frequency range of 42-25k Hz whereas Active 200 has a frequency range of 46-20k Hz. With a minimum frequency of 42Hz, the Prime Wireless Pro can go slightly deeper then the Active 200's min frequency of 46Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Cabinet Type and Port Position
Both Prime Wireless Pro and Active 200 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS Prime Wireless Pro's and Q Acoustics Q Active 200's external dimensions. SVS Prime Wireless Pro has external dimensions of 295 x 180 x 228mm ( 11.61 x 7.09 x 8.96 inch) whereas Q Acoustics Q Active 200 has external dimensions of 285.0 x 172.0 x 291.0mm ( 11-3/16 x 6-3/4 x 11-7/16inch) .
Q Acoustics Q Active 200 is 8mm narrower and 10mm shorter than SVS Prime Wireless Pro but it is also 63mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS Prime Wireless Pro is approximately 414.0cm2 / 64.2inch2 and base area of the Q Acoustics Q Active 200 is approximately 500.5cm2 / 77.6inch2. The Prime Wireless Pro requires 17% less surface area than the Active 200 which gives it a small advantage on placement in tight spaces.