SpeakerDecision
  • SPEAKERS by TYPE
    • Passive Bookshelf Speakers
    • Passive Floor-standing Speakers
    • Passive Center Channel Speakers
    • Passive In-wall Speakers
    • All Passive Speakers
    • Powered Subwoofers
    • Powered Stereo Speakers
  • AMPLIFIERS
  • SMART FIND

Polk R700 vs Klipsch RP-6000F Comparison

x
Speaker to replace
Change

Polk R700

Passive Floor-standing | 38-38k Hz

Polk Audio Reserve R700
CHECK PRICE
Change
    
Klipsch RP-6000F

Passive Floor-standing | 34-25k Hz

Klipsch Reference Premiere RP-6000F
CHECK PRICE
Polk R700 Polk R700
See at AMAZON
Klipsch RP-6000F Klipsch RP-6000F
See at AMAZON
Polk R700
See at AMAZON
Klipsch RP-6000F
See at AMAZON
Polk R700 vs Klipsch RP-6000F Speaker Comparison

In this review, we will be comparing R700 and RP-6000F, two Passive Floor-standing speakers from Polk Audio and Klipsch.

Let's have a brief look at the main features of Polk R700 and Klipsch RP-6000F first before getting into our more detailed comparison.

Polk R700 Key Specs

  • 3-way Design
  • 1" Pinnacle Ring Radiator Tweeter
  • 6.5" Midrange
  • 2 x 8" Polypropylene Woofer
  • 38-38k Hz Frequency Response
  • 88 dB Sensitivity
  • Impedance: 8ohms
  • Power Range:50-300watts
  • Weight:35.90kg
  • Dimensions (H x W x D): 1143.8" x 12.6" x 16.9"( 1143.8 x 320.7 x 428.3mm )

Klipsch RP-6000F Key Specs

  • 2-way Design
  • 1" Tractrix Horn Tweeter
  • 2 x 6.5" Cerametallic Woofer
  • 34-25k Hz Frequency Response
  • 97 dB Sensitivity
  • Impedance: 8ohms
  • Power Range:up to 125watts
  • Weight:22.27kg
  • Dimensions (H x W x D): 1010.0" x 9-5/16" x 17"( 1010.0 x 237.0 x 432.0mm )

What size room are the Polk R700 and Klipsch RP-6000F speakers good for?

The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:

Listening Environment* Polk R700 Klipsch RP-6000F
Near-field Bad Bad
Small Room Poor Poor
Mid-size Room Average Good
Large Room Good Good
Very Large Room Average Poor

(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2. Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)

In the following sections, we will get into more detail in order to better understand how the Polk R700 and Klipsch RP-6000F compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.


**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.


Drivers

One of the fundamental differences between these two speakers is that R700 is a 3-way design whereas the RP-6000F is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.

Driver Polk R700 Klipsch RP-6000F
Driver Setup 3-way 2-way
Tweeter 1-inch 1-inch
Midrange 1 x 6.5-inch -
Woofer 2 x 8-inch 2 x 6.5-inch

R700 features a 1" Pinnacle Ring Radiator Tweeter , a 6.5" Midrange and 2 x 8" Polypropylene Woofer with a Crossover frequency at 350Hz and 2700Hz. On the other hand, the RP-6000F features a 1" Tractrix Horn Tweeter and 2 x 6.5" Cerametallic Woofer .

Frequency Response

R700 has a frequency range of 38-38k Hz whereas RP-6000F has a frequency range of 34-25k Hz. With a minimum frequency of 34Hz, the RP-6000F can go slightly deeper then the R700's min frequency of 38Hz.

Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.

Low Frequency

Floor-standing Speakers

R700
RP-6000F
Min
Average
Max
High Frequency

Floor-standing Speakers

Polk R700
Klipsch RP-6000F
Min
Average
Max

None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.

Impedance and Sensitivity

R700 and RP-6000F have the same Impedance of 8 ohms but where they differ is the sensitivity levels. R700 sensitivity is rated at 88 dB and the RP-6000F's is at 97 dB. This 9 dB difference makes the Klipsch RP-6000F a more sensitive speaker compared to Polk R700, hence will play louder with the same amount of watts.

Sensitivity

Floor-standing Speakers

R700
RP-6000F
Min
Average
Max

Power Range

Power range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.

R700 can handle a max power of 300 watts RMS from the amp the whereas RP-6000F has a max power handling value of 125 watts RMS, 175 watts less than the R700.

Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters such as Impedance, sensitivity and system efficiencies.

Input Type and Bi-Amping / Bi-Wiring

Both R700 and RP-6000F features dual binding post speaker terminals for bi-amping or bi-wiring.

Polk R700 Terminals
Polk R700's Post terminals allows Bi-amping or bi-wiring

Klipsch RP-6000FPost Terminals
Klipsch RP-6000F's Post terminals allows Bi-amping or bi-wiring

Cabinet Type and Port Position

R700 has a bottom firing port whereas RP-6000F has a rear firing ports. Polk R700's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch RP-6000F with its rear-firing port.

Polk R700  Port
Polk R700 Port

Physical Specs

Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk R700's and Klipsch RP-6000F's external dimensions. Polk R700 has external dimensions of 1143.8 x 320.7 x 428.3mm ( 45 x 12.6 x 16.9inch) whereas Klipsch RP-6000F has external dimensions of 1010.0 x 237.0 x 432.0mm ( 39-3/4 x 9-5/16 x 17inch) .

Klipsch RP-6000F is 83.7mm narrower and 133.8mm shorter than Polk R700 but it is also 3.7mm deeper.

Below you can see the front view size comparison of Polk R700 and Klipsch RP-6000F in scale.

Polk R700 vs Klipsch RP-6000F Size Comparison - Front View
Comparison image of Polk R700 and Klipsch RP-6000F Size and External Dimensions

Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited. The base surface area of the Polk R700 is approximately 1373.6cm2 / 212.9inch2 and base area of the Klipsch RP-6000F is approximately 1023.8cm2 / 158.7inch2. The R700 requires 34% more surface area than the RP-6000F which gives it a small disadvantage on placement in tight spaces.

Weight Comparison

The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk R700 weighs 35.90kg / 79lbs and the Klipsch RP-6000F weighs 22.27kg / 49lbs. This makes the R700 61% heavier than the RP-6000F.

Here is a comparison of how R700 and RP-6000F's weights compare with the average, max and min weights in Passive Floor-standing class.

Weight
All Floor-standing Speakers
Polk R700
Klipsch RP-6000F
Min
Average
Max

What's in the Box of Polk R700?

Here are the items that are included inside the box of R700:
  • Floorstanding loudspeaker
  • 4 Outrigger feet (pre-installed)
  • 4 Rubber feet (pre-installed)
  • 4 Spike feet (pre-installed)
  • Grille
  • Hex-key
  • Owner's Manual
  • Online Registration
  • What's in the Box of Klipsch RP-6000F?

    Here are the items that come with the RP-6000F:
  • Floorstanding loudspeaker
  • Stabilizer feet (installed)
  • Grille (installed)
  • 2 Terminal jumpers (installed)
  • User Manual
  • Important Safety Instructions
  • Warranty Information

  • Reasons to choose Polk Audio Reserve R700 over Klipsch Reference Premiere RP-6000F
    Max Input Power 300 watts vs 125 watts Handle more power from your amplifier
    Driver Setup 3-way vs 2-way Have a dedicated mid-range driver
    Woofer Size 8 inches vs 6.5 inches Larger woofer
    High Frequency Response 38k Hz vs 25k Hz Generates higher frequency

    Reasons to choose Klipsch Reference Premiere RP-6000F over Polk Audio Reserve R700

    Sensitivity 97 dB vs 88 dB Play louder with same amount of amplification power
    Low Frequency Response 34 Hz vs 38 Hz Generates deeper bass
    Height 1010mm vs 1143mm Easier to fit in smaller spaces
    Base Surface Area 1023cm2 vs 1373cm2 Takes less floor space
    Price per pair* 1378USD vs 2198USD costs less (*prices may change depending on the seller, location and time)
    Polk R700 vs Klipsch RP-6000F Specs Table
    Detailed comparison of specifications
    General Polk Audio Reserve R700 Klipsch Reference Premiere RP-6000F
    Brand Polk Audio Klipsch
    Speaker Type Floor-standing speaker Floor-standing speaker
    Power Range 50-300 watts up to 125 watts
    Sensitivity 88 dB 97 dB
    Impedance 8 ohms 8 ohms
    Impedance 3.6 ohms n/a
    Frequency Response 38-38k Hz 34-25k Hz
    Drivers
    Woofer Quantity 2 2
    Woofer Size 8" 6.5"
    Woofer Composition Polypropylene Cerametallic
    Woofer Surround Material Rubber Rubber
    Tweeter Size 1" 1"
    Tweeter Type Pinnacle Ring Radiator Tractrix Horn
    Aimable Tweeter No No
    Midrange Driver 6.5" No
    Crossover Frequency 350Hz and 2700Hz n/a
    Firing Direction bottom rear
    Physical Specs
    Height 1143.8mm (45") 1010.0mm (39.8")
    Width 320.7mm (12.6") 237.0mm (9.3")
    Depth 428.3mm (16.9") 432.0mm (17")
    Weight 35.90kg (79lbs) 22.27kg (49lbs)
    Enclosure Bass Reflex Bass Reflex
    Finish MDF/Vinyl MDF/Wood-grain vinyl
    Available Colors Black, Walnut, White Walnut, Black
    Grille Yes Yes
    Moisture Resistancy No No
    Connections
    Biamp Inputs Yes Yes
    Other
    Parts Warranty 5 Years 5 Years
    Labor Warranty 5 Years 5 Years

    Most Popular Speakers
    Klipsch Reference R-51M
    Klipsch R-51M
    2-way | 93 dB | 8 ohms
    Wharfedale Elysian 2
    Wharfedale Elysian 2
    3-way | 89 dB | 4 ohms
    ELAC Debut 2.0 B6.2
    ELAC Debut 2.0 B6.2
    2-way | 87 dB | 6 ohms
    Bowers & Wilkins 606 S2 Anniversary Edition
    B&W 606 S2
    2-way | 88 dB | 8 ohms
    KEF Q150
    KEF Q150
    2-way | 86 dB | 8 ohms
    Klipsch Reference Premiere RP-500M
    Klipsch RP-500M
    2-way | 93 dB | 8 ohms
    Wharfedale EVO4.1
    Wharfedale EVO4.1
    2-way | 87 dB | 8 ohms
    Bowers & Wilkins 606
    B&W 606
    2-way | 88 dB | 8 ohms
    Copyright © 2025 by SpeakerDecision
    About Privacy Contact US Camera Decision

    Report a Correction