In this review, we will be comparing XT20 and R-41M, two Passive Bookshelf speakers from Polk Audio and Klipsch. Let's have a brief look at the main features
of Polk XT20 and Klipsch R-41M first before getting into our more
detailed comparison.
What size room are the Polk XT20 and Klipsch R-41M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk XT20 and Klipsch R-41M compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both XT20 and R-41M are 2-way speakers.
| Driver |
Polk XT20 |
Klipsch R-41M |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 4-inch
|
XT20 features a 1" Soft-Dome Tweeter and 1 x 6.5" Bi-laminate paper Woofer . On the other hand, the R-41M features a 1" Tractrix Horn Tweeter and 1 x 4" Copper-spun IMG Woofer with a Crossover frequency at 1730Hz.
Frequency Response
XT20 has a frequency range of 38-40k Hz whereas R-41M has a frequency range of 68-21k Hz. With a minimum frequency of 38Hz, the XT20 can go significantly deeper on the low side and provide stronger bass compared to the R-41M's min frequency of 68Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
XT20 and R-41M have the same Impedance of 8 ohms but where they differ is the sensitivity levels. XT20 sensitivity is rated at 87 dB and the R-41M's is at 90 dB. This 3 dB difference makes the Klipsch R-41M a more sensitive speaker compared to Polk XT20, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
XT20 can handle a max power of 200 watts RMS from the amp the whereas R-41M has a max power handling value of 50 watts RMS, 150 watts less than the XT20.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
XT20 features Single Gold Plated Binding Posts type posts and R-41M has a Single Gold Plated Binding Posts type posts. None of these speakers feature bi-amping/bi-wiring.
Klipsch R-41M's Single Gold Plated Binding Posts terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk XT20's and Klipsch R-41M's external dimensions. Polk XT20 has external dimensions of 332.0 x 193.0 x 281.0mm ( 13-1/16 x 7-9/16 x 11-1/16inch) whereas Klipsch R-41M has external dimensions of 287.0 x 146.0 x 200.0mm ( 11.2 x 5.7 x 7.8inch) .
Polk XT20 is clearly the larger of the two speakers. Its body is 47mm wider, 45mm taller and 81mm deeper than Klipsch R-41M.
Below you can see the front view size comparison of Polk XT20 and Klipsch R-41M in scale.
Comparison image of Polk XT20 and Klipsch R-41M Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk XT20 is approximately 542.3cm2 / 84.1inch2 and base area of the Klipsch R-41M is approximately 292.0cm2 / 45.3inch2. The XT20 requires 86% more surface area than the R-41M which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Polk XT20 and Klipsch R-41M on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk XT20 weighs 5.45kg / 12lbs and the Klipsch R-41M weighs 3.20kg / 7lbs. This makes the XT20 70% heavier than the R-41M.
Here is a comparison of how XT20 and R-41M's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk XT20?
Here are the items that are included inside the box of XT20:
2 Bookshelf loudspeakers2 Grilles (attached)8 Self-adhesive rubber feetOwners ManualOnline Product Registration
What's in the Box of Klipsch R-41M?
Here are the items that come with the R-41M:
2 Bookshelf loudspeakers 2 Grilles (installed) 8 Self-adhesive rubber feet Quick Setup Guide Important Safety Instructions Warranty Information
 Max Input Power |
200 watts
vs
50 watts
|
Handle more power from your amplifier |
 Woofer Size |
6.5 inches
vs
4 inches
|
Larger woofer |
| Low Frequency Response |
38 Hz
vs
68 Hz
|
Generates deeper bass |
 High Frequency Response |
40k Hz
vs
21k Hz
|
Generates higher frequency |
 Sensitivity |
90 dB
vs
87 dB
|
Play louder with same amount of amplification power |
 Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
 Height |
287mm
vs
332mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
292cm2 (146x200mm)
vs
542cm2 (193x281mm)
|
Takes less floor space |
 Price per pair* |
229USD
vs
299USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Polk Audio Monitor XT20 |
Klipsch Reference R-41M |
| Brand |
Polk Audio |
Klipsch |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
30-200 watts |
50 watts |
| Sensitivity |
87 dB |
90 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
38-40k Hz |
68-21k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
4" |
| Woofer Composition |
Bi-laminate paper |
Copper-spun IMG |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
1730Hz |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
332.0mm (13.1") |
287.0mm (11.3") |
| Width |
193.0mm (7.6") |
146.0mm (5.7") |
| Depth |
281.0mm (11.1") |
200.0mm (7.9") |
| Weight |
5.45kg (12lbs) |
3.20kg (7lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF, Vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
Black |
| Mounting Bracket |
No |
Keyhole |
| Recommended Stand Height |
24-28" |
26-31" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |