In this review, we will be comparing Silver 200 7G and R-625FA, two Passive Floor-standing speakers from Monitor Audio and Klipsch.
Let's have a brief look at the main features
of Monitor Audio Silver 200 7G and Klipsch R-625FA first before getting into our more
detailed comparison.
Monitor Audio Silver 200 7G Key Specs
- 2-way Design
- 1" gold dome C-CAM with uniform dispersion (UD) waveguide Tweeter
- 2 x 5.25" C-CAM RST II Woofer
- 34-35k Hz Frequency Response
- 87.5 dB Sensitivity
- Impedance: 8ohms
- Power Range:60-150watts
- Weight:13.77kg
- Dimensions (H x W x D): 920.0" x 9-15/16" x 13-1/16"( 920.0 x 253.0 x 332.0mm )
Klipsch R-625FA Key Specs
- 2-way Design
- 1" Tweeter
- 2 x 6.5" Copper-spun IMG Woofer
- 38-21k Hz Frequency Response
- 96 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 100watts
- Weight:22.20kg
- Dimensions (H x W x D): 1021.0" x 9-3/8" x 16-3/4"( 1021.0 x 239.0 x 426.0mm )
What size room are the Monitor Audio Silver 200 7G and Klipsch R-625FA speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Monitor Audio Silver 200 7G |
Klipsch R-625FA |
| Near-field |
Bad |
Poor |
| Small Room |
Poor |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Good |
Poor |
| Very Large Room |
Poor |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Silver 200 7G and Klipsch R-625FA compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Silver 200 7G and R-625FA are 2-way speakers.
| Driver |
Monitor Audio Silver 200 7G |
Klipsch R-625FA |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5.25-inch
|
2 x 6.5-inch
|
Silver 200 7G features a 1" gold dome C-CAM with uniform dispersion (UD) waveguide Tweeter and 2 x 5.25" C-CAM RST II Woofer . On the other hand, the R-625FA features a 1" Tweeter and 2 x 6.5" Copper-spun IMG Woofer with a Crossover frequency at 2000Hz.
Frequency Response
Silver 200 7G has a frequency range of 34-35k Hz whereas R-625FA has a frequency range of 38-21k Hz. With a minimum frequency of 34Hz, the Silver 200 7G can go slightly deeper then the R-625FA's min frequency of 38Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Monitor Audio Silver 200 7G
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Silver 200 7G and R-625FA have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Silver 200 7G sensitivity is rated at 87.5 dB and the R-625FA's is at 96 dB. This 8 dB difference makes the Klipsch R-625FA a more sensitive speaker compared to Monitor Audio Silver 200 7G, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Silver 200 7G can handle a max power of 150 watts RMS from the amp the whereas R-625FA has a max power handling value of 100 watts RMS, 50 watts less than the Silver 200 7G.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Silver 200 7G features Binding post posts which make bi-amping or bi-wiring possible. R-625FA has a Post which doesn't feature bi-amping/bi-wiring.
Klipsch R-625FA's Post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Silver 200 7G's and Klipsch R-625FA's external dimensions. Monitor Audio Silver 200 7G has external dimensions of 920.0 x 253.0 x 332.0mm ( 36-3/16 x 9-15/16 x 13-1/16inch) whereas Klipsch R-625FA has external dimensions of 1021.0 x 239.0 x 426.0mm ( 40-3/16 x 9-3/8 x 16-3/4inch) .
Monitor Audio Silver 200 7G is 101mm shorter and 94mm less deeper than Klipsch R-625FA but it is also 14mm wider.
Below you can see the front view size comparison of Monitor Audio Silver 200 7G and Klipsch R-625FA in scale.
Comparison image of Monitor Audio Silver 200 7G and Klipsch R-625FA Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Silver 200 7G is approximately 840.0cm2 / 130.2inch2 and base area of the Klipsch R-625FA is approximately 1018.1cm2 / 157.8inch2. The Silver 200 7G requires 17% less surface area than the R-625FA which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Silver 200 7G weighs 13.77kg / 30.3lbs and the Klipsch R-625FA weighs 22.20kg / 48.8lbs. This makes the R-625FA 61% heavier than the Silver 200 7G.
Here is a comparison of how Silver 200 7G and R-625FA's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Monitor Audio Silver 200 7G
What's in the Box of Monitor Audio Silver 200 7G?
Here are the items that are included inside the box of Silver 200 7G:
Floorstanding loudspeakerGrille4 Outrigger feet4 Rubber feet (pre-installed on outrigger feet)4 Spikes4 Bolts4 Machine screws2 Foam port plugs2 Hex-keysOwners ManualImportant Safety Instructions
What's in the Box of Klipsch R-625FA?
Here are the items that come with the R-625FA:
Floorstanding loudspeaker2 Grilles (installed)2 Feet4 ScrewsQuick Setup GuideImportant Safety InstructionsWarranty InformationLoudspeaker Feet note
 Max Input Power |
150 watts
vs
100 watts
|
Handle more power from your amplifier |
 Low Frequency Response |
34 Hz
vs
38 Hz
|
Generates deeper bass |
 High Frequency Response |
35k Hz
vs
21k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
920mm
vs
1021mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
840cm2
vs
1018cm2
|
Takes less floor space |
 Sensitivity |
96 dB
vs
88 dB
|
Play louder with same amount of amplification power |
|
Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
 Dolby Atmos Drivers |
Built-in 1 x 5.25
vs
No
|
Dolby Atmos Compatibility |
 Price per pair* |
1658USD
vs
2100USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Monitor Audio Silver 200 7G |
Klipsch Reference R-625FA |
| Brand |
Monitor Audio |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
60-150 watts |
up to 100 watts |
| Sensitivity |
87.5 dB |
96 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
34-35k Hz |
38-21k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
5.25" |
6.5" |
| Woofer Composition |
C-CAM RST II |
Copper-spun IMG |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
gold dome C-CAM with uniform dispersion (UD) waveguide |
n/a |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
2000Hz |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
920.0mm (36.2") |
1021.0mm (40.2") |
| Width |
253.0mm (10") |
239.0mm (9.4") |
| Depth |
332.0mm (13.1") |
426.0mm (16.8") |
| Weight |
13.77kg (30.3lbs) |
22.20kg (48.8lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood veneer |
MDF/Wood-grain vinyl |
| Available Colors |
Oak |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |