In this review, we will be comparing Platinum 200 3G and R11 Meta, two Passive Floor-standing speakers from Monitor Audio and KEF.
Let's have a brief look at the main features
of Monitor Audio Platinum 200 3G and KEF R11 Meta first before getting into our more
detailed comparison.
Monitor Audio Platinum 200 3G Key Specs
- 3-way Design
- 1" Tweeter
- 4" Midrange
- 6" RDT III Woofer
- 23-60k Hz Frequency Response
- 88dB Sensitivity
- Impedance: 4ohms
- Power Range:up to 300watts
- Weight:35.80kg
- Dimensions (H x W x D): 1041.0" x 14.5" x 17.8"( 1041.6 x 368.7 x 454.9 mm )
KEF R11 Meta Key Specs
- 3-way Design
- 12th Generation Uni-Q Driver
- 1" Vented dome Tweeter
- 5" Midrange
- 4 x 6.5" Hybrid Aluminum Woofer
- 5" Midrange
- 46-28 Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 4ohms
- Power Range:15-300watts
- Weight:36.59kg
- Dimensions (H x W x D): 1296.0" x 12-1/4" x 15-1/8"( 1296.0 x 312.0 x 385.0mm )
What size room are the Monitor Audio Platinum 200 3G and KEF R11 Meta speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Monitor Audio Platinum 200 3G |
KEF R11 Meta |
| Near-field |
Are you nuts? |
Are you nuts? |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Good |
Good |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Platinum 200 3G and KEF R11 Meta compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Platinum 200 3G and R11 Meta are 3-way speakers.
| Driver |
Monitor Audio Platinum 200 3G |
KEF R11 Meta |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 4-inch |
1 x 5-inch |
|
Woofer
|
1 x 6-inch
|
4 x 6.5-inch
|
Platinum 200 3G features a 1" MPD III Tweeter , a 4" Midrange and 1 x 6" RDT III Woofer with a Crossover frequency at 825 Hz - 3000Hz. On the other hand, the R11 Meta features a 1" Aluminum with MAT absorber Vented dome Tweeter , a 5" Midrange and 4 x 6.5" Hybrid Aluminum Woofer with a Crossover frequency at 330Hz and 2500Hz.
Frequency Response
Platinum 200 3G has a frequency range of 23-60k Hz whereas R11 Meta has a frequency range of 46-28 Hz. With a minimum frequency of 23Hz, the Platinum 200 3G can go significantly deeper on the low side and provide stronger bass compared to the R11 Meta's min frequency of 46Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Monitor Audio Platinum 200 3G
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Platinum 200 3G and R11 Meta have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Platinum 200 3G sensitivity is rated at 88dB and the R11 Meta's is at 90 dB. This 2 dB difference makes the KEF R11 Meta a more sensitive speaker compared to Monitor Audio Platinum 200 3G, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Platinum 200 3G and the Platinum 200 3G can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Platinum 200 3G and R11 Meta features dual binding post speaker terminals for bi-amping or bi-wiring.
Monitor Audio Platinum 200 3G's Binding post terminals allows Bi-amping or bi-wiring
KEF R11 Meta's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Platinum 200 3G and R11 Meta have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Monitor Audio Platinum 200 3G Port
KEF R11 Meta Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Platinum 200 3G's and KEF R11 Meta's external dimensions. Monitor Audio Platinum 200 3G has external dimensions of 1041.6 x 368.7 x 454.9 mm ( 41 x 14.5 x 17.8-inch) whereas KEF R11 Meta has external dimensions of 1296.0 x 312.0 x 385.0mm ( 51-inch x 12-1/4-inch x 15-1/8-inch) .
KEF R11 Meta is 56mm narrower and 70mm less deeper than Monitor Audio Platinum 200 3G but it is also 255mm taller.
Below you can see the front view size comparison of Monitor Audio Platinum 200 3G and KEF R11 Meta in scale.
Comparison image of Monitor Audio Platinum 200 3G and KEF R11 Meta Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Platinum 200 3G is approximately 1674.4cm2 / 259.5inch2 and base area of the KEF R11 Meta is approximately 1201.2cm2 / 186.2inch2. The Platinum 200 3G requires 39% more surface area than the R11 Meta which gives it a small disadvantage on placement in tight spaces.