In this review, we will be comparing Bronze 200 and S60, two Passive Floor-standing speakers from Monitor Audio and Polk Audio. Let's have a brief look at the main features
of Monitor Audio Bronze 200 and Polk S60 first before getting into our more
detailed comparison.
What size room are the Monitor Audio Bronze 200 and Polk S60 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Bronze 200 and Polk S60 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Bronze 200 and S60 are 2-way speakers.
| Driver |
Monitor Audio Bronze 200 |
Polk S60 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5.25-inch
|
3 x 6.5-inch
|
Bronze 200 features a 1" gold dome C-CAM with uniform dispersion (UD) waveguide Tweeter and 2 x 5.25" C-CAM Woofer . On the other hand, the S60 features a 1" Terylene Dome Tweeter and 3 x 6.5" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz.
Frequency Response
Bronze 200 has a frequency range of 35-30k Hz whereas S60 has a frequency range of 26-40k Hz. With a minimum frequency of 26Hz, the S60 can go significantly deeper on the low side and provide stronger bass compared to the Bronze 200's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Bronze 200 and S60 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Bronze 200 sensitivity is rated at 88 dB and the S60's is at 90 dB. This 2 dB difference makes the Polk S60 a more sensitive speaker compared to Monitor Audio Bronze 200, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Bronze 200 can handle a max power of 300 watts RMS from the amp the whereas Bronze 200 has a max power handling value of 120 watts RMS , 180 watts less than the S60.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Bronze 200 and S60 features dual binding post speaker terminals for bi-amping or bi-wiring.
Polk S60's 5-way post terminals allows Bi-amping or bi-wiring
Polk S60 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Bronze 200's and Polk S60's external dimensions. Monitor Audio Bronze 200 has external dimensions of 915.0 x 229.0 x 308.0mm ( 36 x 9 x 12-1/8inch) whereas Polk S60 has external dimensions of 1131.0 x 299.0 x 401.0mm ( 44-1/2 x 11-3/4 x 15-3/4inch) .
Polk S60 is clearly the larger of the two speakers. Its body is 70mm wider, 216mm taller and 93mm deeper than Monitor Audio Bronze 200.
Below you can see the front view size comparison of Monitor Audio Bronze 200 and Polk S60 in scale.
Comparison image of Monitor Audio Bronze 200 and Polk S60 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Bronze 200 is approximately 705.3cm2 / 109.3inch2 and base area of the Polk S60 is approximately 1199.0cm2 / 185.8inch2. The Bronze 200 requires 41% less surface area than the S60 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Bronze 200 weighs 12.84kg / 28.2lbs and the Polk S60 weighs 23.60kg / 51.9lbs. This makes the S60 84% heavier than the Bronze 200.
Here is a comparison of how Bronze 200 and S60's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Monitor Audio Bronze 200?
Here are the items that are included inside the box of Bronze 200:
Floorstanding loudspeakerGrille4 Outrigger feet (w/ 4 adjustment dials and locking-nuts)4 Spikes (pre-installed on outrigger feet)4 Rubber feet4 Large course-thread screws4 Small machine screws2 Terminal-jumpers (pre-installed)2 Foam port plugsHex-keyQuick Start GuideImportant Safety Instructions
What's in the Box of Polk S60?
Here are the items that come with the S60:
Floorstanding loudspeakerGrille (attached)4 Feet (pre-installed)Owners ManualOnline Product Registration
 Dolby Atmos Drivers |
Optional
vs
No
|
Dolby Atmos Compatibility |
 Height |
915mm
vs
1131mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
705cm2 (229x308mm)
vs
1199cm2 (299x401mm)
|
Takes less floor space |
 Max Input Power |
300 watts
vs
120 watts
|
Handle more power from your amplifier |
 Sensitivity |
90 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
| Number of Woofers |
3
vs
2
|
More woofers |
| Low Frequency Response |
26 Hz
vs
35 Hz
|
Generates deeper bass |
 High Frequency Response |
40k Hz
vs
30k Hz
|
Generates higher frequency |
 Price per pair* |
898USD
vs
1150USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Monitor Audio Bronze 200 |
Polk Audio Signature S60 |
| Brand |
Monitor Audio |
Polk Audio |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
40-120 watts |
20-300 watts |
| Sensitivity |
88 dB |
90 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
35-30k Hz |
26-40k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
3 |
| Woofer Size |
5.25" |
6.5" |
| Woofer Composition |
C-CAM |
Mica-reinforced polypropylene |
| Woofer Surround Material |
Rubber |
Butyl rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
gold dome C-CAM with uniform dispersion (UD) waveguide |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
2500Hz |
| Firing Direction |
n/a |
bottom |
Physical Specs |
|
|
| Height |
915.0mm (36") |
1131.0mm (44.5") |
| Width |
229.0mm (9") |
299.0mm (11.8") |
| Depth |
308.0mm (12.1") |
401.0mm (15.8") |
| Weight |
12.84kg (28.2lbs) |
23.60kg (51.9lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Vinyl |
Meddite MDF |
| Available Colors |
Black |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |