In this review, we will be comparing Motion XT C100 and Diamond 12.C, two Passive Center Channel speakers from MartinLogan and Wharfedale. Let's have a brief look at the main features
of MartinLogan Motion XT C100 and Wharfedale Diamond 12.C first before getting into our more
detailed comparison.
What size room are the MartinLogan Motion XT C100 and Wharfedale Diamond 12.C speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the MartinLogan Motion XT C100 and Wharfedale Diamond 12.C compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Motion XT C100 and Diamond 12.C are 2-way speakers.
Driver |
MartinLogan Motion XT C100 |
Wharfedale Diamond 12.C |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1.25 x 2.4-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
2 x 6.5-inch
|
2 x 5-inch
|
Motion XT C100 features a 1.25 x 2.4" Folded Motion XT Tweeter and 2 x 6.5" Aluminum Woofer with a Crossover frequency at 1300Hz and 2500Hz. On the other hand, the Diamond 12.C features a 1" woven polyester soft-dome Tweeter and 2 x 5" Klarity woofers (polypropylene and mica) Woofer with a Crossover frequency at 2000Hz.
Frequency Response
Motion XT C100 has a frequency range of 42-25k Hz whereas Diamond 12.C has a frequency range of 90-20k Hz. With a minimum frequency of 42Hz, the Motion XT C100 can go significantly deeper on the low side and provide stronger bass compared to the Diamond 12.C's min frequency of 90Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
MartinLogan Motion XT C100
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Motion XT C100 is a 5 ohms speaker compared to the Diamond 12.C which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. Motion XT C100 sensitivity is rated at 93 dB and the Diamond 12.C's is rated at 90 dB. This 3 dB difference makes the MartinLogan Motion XT C100 a more sensitive speaker compared to Wharfedale Diamond 12.C, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Motion XT C100 can handle a max power of 300 watts RMS from the amp the whereas Diamond 12.C has a max power handling value of 102 watts RMS, 198 watts less than the Motion XT C100.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Motion XT C100 and Diamond 12.C features dual binding post speaker terminals for bi-amping or bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MartinLogan Motion XT C100's and Wharfedale Diamond 12.C's external dimensions. MartinLogan Motion XT C100 has external dimensions of 203 x 610 x 368mm ( 8inch x 24inch x 14-1/2inch ) whereas Wharfedale Diamond 12.C has external dimensions of 181.0 x 482.0 x 221.0mm ( 7-1/8 x 18-15/16 x 8-11/16inch) .
MartinLogan Motion XT C100 is clearly the larger of the two speakers. Its body is 128mm wider, 22mm taller and 147mm deeper than Wharfedale Diamond 12.C.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MartinLogan Motion XT C100 is approximately 2244.8cm2 / 347.9inch2 and base area of the Wharfedale Diamond 12.C is approximately 1065.2cm2 / 165.1inch2. The Motion XT C100 requires 111% more surface area than the Diamond 12.C which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The MartinLogan Motion XT C100 weighs 15.40kg / 33.9lbs and the Wharfedale Diamond 12.C weighs 8.50kg / 18.7lbs. This makes the Motion XT C100 81% heavier than the Diamond 12.C.
Here is a comparison of how Motion XT C100 and Diamond 12.C's weights compare with the average, max and min weights in Passive Center Channel class.
Weight
All Center Channel Speakers
MartinLogan Motion XT C100
What's in the Box of Wharfedale Diamond 12.C?
Here are the items that come with the Diamond 12.C:
Center-channel loudspeakerGrille2 Jumper-bars(pre-installed)4 Self-adhesive rubber feetUser-feets Manual
Max Input Power |
300 watts
vs
102 watts
|
Handle more power from your amplifier |
Sensitivity |
93 dB
vs
90 dB
|
Play louder with same amount of amplification power |
Woofer Size |
6.5 inches
vs
5 inches
|
Larger woofer |
Low Frequency Response |
42 Hz
vs
90 Hz
|
Generates deeper bass |
High Frequency Response |
25k Hz
vs
20k Hz
|
Generates higher frequency |
Nominal Impedance |
8 ohms
vs
5 ohms
|
Less selective with amplifiers |
Height |
181mm
vs
203mm
|
Easier to fit in smaller spaces |
Base Surface Area |
1065cm2 (482x221mm)
vs
2244cm2 (610x368mm)
|
Takes less floor space |
Price per pair* |
349USD
vs
2998USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
MartinLogan Motion® XT C100 |
Wharfedale Diamond 12.C |
Brand |
MartinLogan |
Wharfedale |
Speaker Type |
Center channel speaker |
Center channel speaker |
Power Range |
20-300 watts |
20-102 watts |
Sensitivity |
93 dB |
90 dB |
Impedance |
5 ohms |
8 ohms |
Impedance |
n/a |
3.7 ohms |
Frequency Response |
42-25k Hz |
90-20k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
2 |
Woofer Size |
6.5" |
5" |
Woofer Composition |
Aluminum |
Klarity woofers (polypropylene and mica) |
Woofer Surround Material |
Rubber |
n/a |
Tweeter Size |
1.25 x 2.4" |
1" |
Tweeter Type |
Folded Motion XT |
soft-dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
1300Hz and 2500Hz |
2000Hz |
Firing Direction |
rear |
n/a |
Suggested Break-in Period |
Allow 72 hours of break-in |
n/a |
Physical Specs |
|
|
Height |
203.0mm (8") |
181.0mm (7.1") |
Width |
610.0mm (24") |
482.0mm (19") |
Depth |
368.0mm (14.5") |
221.0mm (8.7") |
Weight |
15.40kg (33.9lbs) |
8.50kg (18.7lbs) |
Enclosure |
Bass Reflex |
Acoustic Suspension |
Finish |
MDF/Wood veneer |
n/a |
Available Colors |
Gloss Black, Walnut, and Satin White |
White, Walnut, Black |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |