SpeakerDecision
  • SPEAKERS by TYPE
    • Passive Bookshelf Speakers
    • Passive Floor-standing Speakers
    • Passive Center Channel Speakers
    • Passive In-wall Speakers
    • All Passive Speakers
    • Powered Subwoofers
    • Powered Stereo Speakers
  • AMPLIFIERS
  • SMART FIND

Klipsch R-625FA vs Klipsch R-52C Comparison

x
Speaker to replace
Change

Klipsch R-625FA

Passive Floor-standing | 38-21k Hz

Klipsch Reference R-625FA
CHECK PRICE
Change
    
Klipsch R-52C

Passive Center Channel | 89-21k Hz

Klipsch Reference R-52C
CHECK PRICE
Klipsch R-625FA Klipsch R-625FA
See at AMAZON
Klipsch R-52C Klipsch R-52C
See at AMAZON
Klipsch R-625FA
See at AMAZON
Klipsch R-52C
See at AMAZON
Klipsch R-625FA vs Klipsch R-52C Speaker Comparison

In this review, we will be comparing two different type of speakers by Klipsch. Klipsch Reference R-625FA is a Floor-standing speaker whereas the R-52C is a Center Channel speaker.

Let's have a brief look at the main features of Klipsch R-625FA and Klipsch R-52C first before getting into our more detailed comparison.

Klipsch R-625FA Key Specs

  • 2-way Design
  • 1" Tweeter
  • 2 x 6.5" Copper-spun IMG Woofer
  • 38-21k Hz Frequency Response
  • 96 dB Sensitivity
  • Impedance: 8ohms
  • Power Range:up to 100watts
  • Weight:22.20kg
  • Dimensions (H x W x D): 1021.0" x 9-3/8" x 16-3/4"( 1021.0 x 239.0 x 426.0mm )

Klipsch R-52C Key Specs

  • 2-way Design
  • 1" Tractrix horn Tweeter
  • 2 x 5.25" copper spun IMG Woofer
  • 89-21k Hz Frequency Response
  • 95 dB Sensitivity
  • Impedance: 8ohms
  • Power Range:up to 100watts
  • Weight:3.18kg
  • Dimensions (H x W x D): 180.0" x 18-13/16" x 7-11/16"( 180.0 x 478.0 x 196.0mm )

What size room are the Klipsch R-625FA and Klipsch R-52C speakers good for?

The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:

Listening Environment* Klipsch R-625FA Klipsch R-52C
Near-field Poor Average
Small Room Average Good
Mid-size Room Good Average
Large Room Poor Poor
Very Large Room Bad Bad

(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2. Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)

In the following sections, we will get into more detail in order to better understand how the Klipsch R-625FA and Klipsch R-52C compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.


**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.


Drivers

Both R-625FA and R-52C are 2-way speakers.

Driver Klipsch R-625FA Klipsch R-52C
Driver Setup 2-way 2-way
Tweeter 1-inch 1-inch
Midrange - -
Woofer 2 x 6.5-inch 2 x 5.25-inch

R-625FA features a 1" Tweeter and 2 x 6.5" Copper-spun IMG Woofer with a Crossover frequency at 2000Hz. On the other hand, the R-52C features a 1" aluminum Tractrix horn Tweeter and 2 x 5.25" copper spun IMG Woofer .

Frequency Response

R-625FA has a frequency range of 38-21k Hz whereas R-52C has a frequency range of 89-21k Hz. With a minimum frequency of 38Hz, the R-625FA can go significantly deeper on the low side and provide stronger bass compared to the R-52C's min frequency of 89Hz.

Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.

Low Frequency

Floor-standing Speakers

R-625FA
R-52C
Min
Average
Max
High Frequency

Floor-standing Speakers

Klipsch R-625FA
Klipsch R-52C
Min
Average
Max

None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.

Impedance and Sensitivity

R-625FA and R-52C have the same Impedance of 8 ohms but where they differ is the sensitivity levels. R-625FA sensitivity is rated at 96 dB and the R-52C's is at 95 dB. This 1 dB difference makes the Klipsch R-625FA a more sensitive speaker compared to Klipsch R-52C, hence will play louder with the same amount of watts.

Sensitivity

Floor-standing Speakers

R-625FA
R-52C
Min
Average
Max

Power Range

Power range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.

R-625FA and R-52C has the same power range of up to 100 watts.

Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters such as Impedance, sensitivity and system efficiencies.

Input Type and Bi-Amping / Bi-Wiring

R-625FA features Binding post type posts and R-52C has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.

Klipsch R-625FA Terminals
Klipsch R-625FA's Post terminals

Klipsch R-52CBinding post Terminals
Klipsch R-52C's Binding post terminals

Physical Specs

Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-625FA's and Klipsch R-52C's external dimensions. Klipsch R-625FA has external dimensions of 1021.0 x 239.0 x 426.0mm ( 40-3/16 x 9-3/8 x 16-3/4inch) whereas Klipsch R-52C has external dimensions of 180.0 x 478.0 x 196.0mm ( 7-1/16 x 18-13/16 x 7-11/16inch) .

Klipsch R-52C is 841mm shorter and 230mm less deeper than Klipsch R-625FA but it is also 239mm wider.

Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited. The base surface area of the Klipsch R-625FA is approximately 1018.1cm2 / 157.8inch2 and base area of the Klipsch R-52C is approximately 936.9cm2 / 145.2inch2. The R-625FA requires 9% more surface area than the R-52C which gives it a small disadvantage on placement in tight spaces.

What's in the Box of Klipsch R-625FA?

Here are the items that are included inside the box of R-625FA:
  • Floorstanding loudspeaker
  • 2 Grilles (installed)
  • 2 Feet
  • 4 Screws
  • Quick Setup Guide
  • Important Safety Instructions
  • Warranty Information
  • Loudspeaker Feet note
  • What's in the Box of Klipsch R-52C?

    Here are the items that come with the R-52C:
  • Center-channel loudspeaker
  • Grille (installed)
  • 4 Self-adhesive rubber feet
  • Quick Setup Guide
  • Important Safety Instructions
  • Warranty Information

  • Reasons to choose Klipsch Reference R-625FA over Klipsch Reference R-52C
    Sensitivity 96 dB vs 95 dB Play louder with same amount of amplification power
    Woofer Size 6.5 inches vs 5.25 inches Larger woofer
    Low Frequency Response 38 Hz vs 89 Hz Generates deeper bass
    Dolby Atmos Drivers Built-in 1 x 5.25 vs No Dolby Atmos Compatibility

    Reasons to choose Klipsch Reference R-52C over Klipsch Reference R-625FA

    Height 180mm vs 1021mm Easier to fit in smaller spaces
    Base Surface Area 936cm2 vs 1018cm2 Takes less floor space
    Price per pair* 349USD vs 1658USD costs less (*prices may change depending on the seller, location and time)
    Klipsch R-625FA vs Klipsch R-52C Specs Table
    Detailed comparison of specifications
    General Klipsch Reference R-625FA Klipsch Reference R-52C
    Brand Klipsch Klipsch
    Speaker Type Floor-standing speaker Center channel speaker
    Power Range up to 100 watts up to 100 watts
    Sensitivity 96 dB 95 dB
    Impedance 8 ohms 8 ohms
    Frequency Response 38-21k Hz 89-21k Hz
    Drivers
    Woofer Quantity 2 2
    Woofer Size 6.5" 5.25"
    Woofer Composition Copper-spun IMG copper spun IMG
    Woofer Surround Material Rubber n/a
    Tweeter Size 1" 1"
    Tweeter Type n/a Tractrix horn
    Aimable Tweeter No No
    Midrange Driver No N/A"
    Crossover Frequency 2000Hz n/a
    Firing Direction rear n/a
    Physical Specs
    Height 1021.0mm (40.2") 180.0mm (7.1")
    Width 239.0mm (9.4") 478.0mm (18.8")
    Depth 426.0mm (16.8") 196.0mm (7.7")
    Weight 22.20kg (48.8lbs) 3.18kg (7lbs)
    Enclosure Bass Reflex Acoustic Suspension
    Finish MDF/Wood-grain vinyl wood grain vinyl
    Available Colors Black Black
    Grille Yes Yes
    Moisture Resistancy No No
    Connections
    Biamp Inputs No n/a
    Other
    Parts Warranty 5 Years 5 Years
    Labor Warranty 5 Years 5 Years

    Most Popular Speakers
    Klipsch Reference R-51M
    Klipsch R-51M
    2-way | 93 dB | 8 ohms
    Wharfedale Elysian 2
    Wharfedale Elysian 2
    3-way | 89 dB | 4 ohms
    ELAC Debut 2.0 B6.2
    ELAC Debut 2.0 B6.2
    2-way | 87 dB | 6 ohms
    Bowers & Wilkins 606 S2 Anniversary Edition
    B&W 606 S2
    2-way | 88 dB | 8 ohms
    KEF Q150
    KEF Q150
    2-way | 86 dB | 8 ohms
    Klipsch Reference Premiere RP-500M
    Klipsch RP-500M
    2-way | 93 dB | 8 ohms
    Wharfedale EVO4.1
    Wharfedale EVO4.1
    2-way | 87 dB | 8 ohms
    Bowers & Wilkins 606
    B&W 606
    2-way | 88 dB | 8 ohms
    Copyright © 2025 by SpeakerDecision
    About Privacy Contact US Camera Decision

    Report a Correction