In this review, we will be comparing R-15PM and YU2, two Powered Bookshelf speakers from Klipsch and Kanto. Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them.
Let's have a brief look at the main features
of Klipsch R-15PM and Kanto YU2 first before getting into our more
detailed comparison.
Klipsch R-15PM Key Specs
- 2-way Design
- 100-watt RMS Integrated Amplifier
- 1.0" Hard-Dome Tweeter
- 5.25" Copper-spun IMG Woofer
- 62-24k Hz Frequency Response
- 24-bit Max Depth / 96 kHz Max Sample Rate
- Built-in 3.0 Bluetooth
- Weight:4.67kg
- Dimensions (H x W x D): 317.5" x 7" x 9.875"( 317.5 x 177.8 x 250.8mm )
Kanto YU2 Key Specs
- 2-way Design
- 50-watt RMS( 100-watt Peak) Integrated Amplifier
- 0.75" Soft-Dome Tweeter
- 3" Kevlar Woofer
- 80-20k Hz Frequency Response
- 24-bit Max Depth / 96 kHz Max Sample Rate
- No Bluetooth
- Weight:1.30kg
- Dimensions (H x W x D): 150.0" x 3.9" x 5.3"( 150.0 x 100.0 x 135.0mm )
In the following sections, we will get into more detail in order to better understand how the Klipsch R-15PM and Kanto YU2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both R-15PM and YU2 are 2-way speakers.
| Driver |
Klipsch R-15PM |
Kanto YU2 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.0-inch
|
0.75-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 3-inch
|
R-15PM features a 1.0" Aluminum Hard-Dome Tweeter and 1 x 5.25" Copper-spun IMG Woofer with a Crossover frequency at 1800Hz. On the other hand, the YU2 features a 0.75" Silk Soft-Dome Tweeter and 1 x 3" Kevlar Woofer .
Frequency Response
R-15PM has a frequency range of 62-24k Hz whereas YU2 has a frequency range of 80-20k Hz. With a minimum frequency of 62Hz, the R-15PM can go significantly deeper on the low side and provide stronger bass compared to the YU2's min frequency of 80Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Cabinet Type and Port Position
Both R-15PM and YU2 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-15PM's and Kanto YU2's external dimensions. Klipsch R-15PM has external dimensions of 317.5 x 177.8 x 250.8mm ( 12.5 x 7 x 9.875inch) whereas Kanto YU2 has external dimensions of 150.0 x 100.0 x 135.0mm ( 5.90 x 3.9 x 5.3inch) .
Klipsch R-15PM is clearly the larger of the two speakers. Its body is 77.8mm wider, 167.5mm taller and 115.8mm deeper than Kanto YU2.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-15PM is approximately 445.9cm2 / 69.1inch2 and base area of the Kanto YU2 is approximately 135.0cm2 / 20.9inch2. The R-15PM requires 230% more surface area than the YU2 which gives it a small disadvantage on placement in tight spaces.