In this review, we will be comparing RP-8060FA II and S 809, two Passive Floor-standing speakers from Klipsch and Jamo. Let's have a brief look at the main features
of Klipsch RP-8060FA II and Jamo S 809 first before getting into our more
detailed comparison.
What size room are the Klipsch RP-8060FA II and Jamo S 809 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-8060FA II and Jamo S 809 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-8060FA II and S 809 are 2-way speakers.
Driver |
Klipsch RP-8060FA II |
Jamo S 809 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
2 x 8-inch
|
3 x 5-inch
|
RP-8060FA II features a 1" titanium Tractrix Horn Tweeter and 2 x 8" Cerametallic Woofer with a Crossover frequency at 1630 Hz. On the other hand, the S 809 features a 1" Tweeter and 3 x 5" Aluminized Polyfiber Woofer with a Crossover frequency at 2000Hz.
Frequency Response
RP-8060FA II has a frequency range of 35-25k Hz whereas S 809 has a frequency range of 37-26k Hz. With a minimum frequency of 35Hz, the RP-8060FA II can go slightly deeper then the S 809's min frequency of 37Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-8060FA II and S 809 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-8060FA II sensitivity is rated at 98 dB and the S 809's is at 90 dB. This 8 dB difference makes the Klipsch RP-8060FA II a more sensitive speaker compared to Jamo S 809, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RP-8060FA II can handle a max power of 150 watts RMS from the amp the whereas S 809 has a max power handling value of 120 watts RMS, 30 watts less than the RP-8060FA II.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-8060FA II features Binding post posts which make bi-amping or bi-wiring possible. S 809 has a Post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
RP-8060FA II has a rear firing port whereas S 809 has a front firing ports. Jamo S 809's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch RP-8060FA II with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-8060FA II's and Jamo S 809's external dimensions. Klipsch RP-8060FA II has external dimensions of 1099.0 x 277.0 x 528.0mm ( 43-1/8 x 10-7/8 x 20-13/16inch) whereas Jamo S 809 has external dimensions of 1042.0 x 191.0 x 252.0mm ( 41.0 x 7.5 x 9.9inch) .
Klipsch RP-8060FA II is clearly the larger of the two speakers. Its body is 86mm wider, 57mm taller and 276mm deeper than Jamo S 809.
Below you can see the front view size comparison of Klipsch RP-8060FA II and Jamo S 809 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-8060FA II is approximately 1462.6cm2 / 226.7inch2 and base area of the Jamo S 809 is approximately 481.3cm2 / 74.6inch2. The RP-8060FA II requires 204% more surface area than the S 809 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch RP-8060FA II weighs 34.40kg / 75.7lbs and the Jamo S 809 weighs 13.60kg / 29.9lbs. This makes the RP-8060FA II 153% heavier than the S 809.
Here is a comparison of how RP-8060FA II and S 809's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Klipsch RP-8060FA II?
Here are the items that are included inside the box of RP-8060FA II:
Floorstanding loudspeakerStabilizer feet (pre-installed)Front grilleTop grille (pre-installed)2 Terminal jumpers (pre-installed)Rubber cap (pre-installed)User ManualImportant Safety InstructionsWarranty Information
What's in the Box of Jamo S 809?
Here are the items that come with the S 809:
2 Floorstanding loudspeakers2 Grilles8 Mounting feet16 ScrewsUser ManualImportant Safety InstructionsWarranty Information
Max Input Power |
150 watts
vs
120 watts
|
Handle more power from your amplifier |
Sensitivity |
98 dB
vs
90 dB
|
Play louder with same amount of amplification power |
Woofer Size |
8 inches
vs
5 inches
|
Larger woofer |
Low Frequency Response |
35 Hz
vs
37 Hz
|
Generates deeper bass |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Dolby Atmos Drivers |
Built-in one 6.5 inch woofer and one 1-inch tweeter
vs
Optional
|
Dolby Atmos Ready |
Number of Woofers |
3
vs
2
|
More woofers |
High Frequency Response |
26k Hz
vs
25k Hz
|
Generates higher frequency |
Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
Height |
1042mm
vs
1099mm
|
Easier to fit in smaller spaces |
Base Surface Area |
481cm2 (191x252mm)
vs
1462cm2 (277x528mm)
|
Takes less floor space |
Price per pair* |
634USD
vs
2998USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Klipsch Reference Premiere RP-8060FA II |
Jamo Studio S 809 |
Brand |
Klipsch |
Jamo |
Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
Power Range |
up to 150 watts |
120 watts |
Sensitivity |
98 dB |
90 dB |
Impedance |
8 ohms |
8 ohms |
Frequency Response |
35-25k Hz |
37-26k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
3 |
Woofer Size |
8" |
5" |
Woofer Composition |
Cerametallic |
Aluminized Polyfiber |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Tractrix Horn |
n/a |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
1630 Hz |
2000Hz |
Firing Direction |
rear |
front |
Physical Specs |
|
|
Height |
1099.0mm (43.3") |
1042.0mm (41") |
Width |
277.0mm (10.9") |
191.0mm (7.5") |
Depth |
528.0mm (20.8") |
252.0mm (9.9") |
Weight |
34.40kg (75.7lbs) |
13.60kg (29.9lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood-grain vinyl |
MDF/Vinyl |
Available Colors |
Walnut, Ebony |
Walnut |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |