In this review, we will be comparing RP-6000F and RTi A5, two Passive Floor-standing speakers from Klipsch and Polk Audio.
Let's have a brief look at the main features
of Klipsch RP-6000F and Polk RTi A5 first before getting into our more
detailed comparison.
Klipsch RP-6000F Key Specs
- 2-way Design
- 1" Tractrix Horn Tweeter
- 2 x 6.5" Cerametallic Woofer
- 34-25k Hz Frequency Response
- 97 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 125watts
- Weight:22.27kg
- Dimensions (H x W x D): 1010.0" x 9-5/16" x 17"( 1010.0 x 237.0 x 432.0mm )
Polk RTi A5 Key Specs
- 2-way Design
- 1" Tweeter
- 2 x 6.5" Polymer composite Woofer
- 40-26k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:20-250watts
- Weight:18.18kg
- Dimensions (H x W x D): 1007.0" x 10-9/16" x 15-7/8"( 1007.0 x 269.0 x 404.0mm )
What size room are the Klipsch RP-6000F and Polk RTi A5 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Klipsch RP-6000F |
Polk RTi A5 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Poor |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-6000F and Polk RTi A5 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-6000F and RTi A5 are 2-way speakers.
| Driver |
Klipsch RP-6000F |
Polk RTi A5 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6.5-inch
|
2 x 6.5-inch
|
RP-6000F features a 1" Tractrix Horn Tweeter and 2 x 6.5" Cerametallic Woofer . On the other hand, the RTi A5 features a 1" Tweeter and 2 x 6.5" Polymer composite Woofer .
Frequency Response
RP-6000F has a frequency range of 34-25k Hz whereas RTi A5 has a frequency range of 40-26k Hz. With a minimum frequency of 34Hz, the RP-6000F can go significantly deeper on the low side and provide stronger bass compared to the RTi A5's min frequency of 40Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-6000F and RTi A5 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-6000F sensitivity is rated at 97 dB and the RTi A5's is at 90 dB. This 7 dB difference makes the Klipsch RP-6000F a more sensitive speaker compared to Polk RTi A5, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
RP-6000F can handle a max power of 250 watts RMS from the amp the whereas RP-6000F has a max power handling value of 125 watts RMS , 125 watts less than the RTi A5.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both RP-6000F and RTi A5 features dual binding post speaker terminals for bi-amping or bi-wiring.
Klipsch RP-6000F's Post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
RP-6000F has a rear firing port whereas RTi A5 has a front firing ports. Polk RTi A5's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch RP-6000F with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-6000F's and Polk RTi A5's external dimensions. Klipsch RP-6000F has external dimensions of 1010.0 x 237.0 x 432.0mm ( 39-3/4 x 9-5/16 x 17inch) whereas Polk RTi A5 has external dimensions of 1007.0 x 269.0 x 404.0mm ( 39-5/8 x 10-9/16 x 15-7/8inch) .
Polk RTi A5 is 3mm shorter and 28mm less deeper than Klipsch RP-6000F but it is also 32mm wider.
Below you can see the front view size comparison of Klipsch RP-6000F and Polk RTi A5 in scale.
Comparison image of Klipsch RP-6000F and Polk RTi A5 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-6000F is approximately 1023.8cm2 / 158.7inch2 and base area of the Polk RTi A5 is approximately 1086.8cm2 / 168.5inch2. The RP-6000F requires 6% less surface area than the RTi A5 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch RP-6000F weighs 22.27kg / 49lbs and the Polk RTi A5 weighs 18.18kg / 40lbs. This makes the RP-6000F 22% heavier than the RTi A5.
Here is a comparison of how RP-6000F and RTi A5's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Klipsch RP-6000F?
Here are the items that are included inside the box of RP-6000F:
Floorstanding loudspeakerStabilizer feet (installed)Grille (installed)2 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information
What's in the Box of Polk RTi A5?
Here are the items that come with the RTi A5:
Cherry floor-standing speakerDetachable black cloth grille4 Screw-on spike feetOwners ManualOnline registration sheetPolk Audio product brochure
 Sensitivity |
97 dB
vs
90 dB
|
Play louder with same amount of amplification power |
 Low Frequency Response |
34 Hz
vs
40 Hz
|
Generates deeper bass |
 Base Surface Area |
1023cm2
vs
1086cm2
|
Takes less floor space |
 Max Input Power |
250 watts
vs
125 watts
|
Handle more power from your amplifier |
 High Frequency Response |
26k Hz
vs
25k Hz
|
Generates higher frequency |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Height |
1007mm
vs
1010mm
|
Easier to fit in smaller spaces |
| General |
Klipsch Reference Premiere RP-6000F |
Polk Audio RTi A5 |
| Brand |
Klipsch |
Polk Audio |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 125 watts |
20-250 watts |
| Sensitivity |
97 dB |
90 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
34-25k Hz |
40-26k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Cerametallic |
Polymer composite |
| Woofer Surround Material |
Rubber |
Butyl Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Tractrix Horn |
n/a |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
rear |
front |
Physical Specs |
|
|
| Height |
1010.0mm (39.8") |
1007.0mm (39.6") |
| Width |
237.0mm (9.3") |
269.0mm (10.6") |
| Depth |
432.0mm (17") |
404.0mm (15.9") |
| Weight |
22.27kg (49lbs) |
18.18kg (40lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
Real wood veneer |
| Available Colors |
Walnut, Black |
Cherry |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |