In this review, we will be comparing S 809 and RP-6000F, two Passive Floor-standing speakers from Jamo and Klipsch. Let's have a brief look at the main features
of Jamo S 809 and Klipsch RP-6000F first before getting into our more
detailed comparison.
What size room are the Jamo S 809 and Klipsch RP-6000F speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Jamo S 809 and Klipsch RP-6000F compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both S 809 and RP-6000F are 2-way speakers.
| Driver |
Jamo S 809 |
Klipsch RP-6000F |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
3 x 5-inch
|
2 x 6.5-inch
|
S 809 features a 1" Tweeter and 3 x 5" Aluminized Polyfiber Woofer with a Crossover frequency at 2000Hz. On the other hand, the RP-6000F features a 1" Tractrix Horn Tweeter and 2 x 6.5" Cerametallic Woofer .
Frequency Response
S 809 has a frequency range of 37-26k Hz whereas RP-6000F has a frequency range of 34-25k Hz. With a minimum frequency of 34Hz, the RP-6000F can go slightly deeper then the S 809's min frequency of 37Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
S 809 and RP-6000F have the same Impedance of 8 ohms but where they differ is the sensitivity levels. S 809 sensitivity is rated at 90 dB and the RP-6000F's is at 97 dB. This 7 dB difference makes the Klipsch RP-6000F a more sensitive speaker compared to Jamo S 809, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
S 809 can handle a max power of 125 watts RMS from the amp the whereas S 809 has a max power handling value of 120 watts RMS , 5 watts less than the RP-6000F.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-6000F features Post posts which make bi-amping or bi-wiring possible. S 809 has a Post which doesn't feature bi-amping/bi-wiring.
Jamo S 809's Post terminals
Klipsch RP-6000F's Post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
S 809 has a front firing port whereas RP-6000F has a rear firing ports. Jamo S 809's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch RP-6000F with its rear-firing port.
Jamo S 809 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Jamo S 809's and Klipsch RP-6000F's external dimensions. Jamo S 809 has external dimensions of 1042.0 x 191.0 x 252.0mm ( 41.0 x 7.5 x 9.9inch) whereas Klipsch RP-6000F has external dimensions of 1010.0 x 237.0 x 432.0mm ( 39-3/4 x 9-5/16 x 17inch) .
Jamo S 809 is 46mm narrower and 180mm less deeper than Klipsch RP-6000F but it is also 32mm taller.
Below you can see the front view size comparison of Jamo S 809 and Klipsch RP-6000F in scale.
Comparison image of Jamo S 809 and Klipsch RP-6000F Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Jamo S 809 is approximately 481.3cm2 / 74.6inch2 and base area of the Klipsch RP-6000F is approximately 1023.8cm2 / 158.7inch2. The S 809 requires 53% less surface area than the RP-6000F which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Jamo S 809 weighs 13.60kg / 29.9lbs and the Klipsch RP-6000F weighs 22.27kg / 49lbs. This makes the RP-6000F 64% heavier than the S 809.
Here is a comparison of how S 809 and RP-6000F's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Jamo S 809?
Here are the items that are included inside the box of S 809:
2 Floorstanding loudspeakers2 Grilles8 Mounting feet16 ScrewsUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of Klipsch RP-6000F?
Here are the items that come with the RP-6000F:
Floorstanding loudspeakerStabilizer feet (installed)Grille (installed)2 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information
 Number of Woofers |
3
vs
2
|
More woofers |
 High Frequency Response |
26k Hz
vs
25k Hz
|
Generates higher frequency |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Dolby Atmos Drivers |
Optional Jamo S 8 ATM Dolby Atmos upward-firing speakers
vs
No
|
Dolby Atmos Compatibility |
 Base Surface Area |
481cm2 (191x252mm)
vs
1023cm2 (237x432mm)
|
Takes less floor space |
 Price per pair* |
634USD
vs
1378USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
125 watts
vs
120 watts
|
Handle more power from your amplifier |
 Sensitivity |
97 dB
vs
90 dB
|
Play louder with same amount of amplification power |
| Woofer Size |
6.5 inches
vs
5 inches
|
Larger woofer |
| Low Frequency Response |
34 Hz
vs
37 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
1010mm
vs
1042mm
|
Easier to fit in smaller spaces |
| General |
Jamo Studio S 809 |
Klipsch Reference Premiere RP-6000F |
| Brand |
Jamo |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
120 watts |
up to 125 watts |
| Sensitivity |
90 dB |
97 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
37-26k Hz |
34-25k Hz |
Drivers |
|
|
| Woofer Quantity |
3 |
2 |
| Woofer Size |
5" |
6.5" |
| Woofer Composition |
Aluminized Polyfiber |
Cerametallic |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
n/a |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2000Hz |
n/a |
| Firing Direction |
front |
rear |
Physical Specs |
|
|
| Height |
1042.0mm (41") |
1010.0mm (39.8") |
| Width |
191.0mm (7.5") |
237.0mm (9.3") |
| Depth |
252.0mm (9.9") |
432.0mm (17") |
| Weight |
13.60kg (29.9lbs) |
22.27kg (49lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Walnut |
Walnut, Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |